lkml.org 
[lkml]   [2018]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 2/2] clk: meson-axg: add clocks required by pcie driver
From
Date
On Mon, 2018-07-02 at 21:31 +0000, Yixun Lan wrote:
> Adding clocks for the pcie driver. Due to the ASIC design,
> the pcie controller re-use part of the mipi clock logic,
> so the mipi clock is also added.
>
> Tested-by: Jianxin Qin <jianxin.qin@amlogic.com>
> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
> ---
> drivers/clk/meson/axg.c | 148 ++++++++++++++++++++++++++++++++++++++++
> drivers/clk/meson/axg.h | 6 +-
> 2 files changed, 153 insertions(+), 1 deletion(-)
>
>

[...]

> +
> +/* skip the partent 0, it's for debug only */
> +static u32 mux_table_pcie_ref[] = { 1 };
> +static const char * const pcie_ref_parent_names[] = { "pcie_mux" };

Dropped these symbols.

> +
> +static struct clk_regmap axg_pcie_ref = {
> + .data = &(struct clk_regmap_mux_data){
> + .offset = HHI_PCIE_PLL_CNTL6,
> + .mask = 0x1,
> + .shift = 1,
> + .table = mux_table_pcie_ref,

Replaced with the table itself

> + },
> + .hw.init = &(struct clk_init_data){
> + .name = "pcie_ref",
> + .ops = &clk_regmap_mux_ops,
> + .parent_names = pcie_ref_parent_names,
> + .num_parents = ARRAY_SIZE(pcie_ref_parent_names),

Replaced with the table itself and applied. Thx

> + .flags = CLK_SET_RATE_PARENT,
> + },
> +};
> +
>

\
 
 \ /
  Last update: 2018-07-03 11:24    [W:0.112 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site