lkml.org 
[lkml]   [2018]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v7 0/2] hwmon: Add NPCM7xx PWM and Fan driver support
Date
This patch set adds Pulse Width Modulation (PWM) and Fan tacho
support for the Nuvoton NPCM750/730/715/705 Baseboard Management
Controller (BMC).

The Nuvoton BMC NPCM750/730/715/705 has two identical PWM controller
modules, each module has four PWM controller outputs and eight identical
Fan controller modules, each module has two Fan controller inputs.

The hwmon driver provides sysfs entries through which the user can
configure and get the duty cycle between 0 (disable the specific PWM)
to 255 of particular PWM output port and read the fan rpm values.

The driver support cooling device creation, that could be bound
to a thermal zone for the thermal control.

The NPCM750 PWM and Fan driver tested on NPCM750 evaluation board.

Addressed comment from:.
- Guenter Roeck: https://www.spinics.net/lists/kernel/msg2844266.html

Changes since version 6:
- Kconfig, Makefile and definitions alphabetic order.
- Error print prefix remove.
- dt-binding documentation haven't changed.

Changes since version 5:
- Removing unnececery lock.
- Modify dt-binding documentation.

Changes since version 4:
- Releasing Mutex before return from set PWM function.
- dt-binding documentation haven't changed.

Changes since version 3:
- Fixing incorrect word spelling.
- Removing npcm7xx_ in variable declarations.
- All variable declarations in structure on a single line.
- Removing variable unnecessary initialization.
- dt-binding documentation haven't changed.

Changes since version 2:
- Adding hwmon documentation
- Using dev_function instead pr_function
- Removing all typecast
- Removing unused definitions
- Adding () in macros parameters.
- dt-binding documentation haven't changed

Changes since version 1:
- Rename driver name
- Adding Fan Controller support
- Adding cooling device support
- Modifying dt-binding documentation for Fan and cooling binding

Tomer Maimon (2):
dt-binding: hwmon: Add NPCM7xx PWM and Fan controller documentation
hwmon: npcm750: add NPCM7xx PWM and Fan driver

.../devicetree/bindings/hwmon/npcm750-pwm-fan.txt | 87 ++
Documentation/hwmon/npcm750-pwm-fan | 22 +
drivers/hwmon/Kconfig | 7 +
drivers/hwmon/Makefile | 1 +
drivers/hwmon/npcm750-pwm-fan.c | 1057 ++++++++++++++++++++
5 files changed, 1174 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/npcm750-pwm-fan.txt
create mode 100644 Documentation/hwmon/npcm750-pwm-fan
create mode 100644 drivers/hwmon/npcm750-pwm-fan.c

--
2.14.1

\
 
 \ /
  Last update: 2018-07-03 11:49    [W:0.065 / U:4.592 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site