lkml.org 
[lkml]   [2018]   [Jul]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v0] arm64: dts: rockchip: add support for ROC-RK3399-PC board
Hi Levin,

Missatge de Heiko Stuebner <heiko@sntech.de> del dia dt., 24 de jul.
2018 a les 11:29:
>
> Hi Levin,
>
> Am Samstag, 21. Juli 2018, 10:30:26 CEST schrieb djw@t-chip.com.cn:
> > From: Levin Du <djw@t-chip.com.cn>
> >
> > ROC-RK3399-PC is the first power efficient 4GB DDR4 single board
>
> maybe "is a power efficient" instead of "the first" ;-)
>
> [...]
>
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts
> > new file mode 100644
> > index 0000000..207f2e3
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts
> > @@ -0,0 +1,717 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +/*
> > + * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
> > + */
> > +
> > +/dts-v1/;
> > +#include <dt-bindings/pwm/pwm.h>
> > +#include "rk3399.dtsi"
> > +#include "rk3399-opp.dtsi"
> > +
> > +/ {
> > + model = "Firefly ROC-RK3399-PC Board";
> > + compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
> > +
> > + chosen {
> > + bootargs = "earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1";
>
> I don't think we want to hard-code linux bootargs in the generic devicetree
>
> > + stdout-path = "serial2:1500000n8";
> > + };
> > +
> > + backlight: backlight {
> > + compatible = "pwm-backlight";
> > + enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
> > + pwms = <&pwm0 0 25000 0>;
> > + brightness-levels = <
> > + 0 1 2 3 4 5 6 7
>
> As Rob noted in the px30 evb patch, there is now a property helping
> to drop these long lists of brightness levels, see
> https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=1e5e7cc794b5a332c23216dade0a2e937d694b7f

Adding to the Heiko information. Did you try to just remove brightness-levels?
Without this property, the driver computes a default table with the
brightness levels filled with the numbers provided by the CIE 1931
algorithm. That algorithm is used to dim a led for human perception.

Note that the patches needed did not land yet, are in linux-next, and
you will also be interested in apply this patch [1].

[1] https://lkml.org/lkml/2018/7/24/116

>
>
> > + 8 9 10 11 12 13 14 15
> > + 16 17 18 19 20 21 22 23
> > + 24 25 26 27 28 29 30 31
> > + 32 33 34 35 36 37 38 39
> > + 40 41 42 43 44 45 46 47
> > + 48 49 50 51 52 53 54 55
> > + 56 57 58 59 60 61 62 63
> > + 64 65 66 67 68 69 70 71
> > + 72 73 74 75 76 77 78 79
> > + 80 81 82 83 84 85 86 87
> > + 88 89 90 91 92 93 94 95
> > + 96 97 98 99 100 101 102 103
> > + 104 105 106 107 108 109 110 111
> > + 112 113 114 115 116 117 118 119
> > + 120 121 122 123 124 125 126 127
> > + 128 129 130 131 132 133 134 135
> > + 136 137 138 139 140 141 142 143
> > + 144 145 146 147 148 149 150 151
> > + 152 153 154 155 156 157 158 159
> > + 160 161 162 163 164 165 166 167
> > + 168 169 170 171 172 173 174 175
> > + 176 177 178 179 180 181 182 183
> > + 184 185 186 187 188 189 190 191
> > + 192 193 194 195 196 197 198 199
> > + 200 201 202 203 204 205 206 207
> > + 208 209 210 211 212 213 214 215
> > + 216 217 218 219 220 221 222 223
> > + 224 225 226 227 228 229 230 231
> > + 232 233 234 235 236 237 238 239
> > + 240 241 242 243 244 245 246 247
> > + 248 249 250 251 252 253 254 255>;
> > + default-brightness-level = <200>;
> > + };
>
> [...]
>
> > + vcc_vbus_typec0: vcc-vbus-typec0 {
> > + compatible = "regulator-fixed";
> > + regulator-name = "vcc_vbus_typec0";
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <5000000>;
> > + regulator-max-microvolt = <5000000>;
> > + };
> > +
> > + vcc12v_sys: mp8859-dcdc1 {
>
> The mp8859 seems to be an i2c-device, as also shown by the
> nearly empty mp8859 entry below, so shouldn't this regulator
> be defined there?
>
>
> > + compatible = "regulator-fixed";
> > + regulator-name = "vcc12v_sys";
> > + regulator-always-on;
> > + regulator-boot-on;
> > + regulator-min-microvolt = <12000000>;
> > + regulator-max-microvolt = <12000000>;
> > + vin-supply = <&vcc_vbus_typec0>;
> > + };
>
> [...]
>
> > + vcc_hub_en: vcc_hub_en-regulator {
> > + compatible = "regulator-fixed";
> > + enable-active-high;
> > + gpio = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&hub_rst>;
> > + regulator-name = "vcc_hub_en";
> > + regulator-always-on;
>
> missing vin-supply
>
> > + };
> > +
>
> [...]
>
> > + vdd_cpu_b: regulator@40 {
> > + compatible = "silergy,syr827";
> > + reg = <0x40>;
> > + fcs,suspend-voltage-selector = <1>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&vsel1_gpio>;
> > + regulator-name = "vdd_cpu_b";
> > + regulator-min-microvolt = <712500>;
> > + regulator-max-microvolt = <1500000>;
> > + regulator-ramp-delay = <1000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + vsel-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
>
> vsel-gpios is not defined in the mainline dt-binding of the fan5355/syr82*
>
> > + vin-supply = <&vcc3v3_sys>;
> > +
> > + regulator-state-mem {
> > + regulator-off-in-suspend;
> > + };
> > + };
> > +
> > + vdd_gpu: regulator@41 {
> > + compatible = "silergy,syr828";
> > + reg = <0x41>;
> > + fcs,suspend-voltage-selector = <1>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&vsel2_gpio>;
> > + regulator-name = "vdd_gpu";
> > + regulator-min-microvolt = <712500>;
> > + regulator-max-microvolt = <1500000>;
> > + regulator-ramp-delay = <1000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + vsel-gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
>
> same as above
>
> > + vin-supply = <&vcc3v3_sys>;
> > +
> > + regulator-state-mem {
> > + regulator-off-in-suspend;
> > + };
> > + };
> > +};
> > +
> > +&i2c1 {
> > + i2c-scl-rising-time-ns = <300>;
> > + i2c-scl-falling-time-ns = <15>;
> > + status = "okay";
> > +};
> > +
> > +&i2c3 {
> > + i2c-scl-rising-time-ns = <450>;
> > + i2c-scl-falling-time-ns = <15>;
> > + status = "okay";
> > +};
> > +
> > +&i2c4 {
> > + i2c-scl-rising-time-ns = <600>;
> > + i2c-scl-falling-time-ns = <20>;
> > + status = "okay";
> > +
> > + mp8859: mp8859@66 {
> > + compatible = "mps,mp8859";
>
> missing a dt-binding and also a real regulator implementation?
>
> > + reg = <0x66>;
> > + };
> > +
> > + fusb1: usb-typec@22 {
> > + compatible = "fcs,fusb302";
> > + reg = <0x22>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&fusb1_int>;
> > + fcs,int-n = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
>
> mainline binding expects an "interrupts" property not the
> fcs,int-n from above
>
> > + status = "okay";
> > + };
> > +
> > +};
> > +
> > +&i2c7 {
> > + i2c-scl-rising-time-ns = <600>;
> > + i2c-scl-falling-time-ns = <20>;
> > + status = "okay";
> > +
> > + fusb0: usb-typec@22 {
> > + compatible = "fcs,fusb302";
> > + reg = <0x22>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&fusb0_int>;
> > + fcs,int-n = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
>
> same as above
>
> > + status = "okay";
> > + };
> > +};
> > +
> > +&i2s0 {
> > + rockchip,playback-channels = <8>;
> > + rockchip,capture-channels = <8>;
> > + #sound-dai-cells = <0>;
>
> sound-dai-cells are in rk3399.dtsi now ... see
> https://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git/commit/?id=4486baca66e7a96a6ded3957cb522872a49870ce
>
> > + status = "okay";
> > +};
> > +
> > +&i2s1 {
> > + rockchip,playback-channels = <2>;
> > + rockchip,capture-channels = <2>;
> > + #sound-dai-cells = <0>;
>
> same as above
>
> > + status = "okay";
> > +};
> > +
> > +&i2s2 {
> > + #sound-dai-cells = <0>;
>
> same as above
>
> > + status = "okay";
> > +};
> > +
>
> > +&tcphy0 {
> > + extcon = <&fusb0>;
>
> the extcon is not described in the mainline fusb302 binding.
>
> > + status = "okay";
> > +};
> > +
> > +&tcphy1 {
> > + extcon = <&fusb1>;
>
> same as above
>
> > + status = "okay";
> > +};
> > +
> > +&tsadc {
> > + /* tshut mode 0:CRU 1:GPIO */
> > + rockchip,hw-tshut-mode = <1>;
> > + /* tshut polarity 0:LOW 1:HIGH */
> > + rockchip,hw-tshut-polarity = <1>;
> > + status = "okay";
> > +};
> > +
> > +&u2phy0 {
> > + status = "okay";
> > +
> > + u2phy0_otg: otg-port {
> > + phy-supply = <&vcc5v0_host>;
> > + //status = "disabled";
>
> don't leave commented stuff in the dt please.
>
> > + status = "okay";
> > + };
> > +
> > + u2phy0_host: host-port {
> > + phy-supply = <&vcc5v0_host>;
> > + status = "okay";
> > + };
> > +};
> > +
> > +&u2phy1 {
> > + status = "okay";
> > +
> > + u2phy1_otg: otg-port {
> > + phy-supply = <&vcc5v0_host>;
> > + //status = "disabled";
>
> same as above
>
> > + status = "okay";
> > + };
> > +
> > + u2phy1_host: host-port {
> > + phy-supply = <&vcc5v0_host>;
> > + status = "okay";
> > + };
> > +};
>
>
> Thanks
> Heiko
>

Best regards,
Enric

>
>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip

\
 
 \ /
  Last update: 2018-07-24 11:54    [W:0.118 / U:7.540 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site