lkml.org 
[lkml]   [2018]   [Jul]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 04/15] MIPS: dts: img: pistachio_marduk: Switch mmc to 1 bit mode
From
Date
Am 22.07.2018 um 23:19 schrieb Andreas Färber:
> From: Ian Pozella <Ian.Pozella@imgtec.com>
>
> The mmc block in Pistachio allows 1 to 8 data bits to be used.
> Marduk uses 4 bits allowing the upper 4 bits to be allocated
> to the Mikrobus ports. However these bits are still connected
> internally meaning the mmc block recieves signals on all data lines

"receives"

I had fixed a number of typos from the downstream patches already, but
this one slipped through.

Regards,
Andreas

> and seems the internal HW CRC checks get corrupted by this erroneous
> data.
>
> We cannot control what data is sent on these lines because they go
> to external ports. 1 bit mode does not exhibit the issue hence the
> safe default is to use this. If a user knows that in their use case
> they will not use the upper bits then they can set to 4 bit mode in
> order to improve performance.
>
> Also make sure that the upper 4 bits don't get allocated to the mmc
> driver (the default is to assign all 8 pins) so they can be allocated
> to other drivers. Allocating all 4 despite setting 1 bit mode as this
> matches what is there in hardware.
>
> Signed-off-by: Ian Pozella <Ian.Pozella@imgtec.com>
> Signed-off-by: Andreas Färber <afaerber@suse.de>
[snip]

--
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)

\
 
 \ /
  Last update: 2018-07-25 00:15    [W:0.146 / U:2.804 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site