[lkml]   [2018]   [Jul]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v3 0/3] PCI: NVMe reset quirks
v3: Separate quirks, only for the afflicted devices

v2: Add bug link, use Samsung vendor ID, add spec references

Fix two different NVMe device reset issues with device specific
quirks. The Samsung controller in patch 2 sometimes doesn't like
being reset while enabled, so disable the NVMe controller prior to
FLR. This quirk is generic to all NVMe class devices, though I've
dropped the additional delay some devices require between disabling
and checking ready status. This can be added later should any of
those devices need this quirk. The Intel controller quirk is now
just a simple delay after FLR, which clearly any device needing
similar behavior can also use. Thanks,



Alex Williamson (3):
PCI: Export pcie_has_flr()
PCI: Samsung SM961/PM961 NVMe disable before FLR quirk
PCI: Intel DC P3700 NVMe delay after FLR quirk

drivers/pci/pci.c | 3 +
drivers/pci/quirks.c | 105 ++++++++++++++++++++++++++++++++++++++++++++++++++
include/linux/pci.h | 1
3 files changed, 108 insertions(+), 1 deletion(-)

 \ /
  Last update: 2018-07-24 18:14    [W:0.060 / U:2.860 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site