lkml.org 
[lkml]   [2018]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC v3 PATCH 4/5] mm: mmap: zap pages with read mmap_sem for large mapping
On Mon, Jul 02, 2018 at 10:19:32AM -0700, Yang Shi wrote:
>
>
> On 7/2/18 5:33 AM, Kirill A. Shutemov wrote:
> > On Sat, Jun 30, 2018 at 06:39:44AM +0800, Yang Shi wrote:
> > > When running some mmap/munmap scalability tests with large memory (i.e.
> > > > 300GB), the below hung task issue may happen occasionally.
> > > INFO: task ps:14018 blocked for more than 120 seconds.
> > > Tainted: G E 4.9.79-009.ali3000.alios7.x86_64 #1
> > > "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
> > > message.
> > > ps D 0 14018 1 0x00000004
> > > ffff885582f84000 ffff885e8682f000 ffff880972943000 ffff885ebf499bc0
> > > ffff8828ee120000 ffffc900349bfca8 ffffffff817154d0 0000000000000040
> > > 00ffffff812f872a ffff885ebf499bc0 024000d000948300 ffff880972943000
> > > Call Trace:
> > > [<ffffffff817154d0>] ? __schedule+0x250/0x730
> > > [<ffffffff817159e6>] schedule+0x36/0x80
> > > [<ffffffff81718560>] rwsem_down_read_failed+0xf0/0x150
> > > [<ffffffff81390a28>] call_rwsem_down_read_failed+0x18/0x30
> > > [<ffffffff81717db0>] down_read+0x20/0x40
> > > [<ffffffff812b9439>] proc_pid_cmdline_read+0xd9/0x4e0
> > > [<ffffffff81253c95>] ? do_filp_open+0xa5/0x100
> > > [<ffffffff81241d87>] __vfs_read+0x37/0x150
> > > [<ffffffff812f824b>] ? security_file_permission+0x9b/0xc0
> > > [<ffffffff81242266>] vfs_read+0x96/0x130
> > > [<ffffffff812437b5>] SyS_read+0x55/0xc0
> > > [<ffffffff8171a6da>] entry_SYSCALL_64_fastpath+0x1a/0xc5
> > >
> > > It is because munmap holds mmap_sem from very beginning to all the way
> > > down to the end, and doesn't release it in the middle. When unmapping
> > > large mapping, it may take long time (take ~18 seconds to unmap 320GB
> > > mapping with every single page mapped on an idle machine).
> > >
> > > It is because munmap holds mmap_sem from very beginning to all the way
> > > down to the end, and doesn't release it in the middle. When unmapping
> > > large mapping, it may take long time (take ~18 seconds to unmap 320GB
> > > mapping with every single page mapped on an idle machine).
> > >
> > > Zapping pages is the most time consuming part, according to the
> > > suggestion from Michal Hock [1], zapping pages can be done with holding
> > > read mmap_sem, like what MADV_DONTNEED does. Then re-acquire write
> > > mmap_sem to cleanup vmas. All zapped vmas will have VM_DEAD flag set,
> > > the page fault to VM_DEAD vma will trigger SIGSEGV.
> > >
> > > Define large mapping size thresh as PUD size or 1GB, just zap pages with
> > > read mmap_sem for mappings which are >= thresh value.
> > >
> > > If the vma has VM_LOCKED | VM_HUGETLB | VM_PFNMAP or uprobe, then just
> > > fallback to regular path since unmapping those mappings need acquire
> > > write mmap_sem.
> > >
> > > For the time being, just do this in munmap syscall path. Other
> > > vm_munmap() or do_munmap() call sites remain intact for stability
> > > reason.
> > >
> > > The below is some regression and performance data collected on a machine
> > > with 32 cores of E5-2680 @ 2.70GHz and 384GB memory.
> > >
> > > With the patched kernel, write mmap_sem hold time is dropped to us level
> > > from second.
> > >
> > > [1] https://lwn.net/Articles/753269/
> > >
> > > Cc: Michal Hocko <mhocko@kernel.org>
> > > Cc: Matthew Wilcox <willy@infradead.org>
> > > Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com>
> > > Cc: Andrew Morton <akpm@linux-foundation.org>
> > > Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
> > > ---
> > > mm/mmap.c | 136 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
> > > 1 file changed, 134 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/mm/mmap.c b/mm/mmap.c
> > > index 87dcf83..d61e08b 100644
> > > --- a/mm/mmap.c
> > > +++ b/mm/mmap.c
> > > @@ -2763,6 +2763,128 @@ static int munmap_lookup_vma(struct mm_struct *mm, struct vm_area_struct **vma,
> > > return 1;
> > > }
> > > +/* Consider PUD size or 1GB mapping as large mapping */
> > > +#ifdef HPAGE_PUD_SIZE
> > > +#define LARGE_MAP_THRESH HPAGE_PUD_SIZE
> > > +#else
> > > +#define LARGE_MAP_THRESH (1 * 1024 * 1024 * 1024)
> > > +#endif
> > PUD_SIZE is defined everywhere.
>
> If THP is defined, otherwise it is:
>
> #define HPAGE_PUD_SIZE ({ BUILD_BUG(); 0; })

I'm talking about PUD_SIZE, not HPAGE_PUD_SIZE.

--
Kirill A. Shutemov

\
 
 \ /
  Last update: 2018-07-03 10:09    [W:0.119 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site