lkml.org 
[lkml]   [2018]   [Jul]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 01/12] mfd: dt-bindings: Add wcd9335 mfd bindings
Date
Qualcomm WCD9335 Codec is a standalone Hi-Fi audio codec IC, supports
Qualcomm Technologies, Inc. (QTI) multimedia solutions, including
the MSM8996, MSM8976, and MSM8956 chipsets. It has in-build
Soundwire controller, interrupt mux. It supports both I2S/I2C and
SLIMbus audio interfaces.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
.../devicetree/bindings/mfd/qcom,wcd9335.txt | 130 +++++++++++++++++++++
1 file changed, 130 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/qcom,wcd9335.txt

diff --git a/Documentation/devicetree/bindings/mfd/qcom,wcd9335.txt b/Documentation/devicetree/bindings/mfd/qcom,wcd9335.txt
new file mode 100644
index 000000000000..1f8c9e8d4e3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/qcom,wcd9335.txt
@@ -0,0 +1,130 @@
+QCOM WCD9335 Codec
+
+Qualcomm WCD9335 Codec is a standalone Hi-Fi audio codec IC, supports
+Qualcomm Technologies, Inc. (QTI) multimedia solutions, including
+the MSM8996, MSM8976, and MSM8956 chipsets. It has in-build
+Soundwire controller, interrupt mux. It supports both I2S/I2C and
+SLIMbus audio interfaces.
+
+Required properties with SLIMbus Interface:
+
+- compatible:
+ Usage: required
+ Value type: <stringlist>
+ Definition: For SLIMbus interface it should be "slimMID,PID",
+ textual representation of Manufacturer ID, Product Code,
+ shall be in lower case hexadecimal with leading zeroes
+ suppressed. Refer to slimbus/bus.txt for details.
+ Should be:
+ "slim217,1a0" for MSM8996 and APQ8096 SoCs with SLIMbus.
+
+- reg
+ Usage: required
+ Value type: <u32 u32>
+ Definition: Should be ('Device index', 'Instance ID')
+
+- interrupts
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: Interrupts via WCD INTR1 and INTR2 pins
+
+- interrupt-names:
+ Usage: required
+ Value type: <String array>
+ Definition: Interrupt names of WCD INTR1 and INTR2
+ Should be: "intr1", "intr2"
+
+- reset-gpio:
+ Usage: required
+ Value type: <String Array>
+ Definition: Reset gpio line
+
+- qcom,ifd:
+ Usage: required
+ Value type: <phandle>
+ Definition: SLIM interface device
+
+- clocks:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: See clock-bindings.txt section "consumers". List of
+ three clock specifiers for mclk, mclk2 and slimbus clock.
+
+- clock-names:
+ Usage: required
+ Value type: <string>
+ Definition: Must contain "mclk", "mclk2" and "slimbus" strings.
+
+- vdd-buck-supply:
+ Usage: required
+ Value type: <phandle>
+ Definition: Should contain a reference to the 1.8V buck supply
+
+- vdd-buck-sido-supply:
+ Usage: required
+ Value type: <phandle>
+ Definition: Should contain a reference to the 1.8V SIDO buck supply
+
+- vdd-rx-supply:
+ Usage: required
+ Value type: <phandle>
+ Definition: Should contain a reference to the 1.8V rx supply
+
+- vdd-tx-supply:
+ Usage: required
+ Value type: <phandle>
+ Definition: Should contain a reference to the 1.8V tx supply
+
+- vdd-vbat-supply:
+ Usage: Optional
+ Value type: <phandle>
+ Definition: Should contain a reference to the vbat supply
+
+- vdd-micbias-supply:
+ Usage: required
+ Value type: <phandle>
+ Definition: Should contain a reference to the micbias supply
+
+- vdd-io-supply:
+ Usage: required
+ Value type: <phandle>
+ Definition: Should contain a reference to the 1.8V io supply
+
+- interrupt-controller:
+ Usage: required
+ Definition: Indicating that this is a interrupt controller
+
+- #interrupt-cells:
+ Usage: required
+ Value type: <int>
+ Definition: should be 1
+
+= WCD9335 Child devices
+Each subnode of WCD9335 represents a functional blocks like
+"audio codec", "soundwire Controller" of WCD. The name of the
+nodes are not important. The properties of these nodes are
+defined by the individual bindings for the specific device.
+
+Example:
+
+wcd9335@1 {
+ compatible = "slim217,1a0";
+ reg = <1 0>;
+ interrupts = <&msmgpio 54 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "intr2"
+ reset-gpio = <&msmgpio 64 0>;
+ qcom,ifd = <&wc9335_ifd>;
+ clock-names = "mclk", "native";
+ clocks = <&rpmcc RPM_SMD_DIV_CLK1>,
+ <&rpmcc RPM_SMD_BB_CLK1>;
+ vdd-buck-supply = <&pm8994_s4>;
+ vdd-rx-supply = <&pm8994_s4>;
+ vdd-buck-sido-supply = <&pm8994_s4>;
+ vdd-tx-supply = <&pm8994_s4>;
+ vdd-io-supply = <&pm8994_s4>;
+
+ codec {
+ compatible = "qcom,wcd9335-codec";
+ #sound-dai-cells = <1>;
+ };
+}
--
2.16.2
\
 
 \ /
  Last update: 2018-07-23 18:00    [W:0.167 / U:2.540 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site