lkml.org 
[lkml]   [2018]   [Jul]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 2/3] arm64: allwinner: dts: h6: add pinmux for MMC1
From


于 2018年7月24日 GMT+08:00 下午4:56:39, Maxime Ripard <maxime.ripard@bootlin.com> 写到:
>On Tue, Jul 24, 2018 at 09:15:50AM +0800, Icenowy Zheng wrote:
>> The MMC1 controller on H6, in the reference design and most third
>party
>> design, is used to connect SDIO Wi-Fi.
>>
>> Add pinmux for it.
>>
>> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
>> ---
>> arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 8 ++++++++
>> 1 file changed, 8 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
>b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
>> index cfa5fffcf62b..ba1a3a3e2149 100644
>> --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
>> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
>> @@ -134,6 +134,14 @@
>> bias-pull-up;
>> };
>>
>> + mmc1_pins: mmc1-pins {
>> + pins = "PG0", "PG1", "PG2", "PG3",
>> + "PG4", "PG5";
>> + function = "mmc1";
>> + drive-strength = <30>;
>> + bias-pull-up;
>> + };
>> +
>
>Is that the sole muxing option for MMC1? If so, it should be added to
>the mmc1 node.

Oh... yes, it is.

Will do in v2.

>
>Maxime

\
 
 \ /
  Last update: 2018-07-24 10:58    [W:0.045 / U:1.816 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site