lkml.org 
[lkml]   [2018]   [Jul]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/1] dmaengine: mv_xor_v2: use {lower,upper}_32_bits to configure HW descriptor address
Date
From: Hanna Hawa <hannah@marvell.com>

>> drivers/dma/mv_xor_v2.c:647:36: sparse: constant 0xFFFF00000000 is so big it is long
include/linux/device.h:678:13: sparse: undefined identifier '__builtin_mul_overflow'
include/linux/device.h:678:13: sparse: call with no type!

Use lower_32_bits and upper_32_bits to set the hw_desq address, instead of
using constant.

Signed-off-by: Hanna Hawa <hannah@marvell.com>
---
drivers/dma/mv_xor_v2.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/mv_xor_v2.c b/drivers/dma/mv_xor_v2.c
index d41d916..8dc0aa4 100644
--- a/drivers/dma/mv_xor_v2.c
+++ b/drivers/dma/mv_xor_v2.c
@@ -642,9 +642,9 @@ static int mv_xor_v2_descq_init(struct mv_xor_v2_device *xor_dev)
xor_dev->dma_base + MV_XOR_V2_DMA_DESQ_SIZE_OFF);

/* write the DESQ address to the DMA enngine*/
- writel(xor_dev->hw_desq & 0xFFFFFFFF,
+ writel(lower_32_bits(xor_dev->hw_desq),
xor_dev->dma_base + MV_XOR_V2_DMA_DESQ_BALR_OFF);
- writel((xor_dev->hw_desq & 0xFFFF00000000) >> 32,
+ writel(upper_32_bits(xor_dev->hw_desq),
xor_dev->dma_base + MV_XOR_V2_DMA_DESQ_BAHR_OFF);

/*
--
1.9.1
\
 
 \ /
  Last update: 2018-07-24 15:45    [W:0.053 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site