lkml.org 
[lkml]   [2018]   [Jul]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [TRIVIAL RFC PATCH] Kconfigs - reduce use of "depends on EXPERT"
From
Date
(removing a bunch of cc's)

On Sun, 2018-07-29 at 13:42 +0200, Michael Büsch wrote:
> On Sat, 28 Jul 2018 15:13:00 -0700
> Joe Perches <joe@perches.com> wrote:
>
> > config SSB_SILENT
> > - bool "No SSB kernel messages"
> > - depends on SSB && EXPERT
> > + bool "No SSB kernel messages" if EXPERT
> > + depends on SSB
> > help
> > This option turns off all Sonics Silicon Backplane printks.
> > Note that you won't be able to identify problems, once
>
>
> What about removing this option entirely?
> We would just have to remove it from Kconfig and from its only use in
> drivers/ssb/ssb_private.h
> I don't think anybody uses (or should use) this option anyway.
> That would reduce the EXPERT dependencies by one, which is a good
> thing. :)

I'm fine with that, but it was originally your code from
the first ssb commit in 2007:

This might only be desired for production kernels on
embedded devices to reduce the kernel size.

Presumably for ddwrt and such.

Removal could simplify the ssb_<foo> printk logic a bit too.

Perhaps something like the below,
but your code, your decisions...:

---
drivers/ssb/Kconfig | 14 +---------
drivers/ssb/bridge_pcmcia_80211.c | 2 +-
drivers/ssb/driver_chipcommon.c | 2 +-
drivers/ssb/driver_chipcommon_pmu.c | 41 ++++++++++++++---------------
drivers/ssb/driver_mipscore.c | 26 +++++++++----------
drivers/ssb/driver_pcicore.c | 14 +++++-----
drivers/ssb/embedded.c | 4 +--
drivers/ssb/main.c | 49 +++++++++++++++++-----------------
drivers/ssb/pci.c | 52 ++++++++++++++++++-------------------
drivers/ssb/pcmcia.c | 44 ++++++++++++++-----------------
drivers/ssb/scan.c | 30 ++++++++++-----------
drivers/ssb/sprom.c | 4 +--
drivers/ssb/ssb_private.h | 25 ------------------
13 files changed, 130 insertions(+), 177 deletions(-)

diff --git a/drivers/ssb/Kconfig b/drivers/ssb/Kconfig
index c574dd210500..6c438c819eb9 100644
--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
@@ -89,21 +89,9 @@ config SSB_HOST_SOC

If unsure, say N

-config SSB_SILENT
- bool "No SSB kernel messages"
- depends on SSB && EXPERT
- help
- This option turns off all Sonics Silicon Backplane printks.
- Note that you won't be able to identify problems, once
- messages are turned off.
- This might only be desired for production kernels on
- embedded devices to reduce the kernel size.
-
- Say N
-
config SSB_DEBUG
bool "SSB debugging"
- depends on SSB && !SSB_SILENT
+ depends on SSB
help
This turns on additional runtime checks and debugging
messages. Turn this on for SSB troubleshooting.
diff --git a/drivers/ssb/bridge_pcmcia_80211.c b/drivers/ssb/bridge_pcmcia_80211.c
index d70568ea02d5..fb623bb01d3b 100644
--- a/drivers/ssb/bridge_pcmcia_80211.c
+++ b/drivers/ssb/bridge_pcmcia_80211.c
@@ -70,7 +70,7 @@ static int ssb_host_pcmcia_probe(struct pcmcia_device *dev)
err_kfree_ssb:
kfree(ssb);
out_error:
- ssb_err("Initialization failed (%d, %d)\n", res, err);
+ pr_err("Initialization failed (%d, %d)\n", res, err);
return err;
}

diff --git a/drivers/ssb/driver_chipcommon.c b/drivers/ssb/driver_chipcommon.c
index 7cb7d2c8fd86..6df0929b26eb 100644
--- a/drivers/ssb/driver_chipcommon.c
+++ b/drivers/ssb/driver_chipcommon.c
@@ -354,7 +354,7 @@ void ssb_chipcommon_init(struct ssb_chipcommon *cc)

if (cc->dev->id.revision >= 11)
cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
- ssb_dbg("chipcommon status is 0x%x\n", cc->status);
+ pr_debug("chipcommon status is 0x%x\n", cc->status);

if (cc->dev->id.revision >= 20) {
chipco_write32(cc, SSB_CHIPCO_GPIOPULLUP, 0);
diff --git a/drivers/ssb/driver_chipcommon_pmu.c b/drivers/ssb/driver_chipcommon_pmu.c
index c5352ea4821e..25e3b15070eb 100644
--- a/drivers/ssb/driver_chipcommon_pmu.c
+++ b/drivers/ssb/driver_chipcommon_pmu.c
@@ -110,8 +110,8 @@ static void ssb_pmu0_pllinit_r0(struct ssb_chipcommon *cc,
return;
}

- ssb_info("Programming PLL to %u.%03u MHz\n",
- crystalfreq / 1000, crystalfreq % 1000);
+ pr_info("Programming PLL to %u.%03u MHz\n",
+ crystalfreq / 1000, crystalfreq % 1000);

/* First turn the PLL off. */
switch (bus->chip_id) {
@@ -138,7 +138,7 @@ static void ssb_pmu0_pllinit_r0(struct ssb_chipcommon *cc,
}
tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
- ssb_emerg("Failed to turn the PLL off!\n");
+ pr_emerg("Failed to turn the PLL off!\n");

/* Set PDIV in PLL control 0. */
pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL0);
@@ -249,8 +249,8 @@ static void ssb_pmu1_pllinit_r0(struct ssb_chipcommon *cc,
return;
}

- ssb_info("Programming PLL to %u.%03u MHz\n",
- crystalfreq / 1000, crystalfreq % 1000);
+ pr_info("Programming PLL to %u.%03u MHz\n",
+ crystalfreq / 1000, crystalfreq % 1000);

/* First turn the PLL off. */
switch (bus->chip_id) {
@@ -275,7 +275,7 @@ static void ssb_pmu1_pllinit_r0(struct ssb_chipcommon *cc,
}
tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
- ssb_emerg("Failed to turn the PLL off!\n");
+ pr_emerg("Failed to turn the PLL off!\n");

/* Set p1div and p2div. */
pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL0);
@@ -349,8 +349,8 @@ static void ssb_pmu_pll_init(struct ssb_chipcommon *cc)
case 43222:
break;
default:
- ssb_err("ERROR: PLL init unknown for device %04X\n",
- bus->chip_id);
+ pr_err("ERROR: PLL init unknown for device %04X\n",
+ bus->chip_id);
}
}

@@ -471,8 +471,8 @@ static void ssb_pmu_resources_init(struct ssb_chipcommon *cc)
max_msk = 0xFFFFF;
break;
default:
- ssb_err("ERROR: PMU resource config unknown for device %04X\n",
- bus->chip_id);
+ pr_err("ERROR: PMU resource config unknown for device %04X\n",
+ bus->chip_id);
}

if (updown_tab) {
@@ -524,8 +524,8 @@ void ssb_pmu_init(struct ssb_chipcommon *cc)
pmucap = chipco_read32(cc, SSB_CHIPCO_PMU_CAP);
cc->pmu.rev = (pmucap & SSB_CHIPCO_PMU_CAP_REVISION);

- ssb_dbg("Found rev %u PMU (capabilities 0x%08X)\n",
- cc->pmu.rev, pmucap);
+ pr_debug("Found rev %u PMU (capabilities 0x%08X)\n",
+ cc->pmu.rev, pmucap);

if (cc->pmu.rev == 1)
chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
@@ -636,8 +636,8 @@ u32 ssb_pmu_get_alp_clock(struct ssb_chipcommon *cc)
case 0x5354:
return ssb_pmu_get_alp_clock_clk0(cc);
default:
- ssb_err("ERROR: PMU alp clock unknown for device %04X\n",
- bus->chip_id);
+ pr_err("ERROR: PMU alp clock unknown for device %04X\n",
+ bus->chip_id);
return 0;
}
}
@@ -651,8 +651,8 @@ u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc)
/* 5354 chip uses a non programmable PLL of frequency 240MHz */
return 240000000;
default:
- ssb_err("ERROR: PMU cpu clock unknown for device %04X\n",
- bus->chip_id);
+ pr_err("ERROR: PMU cpu clock unknown for device %04X\n",
+ bus->chip_id);
return 0;
}
}
@@ -665,8 +665,8 @@ u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc)
case 0x5354:
return 120000000;
default:
- ssb_err("ERROR: PMU controlclock unknown for device %04X\n",
- bus->chip_id);
+ pr_err("ERROR: PMU controlclock unknown for device %04X\n",
+ bus->chip_id);
return 0;
}
}
@@ -705,9 +705,8 @@ void ssb_pmu_spuravoid_pllupdate(struct ssb_chipcommon *cc, int spuravoid)
pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD;
break;
default:
- ssb_printk(KERN_ERR PFX
- "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
- cc->dev->bus->chip_id);
+ pr_err("Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
+ cc->dev->bus->chip_id);
return;
}

diff --git a/drivers/ssb/driver_mipscore.c b/drivers/ssb/driver_mipscore.c
index f87efef42252..ff06fab6a44d 100644
--- a/drivers/ssb/driver_mipscore.c
+++ b/drivers/ssb/driver_mipscore.c
@@ -170,22 +170,22 @@ static void set_irq(struct ssb_device *dev, unsigned int irq)
irqflag |= (ipsflag & ~ipsflag_irq_mask[irq]);
ssb_write32(mdev, SSB_IPSFLAG, irqflag);
}
- ssb_dbg("set_irq: core 0x%04x, irq %d => %d\n",
- dev->id.coreid, oldirq+2, irq+2);
+ pr_debug("set_irq: core 0x%04x, irq %d => %d\n",
+ dev->id.coreid, oldirq+2, irq+2);
}

static void print_irq(struct ssb_device *dev, unsigned int irq)
{
static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"};
- ssb_dbg("core 0x%04x, irq : %s%s %s%s %s%s %s%s %s%s %s%s %s%s\n",
- dev->id.coreid,
- irq_name[0], irq == 0 ? "*" : " ",
- irq_name[1], irq == 1 ? "*" : " ",
- irq_name[2], irq == 2 ? "*" : " ",
- irq_name[3], irq == 3 ? "*" : " ",
- irq_name[4], irq == 4 ? "*" : " ",
- irq_name[5], irq == 5 ? "*" : " ",
- irq_name[6], irq == 6 ? "*" : " ");
+ pr_debug("core 0x%04x, irq : %s%s %s%s %s%s %s%s %s%s %s%s %s%s\n",
+ dev->id.coreid,
+ irq_name[0], irq == 0 ? "*" : " ",
+ irq_name[1], irq == 1 ? "*" : " ",
+ irq_name[2], irq == 2 ? "*" : " ",
+ irq_name[3], irq == 3 ? "*" : " ",
+ irq_name[4], irq == 4 ? "*" : " ",
+ irq_name[5], irq == 5 ? "*" : " ",
+ irq_name[6], irq == 6 ? "*" : " ");
}

static void dump_irq(struct ssb_bus *bus)
@@ -299,7 +299,7 @@ void ssb_mipscore_init(struct ssb_mipscore *mcore)
if (!mcore->dev)
return; /* We don't have a MIPS core */

- ssb_dbg("Initializing MIPS core...\n");
+ pr_debug("Initializing MIPS core...\n");

bus = mcore->dev->bus;
hz = ssb_clockspeed(bus);
@@ -347,7 +347,7 @@ void ssb_mipscore_init(struct ssb_mipscore *mcore)
break;
}
}
- ssb_dbg("after irq reconfiguration\n");
+ pr_debug("after irq reconfiguration\n");
dump_irq(bus);

ssb_mips_serial_init(mcore);
diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c
index 5fe1c22e289b..911c6d4aec32 100644
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -263,7 +263,7 @@ int ssb_pcicore_plat_dev_init(struct pci_dev *d)
return -ENODEV;
}

- ssb_info("PCI: Fixing up device %s\n", pci_name(d));
+ pr_info("PCI: Fixing up device %s\n", pci_name(d));

/* Fix up interrupt lines */
d->irq = ssb_mips_irq(extpci_core->dev) + 2;
@@ -284,12 +284,12 @@ static void ssb_pcicore_fixup_pcibridge(struct pci_dev *dev)
if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0)
return;

- ssb_info("PCI: Fixing up bridge %s\n", pci_name(dev));
+ pr_info("PCI: Fixing up bridge %s\n", pci_name(dev));

/* Enable PCI bridge bus mastering and memory space */
pci_set_master(dev);
if (pcibios_enable_device(dev, ~0) < 0) {
- ssb_err("PCI: SSB bridge enable failed\n");
+ pr_err("PCI: SSB bridge enable failed\n");
return;
}

@@ -298,8 +298,8 @@ static void ssb_pcicore_fixup_pcibridge(struct pci_dev *dev)

/* Make sure our latency is high enough to handle the devices behind us */
lat = 168;
- ssb_info("PCI: Fixing latency timer of device %s to %u\n",
- pci_name(dev), lat);
+ pr_info("PCI: Fixing latency timer of device %s to %u\n",
+ pci_name(dev), lat);
pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
}
DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_pcicore_fixup_pcibridge);
@@ -322,7 +322,7 @@ static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc)
return;
extpci_core = pc;

- ssb_dbg("PCIcore in host mode found\n");
+ pr_debug("PCIcore in host mode found\n");
/* Reset devices on the external PCI bus */
val = SSB_PCICORE_CTL_RST_OE;
val |= SSB_PCICORE_CTL_CLK_OE;
@@ -337,7 +337,7 @@ static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc)
udelay(1); /* Assertion time demanded by the PCI standard */

if (pc->dev->bus->has_cardbus_slot) {
- ssb_dbg("CardBus slot detected\n");
+ pr_debug("CardBus slot detected\n");
pc->cardbusmode = 1;
/* GPIO 1 resets the bridge */
ssb_gpio_out(pc->dev->bus, 1, 1);
diff --git a/drivers/ssb/embedded.c b/drivers/ssb/embedded.c
index 55e101115038..3f311b399b69 100644
--- a/drivers/ssb/embedded.c
+++ b/drivers/ssb/embedded.c
@@ -57,8 +57,8 @@ int ssb_watchdog_register(struct ssb_bus *bus)
bus->busnumber, &wdt,
sizeof(wdt));
if (IS_ERR(pdev)) {
- ssb_dbg("can not register watchdog device, err: %li\n",
- PTR_ERR(pdev));
+ pr_debug("can not register watchdog device, err: %li\n",
+ PTR_ERR(pdev));
return PTR_ERR(pdev);
}

diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c
index 116594413f66..5d841332d413 100644
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -256,8 +256,8 @@ int ssb_devices_thaw(struct ssb_freeze_context *ctx)

err = sdrv->probe(sdev, &sdev->id);
if (err) {
- ssb_err("Failed to thaw device %s\n",
- dev_name(sdev->dev));
+ pr_err("Failed to thaw device %s\n",
+ dev_name(sdev->dev));
result = err;
}
ssb_device_put(sdev);
@@ -431,9 +431,9 @@ void ssb_bus_unregister(struct ssb_bus *bus)

err = ssb_gpio_unregister(bus);
if (err == -EBUSY)
- ssb_dbg("Some GPIOs are still in use\n");
+ pr_debug("Some GPIOs are still in use\n");
else if (err)
- ssb_dbg("Can not unregister GPIO driver: %i\n", err);
+ pr_debug("Can not unregister GPIO driver: %i\n", err);

ssb_buses_lock();
ssb_devices_unregister(bus);
@@ -518,7 +518,7 @@ static int ssb_devices_register(struct ssb_bus *bus)
sdev->dev = dev;
err = device_register(dev);
if (err) {
- ssb_err("Could not register %s\n", dev_name(dev));
+ pr_err("Could not register %s\n", dev_name(dev));
/* Set dev to NULL to not unregister
* dev on error unwinding. */
sdev->dev = NULL;
@@ -576,9 +576,9 @@ static int ssb_attach_queued_buses(void)

err = ssb_gpio_init(bus);
if (err == -ENOTSUPP)
- ssb_dbg("GPIO driver not activated\n");
+ pr_debug("GPIO driver not activated\n");
else if (err)
- ssb_dbg("Error registering GPIO driver: %i\n", err);
+ pr_debug("Error registering GPIO driver: %i\n", err);

ssb_bus_may_powerdown(bus);

@@ -707,11 +707,11 @@ int ssb_bus_pcibus_register(struct ssb_bus *bus, struct pci_dev *host_pci)

err = ssb_bus_register(bus, ssb_pci_get_invariants, 0);
if (!err) {
- ssb_info("Sonics Silicon Backplane found on PCI device %s\n",
- dev_name(&host_pci->dev));
+ pr_info("Sonics Silicon Backplane found on PCI device %s\n",
+ dev_name(&host_pci->dev));
} else {
- ssb_err("Failed to register PCI version of SSB with error %d\n",
- err);
+ pr_err("Failed to register PCI version of SSB with error %d\n",
+ err);
}

return err;
@@ -731,8 +731,8 @@ int ssb_bus_pcmciabus_register(struct ssb_bus *bus,

err = ssb_bus_register(bus, ssb_pcmcia_get_invariants, baseaddr);
if (!err) {
- ssb_info("Sonics Silicon Backplane found on PCMCIA device %s\n",
- pcmcia_dev->devname);
+ pr_info("Sonics Silicon Backplane found on PCMCIA device %s\n",
+ pcmcia_dev->devname);
}

return err;
@@ -752,8 +752,8 @@ int ssb_bus_sdiobus_register(struct ssb_bus *bus, struct sdio_func *func,

err = ssb_bus_register(bus, ssb_sdio_get_invariants, ~0);
if (!err) {
- ssb_info("Sonics Silicon Backplane found on SDIO device %s\n",
- sdio_func_id(func));
+ pr_info("Sonics Silicon Backplane found on SDIO device %s\n",
+ sdio_func_id(func));
}

return err;
@@ -771,8 +771,8 @@ int ssb_bus_host_soc_register(struct ssb_bus *bus, unsigned long baseaddr)

err = ssb_bus_register(bus, ssb_host_soc_get_invariants, baseaddr);
if (!err) {
- ssb_info("Sonics Silicon Backplane found at address 0x%08lX\n",
- baseaddr);
+ pr_info("Sonics Silicon Backplane found at address 0x%08lX\n",
+ baseaddr);
}

return err;
@@ -1057,9 +1057,8 @@ static int ssb_wait_bits(struct ssb_device *dev, u16 reg, u32 bitmask,
}
udelay(10);
}
- printk(KERN_ERR PFX "Timeout waiting for bitmask %08X on "
- "register %04X to %s.\n",
- bitmask, reg, (set ? "set" : "clear"));
+ pr_err("Timeout waiting for bitmask %08X on register %04X to %s\n",
+ bitmask, reg, set ? "set" : "clear");

return -ETIMEDOUT;
}
@@ -1169,7 +1168,7 @@ int ssb_bus_may_powerdown(struct ssb_bus *bus)
#endif
return err;
error:
- ssb_err("Bus powerdown failed\n");
+ pr_err("Bus powerdown failed\n");
goto out;
}
EXPORT_SYMBOL(ssb_bus_may_powerdown);
@@ -1192,7 +1191,7 @@ int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl)

return 0;
error:
- ssb_err("Bus powerup failed\n");
+ pr_err("Bus powerup failed\n");
return err;
}
EXPORT_SYMBOL(ssb_bus_powerup);
@@ -1300,19 +1299,19 @@ static int __init ssb_modinit(void)

err = b43_pci_ssb_bridge_init();
if (err) {
- ssb_err("Broadcom 43xx PCI-SSB-bridge initialization failed\n");
+ pr_err("Broadcom 43xx PCI-SSB-bridge initialization failed\n");
/* don't fail SSB init because of this */
err = 0;
}
err = ssb_host_pcmcia_init();
if (err) {
- ssb_err("PCMCIA host initialization failed\n");
+ pr_err("PCMCIA host initialization failed\n");
/* don't fail SSB init because of this */
err = 0;
}
err = ssb_gige_init();
if (err) {
- ssb_err("SSB Broadcom Gigabit Ethernet driver initialization failed\n");
+ pr_err("SSB Broadcom Gigabit Ethernet driver initialization failed\n");
/* don't fail SSB init because of this */
err = 0;
}
diff --git a/drivers/ssb/pci.c b/drivers/ssb/pci.c
index 77b551da5728..04d424e10077 100644
--- a/drivers/ssb/pci.c
+++ b/drivers/ssb/pci.c
@@ -56,7 +56,7 @@ int ssb_pci_switch_coreidx(struct ssb_bus *bus, u8 coreidx)
}
return 0;
error:
- ssb_err("Failed to switch to core %u\n", coreidx);
+ pr_err("Failed to switch to core %u\n", coreidx);
return -ENODEV;
}

@@ -67,9 +67,8 @@ int ssb_pci_switch_core(struct ssb_bus *bus,
unsigned long flags;

#if SSB_VERBOSE_PCICORESWITCH_DEBUG
- ssb_info("Switching to %s core, index %d\n",
- ssb_core_name(dev->id.coreid),
- dev->core_index);
+ pr_info("Switching to %s core, index %d\n",
+ ssb_core_name(dev->id.coreid), dev->core_index);
#endif

spin_lock_irqsave(&bus->bar_lock, flags);
@@ -161,7 +160,7 @@ int ssb_pci_xtal(struct ssb_bus *bus, u32 what, int turn_on)
return err;

err_pci:
- printk(KERN_ERR PFX "Error: ssb_pci_xtal() could not access PCI config space!\n");
+ pr_err("Error: ssb_pci_xtal() could not access PCI config space!\n");
err = -EBUSY;
goto out;
}
@@ -286,7 +285,7 @@ static int sprom_do_write(struct ssb_bus *bus, const u16 *sprom)
u32 spromctl;
u16 size = bus->sprom_size;

- ssb_notice("Writing SPROM. Do NOT turn off the power! Please stand by...\n");
+ pr_notice("Writing SPROM. Do NOT turn off the power! Please stand by...\n");
err = pci_read_config_dword(pdev, SSB_SPROMCTL, &spromctl);
if (err)
goto err_ctlreg;
@@ -294,17 +293,17 @@ static int sprom_do_write(struct ssb_bus *bus, const u16 *sprom)
err = pci_write_config_dword(pdev, SSB_SPROMCTL, spromctl);
if (err)
goto err_ctlreg;
- ssb_notice("[ 0%%");
+ pr_notice("[ 0%%");
msleep(500);
for (i = 0; i < size; i++) {
if (i == size / 4)
- ssb_cont("25%%");
+ pr_cont("25%%");
else if (i == size / 2)
- ssb_cont("50%%");
+ pr_cont("50%%");
else if (i == (size * 3) / 4)
- ssb_cont("75%%");
+ pr_cont("75%%");
else if (i % 2)
- ssb_cont(".");
+ pr_cont(".");
writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2));
mmiowb();
msleep(20);
@@ -317,12 +316,12 @@ static int sprom_do_write(struct ssb_bus *bus, const u16 *sprom)
if (err)
goto err_ctlreg;
msleep(500);
- ssb_cont("100%% ]\n");
- ssb_notice("SPROM written\n");
+ pr_cont("100%% ]\n");
+ pr_notice("SPROM written\n");

return 0;
err_ctlreg:
- ssb_err("Could not access SPROM control register.\n");
+ pr_err("Could not access SPROM control register.\n");
return err;
}

@@ -816,7 +815,7 @@ static int sprom_extract(struct ssb_bus *bus, struct ssb_sprom *out,
memset(out, 0, sizeof(*out));

out->revision = in[size - 1] & 0x00FF;
- ssb_dbg("SPROM revision %d detected\n", out->revision);
+ pr_debug("SPROM revision %d detected\n", out->revision);
memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */
memset(out->et1mac, 0xFF, 6);

@@ -825,7 +824,7 @@ static int sprom_extract(struct ssb_bus *bus, struct ssb_sprom *out,
* number stored in the SPROM.
* Always extract r1. */
out->revision = 1;
- ssb_dbg("SPROM treated as revision %d\n", out->revision);
+ pr_debug("SPROM treated as revision %d\n", out->revision);
}

switch (out->revision) {
@@ -842,8 +841,8 @@ static int sprom_extract(struct ssb_bus *bus, struct ssb_sprom *out,
sprom_extract_r8(out, in);
break;
default:
- ssb_warn("Unsupported SPROM revision %d detected. Will extract v1\n",
- out->revision);
+ pr_warn("Unsupported SPROM revision %d detected. Will extract v1\n",
+ out->revision);
out->revision = 1;
sprom_extract_r123(out, in);
}
@@ -863,7 +862,7 @@ static int ssb_pci_sprom_get(struct ssb_bus *bus,
u16 *buf;

if (!ssb_is_sprom_available(bus)) {
- ssb_err("No SPROM available!\n");
+ pr_err("No SPROM available!\n");
return -ENODEV;
}
if (bus->chipco.dev) { /* can be unavailable! */
@@ -882,7 +881,7 @@ static int ssb_pci_sprom_get(struct ssb_bus *bus,
} else {
bus->sprom_offset = SSB_SPROM_BASE1;
}
- ssb_dbg("SPROM offset is 0x%x\n", bus->sprom_offset);
+ pr_debug("SPROM offset is 0x%x\n", bus->sprom_offset);

buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
if (!buf)
@@ -907,16 +906,16 @@ static int ssb_pci_sprom_get(struct ssb_bus *bus,
* available for this device in some other storage */
err = ssb_fill_sprom_with_fallback(bus, sprom);
if (err) {
- ssb_warn("WARNING: Using fallback SPROM failed (err %d)\n",
- err);
+ pr_warn("WARNING: Using fallback SPROM failed (err %d)\n",
+ err);
goto out_free;
} else {
- ssb_dbg("Using SPROM revision %d provided by platform\n",
- sprom->revision);
+ pr_debug("Using SPROM revision %d provided by platform\n",
+ sprom->revision);
err = 0;
goto out_free;
}
- ssb_warn("WARNING: Invalid SPROM CRC (corrupt SPROM)\n");
+ pr_warn("WARNING: Invalid SPROM CRC (corrupt SPROM)\n");
}
}
err = sprom_extract(bus, sprom, buf, bus->sprom_size);
@@ -953,8 +952,7 @@ static int ssb_pci_assert_buspower(struct ssb_bus *bus)
if (likely(bus->powered_up))
return 0;

- printk(KERN_ERR PFX "FATAL ERROR: Bus powered down "
- "while accessing PCI MMIO space\n");
+ pr_err("FATAL ERROR: Bus powered down while accessing PCI MMIO space\n");
if (bus->power_warn_count <= 10) {
bus->power_warn_count++;
dump_stack();
diff --git a/drivers/ssb/pcmcia.c b/drivers/ssb/pcmcia.c
index f03422bbf087..50a8355f3e3d 100644
--- a/drivers/ssb/pcmcia.c
+++ b/drivers/ssb/pcmcia.c
@@ -143,7 +143,7 @@ int ssb_pcmcia_switch_coreidx(struct ssb_bus *bus,

return 0;
error:
- ssb_err("Failed to switch to core %u\n", coreidx);
+ pr_err("Failed to switch to core %u\n", coreidx);
return err;
}

@@ -152,9 +152,8 @@ static int ssb_pcmcia_switch_core(struct ssb_bus *bus, struct ssb_device *dev)
int err;

#if SSB_VERBOSE_PCMCIACORESWITCH_DEBUG
- ssb_info("Switching to %s core, index %d\n",
- ssb_core_name(dev->id.coreid),
- dev->core_index);
+ pr_info("Switching to %s core, index %d\n",
+ ssb_core_name(dev->id.coreid), dev->core_index);
#endif

err = ssb_pcmcia_switch_coreidx(bus, dev->core_index);
@@ -190,7 +189,7 @@ int ssb_pcmcia_switch_segment(struct ssb_bus *bus, u8 seg)

return 0;
error:
- ssb_err("Failed to switch pcmcia segment\n");
+ pr_err("Failed to switch pcmcia segment\n");
return err;
}

@@ -547,39 +546,39 @@ static int ssb_pcmcia_sprom_write_all(struct ssb_bus *bus, const u16 *sprom)
bool failed = 0;
size_t size = SSB_PCMCIA_SPROM_SIZE;

- ssb_notice("Writing SPROM. Do NOT turn off the power! Please stand by...\n");
+ pr_notice("Writing SPROM. Do NOT turn off the power! Please stand by...\n");
err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEEN);
if (err) {
- ssb_notice("Could not enable SPROM write access\n");
+ pr_notice("Could not enable SPROM write access\n");
return -EBUSY;
}
- ssb_notice("[ 0%%");
+ pr_notice("[ 0%%");
msleep(500);
for (i = 0; i < size; i++) {
if (i == size / 4)
- ssb_cont("25%%");
+ pr_cont("25%%");
else if (i == size / 2)
- ssb_cont("50%%");
+ pr_cont("50%%");
else if (i == (size * 3) / 4)
- ssb_cont("75%%");
+ pr_cont("75%%");
else if (i % 2)
- ssb_cont(".");
+ pr_cont(".");
err = ssb_pcmcia_sprom_write(bus, i, sprom[i]);
if (err) {
- ssb_notice("Failed to write to SPROM\n");
+ pr_notice("Failed to write to SPROM\n");
failed = 1;
break;
}
}
err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEDIS);
if (err) {
- ssb_notice("Could not disable SPROM write access\n");
+ pr_notice("Could not disable SPROM write access\n");
failed = 1;
}
msleep(500);
if (!failed) {
- ssb_cont("100%% ]\n");
- ssb_notice("SPROM written\n");
+ pr_cont("100%% ]\n");
+ pr_notice("SPROM written\n");
}

return failed ? -EBUSY : 0;
@@ -693,9 +692,8 @@ static int ssb_pcmcia_do_get_invariants(struct pcmcia_device *p_dev,
return -ENOSPC; /* continue with next entry */

error:
- ssb_err(
- "PCMCIA: Failed to fetch device invariants: %s\n",
- error_description);
+ pr_err("PCMCIA: Failed to fetch device invariants: %s\n",
+ error_description);
return -ENODEV;
}

@@ -715,8 +713,7 @@ int ssb_pcmcia_get_invariants(struct ssb_bus *bus,
res = pcmcia_loop_tuple(bus->host_pcmcia, CISTPL_FUNCE,
ssb_pcmcia_get_mac, sprom);
if (res != 0) {
- ssb_err(
- "PCMCIA: Failed to fetch MAC address\n");
+ pr_err("PCMCIA: Failed to fetch MAC address\n");
return -ENODEV;
}

@@ -726,8 +723,7 @@ int ssb_pcmcia_get_invariants(struct ssb_bus *bus,
if ((res == 0) || (res == -ENOSPC))
return 0;

- ssb_err(
- "PCMCIA: Failed to fetch device invariants\n");
+ pr_err("PCMCIA: Failed to fetch device invariants\n");
return -ENODEV;
}

@@ -836,6 +832,6 @@ int ssb_pcmcia_init(struct ssb_bus *bus)

return 0;
error:
- ssb_err("Failed to initialize PCMCIA host device\n");
+ pr_err("Failed to initialize PCMCIA host device\n");
return err;
}
diff --git a/drivers/ssb/scan.c b/drivers/ssb/scan.c
index b9429df583eb..56caa189d966 100644
--- a/drivers/ssb/scan.c
+++ b/drivers/ssb/scan.c
@@ -125,7 +125,7 @@ static u16 pcidev_to_chipid(struct pci_dev *pci_dev)
chipid_fallback = 0x4401;
break;
default:
- ssb_err("PCI-ID not in fallback list\n");
+ pr_err("PCI-ID not in fallback list\n");
}

return chipid_fallback;
@@ -151,7 +151,7 @@ static u8 chipid_to_nrcores(u16 chipid)
case 0x4704:
return 9;
default:
- ssb_err("CHIPID not in nrcores fallback list\n");
+ pr_err("CHIPID not in nrcores fallback list\n");
}

return 1;
@@ -318,13 +318,13 @@ int ssb_bus_scan(struct ssb_bus *bus,
bus->chip_package = 0;
}
}
- ssb_info("Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n",
- bus->chip_id, bus->chip_rev, bus->chip_package);
+ pr_info("Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n",
+ bus->chip_id, bus->chip_rev, bus->chip_package);
if (!bus->nr_devices)
bus->nr_devices = chipid_to_nrcores(bus->chip_id);
if (bus->nr_devices > ARRAY_SIZE(bus->devices)) {
- ssb_err("More than %d ssb cores found (%d)\n",
- SSB_MAX_NR_CORES, bus->nr_devices);
+ pr_err("More than %d ssb cores found (%d)\n",
+ SSB_MAX_NR_CORES, bus->nr_devices);
goto err_unmap;
}
if (bus->bustype == SSB_BUSTYPE_SSB) {
@@ -355,18 +355,16 @@ int ssb_bus_scan(struct ssb_bus *bus,
dev->bus = bus;
dev->ops = bus->ops;

- printk(KERN_DEBUG PFX
- "Core %d found: %s "
- "(cc 0x%03X, rev 0x%02X, vendor 0x%04X)\n",
- i, ssb_core_name(dev->id.coreid),
- dev->id.coreid, dev->id.revision, dev->id.vendor);
+ pr_debug("Core %d found: %s (cc 0x%03X, rev 0x%02X, vendor 0x%04X)\n",
+ i, ssb_core_name(dev->id.coreid),
+ dev->id.coreid, dev->id.revision, dev->id.vendor);

switch (dev->id.coreid) {
case SSB_DEV_80211:
nr_80211_cores++;
if (nr_80211_cores > 1) {
if (!we_support_multiple_80211_cores(bus)) {
- ssb_dbg("Ignoring additional 802.11 core\n");
+ pr_debug("Ignoring additional 802.11 core\n");
continue;
}
}
@@ -374,7 +372,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
case SSB_DEV_EXTIF:
#ifdef CONFIG_SSB_DRIVER_EXTIF
if (bus->extif.dev) {
- ssb_warn("WARNING: Multiple EXTIFs found\n");
+ pr_warn("WARNING: Multiple EXTIFs found\n");
break;
}
bus->extif.dev = dev;
@@ -382,7 +380,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
break;
case SSB_DEV_CHIPCOMMON:
if (bus->chipco.dev) {
- ssb_warn("WARNING: Multiple ChipCommon found\n");
+ pr_warn("WARNING: Multiple ChipCommon found\n");
break;
}
bus->chipco.dev = dev;
@@ -391,7 +389,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
case SSB_DEV_MIPS_3302:
#ifdef CONFIG_SSB_DRIVER_MIPS
if (bus->mipscore.dev) {
- ssb_warn("WARNING: Multiple MIPS cores found\n");
+ pr_warn("WARNING: Multiple MIPS cores found\n");
break;
}
bus->mipscore.dev = dev;
@@ -412,7 +410,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
}
}
if (bus->pcicore.dev) {
- ssb_warn("WARNING: Multiple PCI(E) cores found\n");
+ pr_warn("WARNING: Multiple PCI(E) cores found\n");
break;
}
bus->pcicore.dev = dev;
diff --git a/drivers/ssb/sprom.c b/drivers/ssb/sprom.c
index e753fbe302a7..4f028a80d6c4 100644
--- a/drivers/ssb/sprom.c
+++ b/drivers/ssb/sprom.c
@@ -127,13 +127,13 @@ ssize_t ssb_attr_sprom_store(struct ssb_bus *bus,
goto out_kfree;
err = ssb_devices_freeze(bus, &freeze);
if (err) {
- ssb_err("SPROM write: Could not freeze all devices\n");
+ pr_err("SPROM write: Could not freeze all devices\n");
goto out_unlock;
}
res = sprom_write(bus, sprom);
err = ssb_devices_thaw(&freeze);
if (err)
- ssb_err("SPROM write: Could not thaw all devices\n");
+ pr_err("SPROM write: Could not thaw all devices\n");
out_unlock:
mutex_unlock(&bus->sprom_mutex);
out_kfree:
diff --git a/drivers/ssb/ssb_private.h b/drivers/ssb/ssb_private.h
index ef9ac8efcab4..b184fa38dfd7 100644
--- a/drivers/ssb/ssb_private.h
+++ b/drivers/ssb/ssb_private.h
@@ -6,33 +6,8 @@
#include <linux/types.h>
#include <linux/bcm47xx_wdt.h>

-
#define PFX "ssb: "

-#ifdef CONFIG_SSB_SILENT
-# define ssb_printk(fmt, ...) \
- do { if (0) printk(fmt, ##__VA_ARGS__); } while (0)
-#else
-# define ssb_printk(fmt, ...) \
- printk(fmt, ##__VA_ARGS__)
-#endif /* CONFIG_SSB_SILENT */
-
-#define ssb_emerg(fmt, ...) ssb_printk(KERN_EMERG PFX fmt, ##__VA_ARGS__)
-#define ssb_err(fmt, ...) ssb_printk(KERN_ERR PFX fmt, ##__VA_ARGS__)
-#define ssb_warn(fmt, ...) ssb_printk(KERN_WARNING PFX fmt, ##__VA_ARGS__)
-#define ssb_notice(fmt, ...) ssb_printk(KERN_NOTICE PFX fmt, ##__VA_ARGS__)
-#define ssb_info(fmt, ...) ssb_printk(KERN_INFO PFX fmt, ##__VA_ARGS__)
-#define ssb_cont(fmt, ...) ssb_printk(KERN_CONT fmt, ##__VA_ARGS__)
-
-/* dprintk: Debugging printk; vanishes for non-debug compilation */
-#ifdef CONFIG_SSB_DEBUG
-# define ssb_dbg(fmt, ...) \
- ssb_printk(KERN_DEBUG PFX fmt, ##__VA_ARGS__)
-#else
-# define ssb_dbg(fmt, ...) \
- do { if (0) printk(KERN_DEBUG PFX fmt, ##__VA_ARGS__); } while (0)
-#endif
-
#ifdef CONFIG_SSB_DEBUG
# define SSB_WARN_ON(x) WARN_ON(x)
# define SSB_BUG_ON(x) BUG_ON(x)
\
 
 \ /
  Last update: 2018-07-29 20:17    [W:0.061 / U:5.640 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site