lkml.org 
[lkml]   [2018]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 15/32] mtd: rawnand: mtk: convert driver to nand_scan()
Date
Two helpers have been added to the core to make ECC-related
configuration between the detection phase and the final NAND scan. Use
these hooks and convert the driver to just use nand_scan() instead of
both nand_scan_ident() and nand_scan_tail().

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
drivers/mtd/nand/raw/mtk_nand.c | 71 +++++++++++++++++++++++------------------
1 file changed, 40 insertions(+), 31 deletions(-)

diff --git a/drivers/mtd/nand/raw/mtk_nand.c b/drivers/mtd/nand/raw/mtk_nand.c
index 75c845adb050..a81cd36596e1 100644
--- a/drivers/mtd/nand/raw/mtk_nand.c
+++ b/drivers/mtd/nand/raw/mtk_nand.c
@@ -1250,13 +1250,50 @@ static int mtk_nfc_ecc_init(struct device *dev, struct mtd_info *mtd)
return 0;
}

+static int mtk_nfc_attach_chip(struct nand_chip *chip)
+{
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ struct device *dev = mtd->dev.parent;
+ struct mtk_nfc *nfc = nand_get_controller_data(chip);
+ struct mtk_nfc_nand_chip *mtk_nand = to_mtk_nand(chip);
+ int len;
+ int ret;
+
+ if (chip->options & NAND_BUSWIDTH_16) {
+ dev_err(dev, "16bits buswidth not supported");
+ return -EINVAL;
+ }
+
+ /* store bbt magic in page, cause OOB is not protected */
+ if (chip->bbt_options & NAND_BBT_USE_FLASH)
+ chip->bbt_options |= NAND_BBT_NO_OOB;
+
+ ret = mtk_nfc_ecc_init(dev, mtd);
+ if (ret)
+ return ret;
+
+ ret = mtk_nfc_set_spare_per_sector(&mtk_nand->spare_per_sector, mtd);
+ if (ret)
+ return ret;
+
+ mtk_nfc_set_fdm(&mtk_nand->fdm, mtd);
+ mtk_nfc_set_bad_mark_ctl(&mtk_nand->bad_mark, mtd);
+
+ len = mtd->writesize + mtd->oobsize;
+ nfc->buffer = devm_kzalloc(dev, len, GFP_KERNEL);
+ if (!nfc->buffer)
+ return -ENOMEM;
+
+ return 0;
+}
+
static int mtk_nfc_nand_chip_init(struct device *dev, struct mtk_nfc *nfc,
struct device_node *np)
{
struct mtk_nfc_nand_chip *chip;
struct nand_chip *nand;
struct mtd_info *mtd;
- int nsels, len;
+ int nsels;
u32 tmp;
int ret;
int i;
@@ -1324,36 +1361,8 @@ static int mtk_nfc_nand_chip_init(struct device *dev, struct mtk_nfc *nfc,

mtk_nfc_hw_init(nfc);

- ret = nand_scan_ident(mtd, nsels, NULL);
- if (ret)
- return ret;
-
- /* store bbt magic in page, cause OOB is not protected */
- if (nand->bbt_options & NAND_BBT_USE_FLASH)
- nand->bbt_options |= NAND_BBT_NO_OOB;
-
- ret = mtk_nfc_ecc_init(dev, mtd);
- if (ret)
- return -EINVAL;
-
- if (nand->options & NAND_BUSWIDTH_16) {
- dev_err(dev, "16bits buswidth not supported");
- return -EINVAL;
- }
-
- ret = mtk_nfc_set_spare_per_sector(&chip->spare_per_sector, mtd);
- if (ret)
- return ret;
-
- mtk_nfc_set_fdm(&chip->fdm, mtd);
- mtk_nfc_set_bad_mark_ctl(&chip->bad_mark, mtd);
-
- len = mtd->writesize + mtd->oobsize;
- nfc->buffer = devm_kzalloc(dev, len, GFP_KERNEL);
- if (!nfc->buffer)
- return -ENOMEM;
-
- ret = nand_scan_tail(mtd);
+ nand->controller->attach_chip = mtk_nfc_attach_chip;
+ ret = nand_scan(mtd, nsels);
if (ret)
return ret;

--
2.14.1
\
 
 \ /
  Last update: 2018-07-04 00:01    [W:0.148 / U:9.784 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site