lkml.org 
[lkml]   [2018]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] can: m_can: Move accessing of message ram to after clocks are enabled
Date
MCAN message ram should only be accessed once clocks are enabled.
Therefore, move the call to parse/init the message ram to after
clocks are enabled.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
---
Changes in v2:

rebased to latest mainline

drivers/net/can/m_can/m_can.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index ac4c6dc2f8c8..04c48371ab2a 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -1644,8 +1644,6 @@ static int m_can_plat_probe(struct platform_device *pdev)
priv->can.clock.freq = clk_get_rate(cclk);
priv->mram_base = mram_addr;

- m_can_of_parse_mram(priv, mram_config_vals);
-
platform_set_drvdata(pdev, dev);
SET_NETDEV_DEV(dev, &pdev->dev);

@@ -1668,6 +1666,8 @@ static int m_can_plat_probe(struct platform_device *pdev)
goto clk_disable;
}

+ m_can_of_parse_mram(priv, mram_config_vals);
+
devm_can_led_init(dev);

of_can_transceiver(dev);
@@ -1715,8 +1715,6 @@ static __maybe_unused int m_can_resume(struct device *dev)

pinctrl_pm_select_default_state(dev);

- m_can_init_ram(priv);
-
priv->can.state = CAN_STATE_ERROR_ACTIVE;

if (netif_running(ndev)) {
@@ -1726,6 +1724,7 @@ static __maybe_unused int m_can_resume(struct device *dev)
if (ret)
return ret;

+ m_can_init_ram(priv);
m_can_start(ndev);
netif_device_attach(ndev);
netif_start_queue(ndev);
--
2.17.0
\
 
 \ /
  Last update: 2018-07-03 13:16    [W:0.068 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site