lkml.org 
[lkml]   [2018]   [Jul]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/4] ARC: DTS: mark DMA devices connected through IOC port as dma-coherent
Date
Mark DMA devices on AXS103 and HSDK boards connected through IOC
port as dma-coherent.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
---
arch/arc/boot/dts/axc003.dtsi | 26 ++++++++++++++++++++++++++
arch/arc/boot/dts/axc003_idu.dtsi | 26 ++++++++++++++++++++++++++
arch/arc/boot/dts/hsdk.dts | 4 ++++
3 files changed, 56 insertions(+)

diff --git a/arch/arc/boot/dts/axc003.dtsi b/arch/arc/boot/dts/axc003.dtsi
index dc91c663bcc0..d75d65ddf8e3 100644
--- a/arch/arc/boot/dts/axc003.dtsi
+++ b/arch/arc/boot/dts/axc003.dtsi
@@ -93,6 +93,32 @@
};
};

+ /*
+ * Mark DMA peripherals connected via IOC port as dma-coherent. We do
+ * it via overlay because peripherals defined in axs10x_mb.dtsi are
+ * used for both AXS101 and AXS103 boards and only AXS103 has IOC (so
+ * only AXS103 board has HW-coherent DMA peripherals)
+ * We don't need to mark pgu@17000 as dma-coherent because it uses
+ * external DMA buffer located outside of IOC aperture.
+ */
+ axs10x_mb {
+ ethernet@0x18000 {
+ dma-coherent;
+ };
+
+ ehci@0x40000 {
+ dma-coherent;
+ };
+
+ ohci@0x60000 {
+ dma-coherent;
+ };
+
+ mmc@0x15000 {
+ dma-coherent;
+ };
+ };
+
/*
* The DW APB ICTL intc on MB is connected to CPU intc via a
* DT "invisible" DW APB GPIO block, configured to simply pass thru
diff --git a/arch/arc/boot/dts/axc003_idu.dtsi b/arch/arc/boot/dts/axc003_idu.dtsi
index 69ff4895f2ba..a05bb737ea63 100644
--- a/arch/arc/boot/dts/axc003_idu.dtsi
+++ b/arch/arc/boot/dts/axc003_idu.dtsi
@@ -100,6 +100,32 @@
};
};

+ /*
+ * Mark DMA peripherals connected via IOC port as dma-coherent. We do
+ * it via overlay because peripherals defined in axs10x_mb.dtsi are
+ * used for both AXS101 and AXS103 boards and only AXS103 has IOC (so
+ * only AXS103 board has HW-coherent DMA peripherals)
+ * We don't need to mark pgu@17000 as dma-coherent because it uses
+ * external DMA buffer located outside of IOC aperture.
+ */
+ axs10x_mb {
+ ethernet@0x18000 {
+ dma-coherent;
+ };
+
+ ehci@0x40000 {
+ dma-coherent;
+ };
+
+ ohci@0x60000 {
+ dma-coherent;
+ };
+
+ mmc@0x15000 {
+ dma-coherent;
+ };
+ };
+
/*
* This INTC is actually connected to DW APB GPIO
* which acts as a wire between MB INTC and CPU INTC.
diff --git a/arch/arc/boot/dts/hsdk.dts b/arch/arc/boot/dts/hsdk.dts
index 006aa3de5348..ebb686c21393 100644
--- a/arch/arc/boot/dts/hsdk.dts
+++ b/arch/arc/boot/dts/hsdk.dts
@@ -176,6 +176,7 @@
phy-handle = <&phy0>;
resets = <&cgu_rst HSDK_ETH_RESET>;
reset-names = "stmmaceth";
+ dma-coherent;

mdio {
#address-cells = <1>;
@@ -194,12 +195,14 @@
compatible = "snps,hsdk-v1.0-ohci", "generic-ohci";
reg = <0x60000 0x100>;
interrupts = <15>;
+ dma-coherent;
};

ehci@40000 {
compatible = "snps,hsdk-v1.0-ehci", "generic-ehci";
reg = <0x40000 0x100>;
interrupts = <15>;
+ dma-coherent;
};

mmc@a000 {
@@ -212,6 +215,7 @@
clock-names = "biu", "ciu";
interrupts = <12>;
bus-width = <4>;
+ dma-coherent;
};
};

--
2.14.4
\
 
 \ /
  Last update: 2018-07-24 12:11    [W:0.103 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site