lkml.org 
[lkml]   [2018]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 05/32] mtd: rawnand: denali: convert to nand_scan()
Date
Two helpers have been added to the core to make ECC-related
configuration between the detection phase and the final NAND scan. Use
these hooks and convert the driver to just use nand_scan() instead of
both nand_scan_ident() and nand_scan_tail().

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
drivers/mtd/nand/raw/denali.c | 134 +++++++++++++++++++++++-------------------
1 file changed, 73 insertions(+), 61 deletions(-)

diff --git a/drivers/mtd/nand/raw/denali.c b/drivers/mtd/nand/raw/denali.c
index 4d53f41ada08..09b85d749552 100644
--- a/drivers/mtd/nand/raw/denali.c
+++ b/drivers/mtd/nand/raw/denali.c
@@ -1205,62 +1205,12 @@ static int denali_multidev_fixup(struct denali_nand_info *denali)
return 0;
}

-int denali_init(struct denali_nand_info *denali)
+static int denali_attach_chip(struct nand_chip *chip)
{
- struct nand_chip *chip = &denali->nand;
struct mtd_info *mtd = nand_to_mtd(chip);
- u32 features = ioread32(denali->reg + FEATURES);
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
int ret;

- mtd->dev.parent = denali->dev;
- denali_hw_init(denali);
-
- init_completion(&denali->complete);
- spin_lock_init(&denali->irq_lock);
-
- denali_clear_irq_all(denali);
-
- ret = devm_request_irq(denali->dev, denali->irq, denali_isr,
- IRQF_SHARED, DENALI_NAND_NAME, denali);
- if (ret) {
- dev_err(denali->dev, "Unable to request IRQ\n");
- return ret;
- }
-
- denali_enable_irq(denali);
- denali_reset_banks(denali);
-
- denali->active_bank = DENALI_INVALID_BANK;
-
- nand_set_flash_node(chip, denali->dev->of_node);
- /* Fallback to the default name if DT did not give "label" property */
- if (!mtd->name)
- mtd->name = "denali-nand";
-
- chip->select_chip = denali_select_chip;
- chip->read_byte = denali_read_byte;
- chip->write_byte = denali_write_byte;
- chip->read_word = denali_read_word;
- chip->cmd_ctrl = denali_cmd_ctrl;
- chip->dev_ready = denali_dev_ready;
- chip->waitfunc = denali_waitfunc;
-
- if (features & FEATURES__INDEX_ADDR) {
- denali->host_read = denali_indexed_read;
- denali->host_write = denali_indexed_write;
- } else {
- denali->host_read = denali_direct_read;
- denali->host_write = denali_direct_write;
- }
-
- /* clk rate info is needed for setup_data_interface */
- if (denali->clk_rate && denali->clk_x_rate)
- chip->setup_data_interface = denali_setup_data_interface;
-
- ret = nand_scan_ident(mtd, denali->max_banks, NULL);
- if (ret)
- goto disable_irq;
-
if (ioread32(denali->reg + FEATURES) & FEATURES__DMA)
denali->dma_avail = 1;

@@ -1293,7 +1243,7 @@ int denali_init(struct denali_nand_info *denali)
mtd->oobsize - denali->oob_skip_bytes);
if (ret) {
dev_err(denali->dev, "Failed to setup ECC settings.\n");
- goto disable_irq;
+ return ret;
}

dev_dbg(denali->dev,
@@ -1337,7 +1287,7 @@ int denali_init(struct denali_nand_info *denali)

ret = denali_multidev_fixup(denali);
if (ret)
- goto disable_irq;
+ return ret;

/*
* This buffer is DMA-mapped by denali_{read,write}_page_raw. Do not
@@ -1345,26 +1295,88 @@ int denali_init(struct denali_nand_info *denali)
* guarantee DMA-safe alignment.
*/
denali->buf = kmalloc(mtd->writesize + mtd->oobsize, GFP_KERNEL);
- if (!denali->buf) {
- ret = -ENOMEM;
- goto disable_irq;
+ if (!denali->buf)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static void denali_detach_chip(struct nand_chip *chip)
+{
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+
+ kfree(denali->buf);
+}
+
+int denali_init(struct denali_nand_info *denali)
+{
+ struct nand_chip *chip = &denali->nand;
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ u32 features = ioread32(denali->reg + FEATURES);
+ int ret;
+
+ mtd->dev.parent = denali->dev;
+ denali_hw_init(denali);
+
+ init_completion(&denali->complete);
+ spin_lock_init(&denali->irq_lock);
+
+ denali_clear_irq_all(denali);
+
+ ret = devm_request_irq(denali->dev, denali->irq, denali_isr,
+ IRQF_SHARED, DENALI_NAND_NAME, denali);
+ if (ret) {
+ dev_err(denali->dev, "Unable to request IRQ\n");
+ return ret;
}

- ret = nand_scan_tail(mtd);
+ denali_enable_irq(denali);
+ denali_reset_banks(denali);
+
+ denali->active_bank = DENALI_INVALID_BANK;
+
+ nand_set_flash_node(chip, denali->dev->of_node);
+ /* Fallback to the default name if DT did not give "label" property */
+ if (!mtd->name)
+ mtd->name = "denali-nand";
+
+ chip->select_chip = denali_select_chip;
+ chip->read_byte = denali_read_byte;
+ chip->write_byte = denali_write_byte;
+ chip->read_word = denali_read_word;
+ chip->cmd_ctrl = denali_cmd_ctrl;
+ chip->dev_ready = denali_dev_ready;
+ chip->waitfunc = denali_waitfunc;
+
+ if (features & FEATURES__INDEX_ADDR) {
+ denali->host_read = denali_indexed_read;
+ denali->host_write = denali_indexed_write;
+ } else {
+ denali->host_read = denali_direct_read;
+ denali->host_write = denali_direct_write;
+ }
+
+ /* clk rate info is needed for setup_data_interface */
+ if (denali->clk_rate && denali->clk_x_rate)
+ chip->setup_data_interface = denali_setup_data_interface;
+
+ chip->hwcontrol.attach_chip = denali_attach_chip;
+ chip->hwcontrol.detach_chip = denali_detach_chip;
+ ret = nand_scan(mtd, denali->max_banks);
if (ret)
- goto free_buf;
+ goto disable_irq;

ret = mtd_device_register(mtd, NULL, 0);
if (ret) {
dev_err(denali->dev, "Failed to register MTD: %d\n", ret);
goto cleanup_nand;
}
+
return 0;

cleanup_nand:
nand_cleanup(chip);
-free_buf:
- kfree(denali->buf);
disable_irq:
denali_disable_irq(denali);

--
2.14.1
\
 
 \ /
  Last update: 2018-07-04 00:08    [W:0.122 / U:9.640 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site