lkml.org 
[lkml]   [2018]   [Jul]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH 7/7] arm64: dts: tegra210-p2597: Remove no-1-8-v from sdmmc1
From
Date
Looks like patch 6 will probably cause tegra-sdhci to start advertising 
faster modes (see " if (!IS_ERR(host->mmc->supply.vqmmc))" in
sdhci-tegra.c). With that patch and this, will the SDHCI core start to
try putting us into these higher modes? Clearly that won't work yet
before the upcoming patches.

Mikko

On 20.07.2018 15:45, Aapo Vienamo wrote:
> Allow sdmmc1 to set the signaling voltage to 1.8 V in order to support
> faster signaling modes.
>
> Signed-off-by: Aapo Vienamo <avienamo@nvidia.com>
> ---
> arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
> index 9d5a0e6..365726d 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
> +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
> @@ -1452,7 +1452,6 @@
> sdhci@700b0000 {
> status = "okay";
> bus-width = <4>;
> - no-1-8-v;
>
> cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>;
>
>

\
 
 \ /
  Last update: 2018-07-25 08:58    [W:0.126 / U:0.764 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site