[lkml]   [2018]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v1] ARM: dts: imx6sl-evk: keep sw4 always on
On 二, 2018-07-03 at 08:10 -0300, Fabio Estevam wrote:
> Hi Anson,
> On Tue, Jul 3, 2018 at 4:44 AM, Anson Huang <>
> wrote:
> >
> > It is NOT easy to identify which switch is critical or NOT, and
> > different platforms
> > have different board design, it will introduce many platform
> > specified code, so I think
> > just revert the pfuze100 switch enable/disable patch should be OK
> > for now.
> I have sent the pfuze100 regulator patch revert and it is linux-next
> now. Should probably reach 4.18-rc4.
> >
> > After a couple of release cycles, add the pfuze100 switch
> > enable/disable patch
> > back to support this feature, I believe users should switch to new
> > dtb with "regulator-always-on"
> > existing already.
> That will still break old dtb compatibility.
> You cannot force users to use "regulator-always-on" and the old dtbs
> need to always work.
> So whatever new feature you need to introduce it needs to be done in
> such a way that the existing dtb's will continue working.
But actually existing dtb is not right since the critical power rail
missing 'regulator-always-on'. It's a fix patch for dts, not related
with following dtb/kernel break rules, just a simple dts patch. Why
should we make promise for the wrong dtbs?
 \ /
  Last update: 2018-07-04 03:44    [W:0.126 / U:4.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site