lkml.org 
[lkml]   [2018]   [Jul]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] media: i2c: Add driver for Aptina MT9V111
Hi Jacopo,

Apologies for the late review. Please see my comments below.

On Mon, Jun 11, 2018 at 05:17:33PM +0200, Jacopo Mondi wrote:
> Add V4L2 sensor driver for Aptina MT9V111 CMOS image sensor.
>
> The MT9V111 is a 1/4-Inch CMOS image sensor based on MT9V011 with an
> integrated Image Flow Processor.
>
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> ---
> MAINTAINERS | 8 +

Could you move the MAINTAINERS change to the DT binding documentation
patch? Currently I presume adding a binding file which isn't accounted for
produces a checkpatch.pl warning.

> drivers/media/i2c/Kconfig | 12 +
> drivers/media/i2c/Makefile | 1 +
> drivers/media/i2c/mt9v111.c | 1297 +++++++++++++++++++++++++++++++++++++++++++
> 4 files changed, 1318 insertions(+)
> create mode 100644 drivers/media/i2c/mt9v111.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index a38e24a..2c2fe60 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -9523,6 +9523,14 @@ F: Documentation/devicetree/bindings/media/i2c/mt9v032.txt
> F: drivers/media/i2c/mt9v032.c
> F: include/media/i2c/mt9v032.h
>
> +MT9V111 APTINA CAMERA SENSOR
> +M: Jacopo Mondi <jacopo@jmondi.org>
> +L: linux-media@vger.kernel.org
> +T: git git://linuxtv.org/media_tree.git
> +S: Maintained
> +F: Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.txt
> +F: drivers/media/i2c/mt9v111.c
> +
> MULTIFUNCTION DEVICES (MFD)
> M: Lee Jones <lee.jones@linaro.org>
> T: git git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git
> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> index 341452f..0bd867d 100644
> --- a/drivers/media/i2c/Kconfig
> +++ b/drivers/media/i2c/Kconfig
> @@ -841,6 +841,18 @@ config VIDEO_MT9V032
> This is a Video4Linux2 sensor-level driver for the Micron
> MT9V032 752x480 CMOS sensor.
>
> +config VIDEO_MT9V111
> + tristate "Aptina MT9V111 sensor support"
> + depends on I2C && VIDEO_V4L2
> + depends on MEDIA_CAMERA_SUPPORT
> + depends on OF

Why OF? I see no effective OF dependencies in the driver.

> + help
> + This is a Video4Linux2 sensor-level driver for the Aptina/Micron
> + MT9V111 sensor.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called mt9v111.
> +
> config VIDEO_SR030PC30
> tristate "Siliconfile SR030PC30 sensor support"
> depends on I2C && VIDEO_V4L2
> diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
> index d679d57..f0e8618 100644
> --- a/drivers/media/i2c/Makefile
> +++ b/drivers/media/i2c/Makefile
> @@ -84,6 +84,7 @@ obj-$(CONFIG_VIDEO_MT9T001) += mt9t001.o
> obj-$(CONFIG_VIDEO_MT9T112) += mt9t112.o
> obj-$(CONFIG_VIDEO_MT9V011) += mt9v011.o
> obj-$(CONFIG_VIDEO_MT9V032) += mt9v032.o
> +obj-$(CONFIG_VIDEO_MT9V111) += mt9v111.o
> obj-$(CONFIG_VIDEO_SR030PC30) += sr030pc30.o
> obj-$(CONFIG_VIDEO_NOON010PC30) += noon010pc30.o
> obj-$(CONFIG_VIDEO_S5K6AA) += s5k6aa.o
> diff --git a/drivers/media/i2c/mt9v111.c b/drivers/media/i2c/mt9v111.c
> new file mode 100644
> index 0000000..36e7424
> --- /dev/null
> +++ b/drivers/media/i2c/mt9v111.c
> @@ -0,0 +1,1297 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * V4L2 sensor driver for Aptina MT9V111 image sensor
> + * Copyright (C) 2018 Jacopo Mondi <jacopo@jmondi.org>
> + *
> + * Based on mt9v032 driver
> + * Copyright (C) 2010, Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> + * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
> + *
> + * Base on mt9v011 driver
> + * Copyright (c) 2009 Mauro Carvalho Chehab <mchehab@kernel.org>
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/i2c.h>
> +#include <linux/of.h>
> +#include <linux/slab.h>
> +#include <linux/videodev2.h>
> +#include <linux/v4l2-mediabus.h>
> +#include <linux/module.h>
> +
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-fwnode.h>
> +#include <media/v4l2-image-sizes.h>
> +#include <media/v4l2-subdev.h>
> +
> +/*
> + * MT9V111 is a 1/4-Inch CMOS digital image sensor with an integrated
> + * Image Flow Processing (IFP) engine and a sensor core loosely based on
> + * MT9V011.
> + *
> + * The IFP can produce several output image formats from the sensor core
> + * output, this driver currently supports only YUYV format permutations.
> + *
> + * As the auto exposure algorithms controls exposure time and modifies the
> + * frame rate, this driver disables auto exposure control, auto white balancing
> + * and auto flickering avoidance to allow manual frame rate control through
> + * s_frame_interval subdev operation or V4L2_CID_V/HBLANK controls.
> + *
> + * While it seems possible to instruct the auto-exposure control algorithm to
> + * respect a programmed frame rate when adjusting the pixel integration time,
> + * registers controlling this feature are not documented in the public
> + * available sensor manual used to develop this driver (09005aef80e90084,
> + * MT9V111_1.fm - Rev. G 1/05 EN).
> + */
> +
> +#define MT9V111_CHIP_ID_HIGH 0x82
> +#define MT9V111_CHIP_ID_LOW 0x3a
> +
> +#define MT9V111_R01_ADDR_SPACE 0x01
> +#define MT9V111_R01_IFP 0x01
> +#define MT9V111_R01_CORE 0x04
> +
> +#define MT9V111_IFP_R06_OPMODE_CTRL 0x06
> +#define MT9V111_IFP_R06_OPMODE_CTRL_AWB_EN BIT(1)
> +#define MT9V111_IFP_R06_OPMODE_CTRL_AE_EN BIT(14)
> +#define MT9V111_IFP_R07_IFP_RESET 0x07
> +#define MT9V111_IFP_R07_IFP_RESET_MASK BIT(0)
> +#define MT9V111_IFP_R08_OUTFMT_CTRL 0x08
> +#define MT9V111_IFP_R08_OUTFMT_CTRL_FLICKER BIT(11)
> +#define MT9V111_IFP_R08_OUTFMT_CTRL_PCLK BIT(5)
> +#define MT9V111_IFP_R3A_OUTFMT_CTRL2 0x3a
> +#define MT9V111_IFP_R3A_OUTFMT_CTRL2_SWAP_CBCR BIT(0)
> +#define MT9V111_IFP_R3A_OUTFMT_CTRL2_SWAP_YC BIT(1)
> +#define MT9V111_IFP_R3A_OUTFMT_CTRL2_SWAP_MASK GENMASK(2, 0)
> +#define MT9V111_IFP_RA5_HPAN 0xa5
> +#define MT9V111_IFP_RA6_HZOOM 0xa6
> +#define MT9V111_IFP_RA7_HOUT 0xa7
> +#define MT9V111_IFP_RA8_VPAN 0xa8
> +#define MT9V111_IFP_RA9_VZOOM 0xa9
> +#define MT9V111_IFP_RAA_VOUT 0xaa
> +#define MT9V111_IFP_DECIMATION_MASK GENMASK(9, 0)
> +#define MT9V111_IFP_DECIMATION_FREEZE BIT(15)
> +
> +#define MT9V111_CORE_R03_WIN_HEIGHT 0x03
> +#define MT9V111_CORE_R03_WIN_V_OFFS 2
> +#define MT9V111_CORE_R04_WIN_WIDTH 0x04
> +#define MT9V111_CORE_R04_WIN_H_OFFS 114
> +#define MT9V111_CORE_R05_HBLANK 0x05
> +#define MT9V111_CORE_R05_MIN_HBLANK 0x09
> +#define MT9V111_CORE_R05_MAX_HBLANK GENMASK(9, 0)
> +#define MT9V111_CORE_R05_DEF_HBLANK 0x26
> +#define MT9V111_CORE_R06_VBLANK 0x06
> +#define MT9V111_CORE_R06_MIN_VBLANK 0x03
> +#define MT9V111_CORE_R06_MAX_VBLANK GENMASK(11, 0)
> +#define MT9V111_CORE_R06_DEF_VBLANK 0x04
> +#define MT9V111_CORE_R07_OUT_CTRL 0x07
> +#define MT9V111_CORE_R07_OUT_CTRL_SAMPLE BIT(4)
> +#define MT9V111_CORE_R09_PIXEL_INT 0x09
> +#define MT9V111_CORE_R09_PIXEL_INT_MASK GENMASK(11, 0)
> +#define MT9V111_CORE_R0D_CORE_RESET 0x0d
> +#define MT9V111_CORE_R0D_CORE_RESET_MASK BIT(0)
> +#define MT9V111_CORE_RFF_CHIP_VER 0xff
> +
> +#define MT9V111_PIXEL_ARRAY_WIDTH 640
> +#define MT9V111_PIXEL_ARRAY_HEIGHT 480
> +
> +#define MT9V111_MAX_CLKIN 27000000
> +
> +struct mt9v111_dev {
> + struct device *dev;
> + struct i2c_client *client;
> +
> + /* Protects address space change operations. */
> + spinlock_t addr_lock;
> + u8 addr_space;
> +
> + struct v4l2_subdev sd;
> +#if defined(CONFIG_MEDIA_CONTROLLER)
> + struct media_pad pad;
> +#endif
> +
> + struct v4l2_ctrl *hblank;
> + struct v4l2_ctrl *vblank;
> + struct v4l2_ctrl_handler ctrls;
> +
> + /* Output image format and sizes. */
> + struct v4l2_mbus_framefmt fmt;
> + unsigned int fps;
> +
> + /* Protects power up/down sequences. */
> + struct mutex pwr_mutex;
> + int pwr_count;
> +
> + /* Protects stream on/off sequences. */
> + struct mutex stream_mutex;
> + bool streaming;
> +
> + /* Flags to mark HW settings as not yet applied. */
> + bool pending;
> +
> + /* Clock provider and system clock frequency. */
> + struct clk *clk;
> + u32 sysclk;
> +
> + struct gpio_desc *oe;
> + struct gpio_desc *standby;
> + struct gpio_desc *reset;
> +};
> +
> +#define sd_to_mt9v111(__sd) container_of(__sd, struct mt9v111_dev, sd)
> +
> +/*
> + * mt9v111_mbus_fmt - List all media bus formats supported by the driver.
> + *
> + * Only list the media bus code here. The image sizes are freely configurable
> + * in the pixel array sizes range.
> + *
> + * The frame desired frame interval, in the supported frame interval range, is
> + * obtained by configuring blanking as the sensor does not have a PLL but
> + * only a fixed clock divider that generates the output pixel clock.
> + */
> +static struct mt9v111_mbus_fmt {
> + u32 code;
> +} mt9v111_formats[] = {
> + {
> + .code = MEDIA_BUS_FMT_UYVY8_2X8,
> + },
> + {
> + .code = MEDIA_BUS_FMT_YUYV8_2X8,
> + },
> + {
> + .code = MEDIA_BUS_FMT_VYUY8_2X8,
> + },
> + {
> + .code = MEDIA_BUS_FMT_YVYU8_2X8,
> + },
> +};
> +
> +static u32 mt9v111_frame_intervals[] = {5, 10, 15, 20, 30};
> +
> +/*
> + * mt9v111_frame_sizes - List sensor's supported resolutions.
> + *
> + * Resolution generated through decimation in the IFP block from the
> + * full VGA pixel array.
> + */
> +static struct v4l2_rect mt9v111_frame_sizes[] = {
> + {
> + .width = 640,
> + .height = 480,
> + },
> + {
> + .width = 352,
> + .height = 288
> + },
> + {
> + .width = 320,
> + .height = 240,
> + },
> + {
> + .width = 176,
> + .height = 144,
> + },
> + {
> + .width = 160,
> + .height = 120,
> + },
> +};
> +
> +/* Initial register configuration. */
> +static struct mt9v111_reg_list {
> + u8 space;
> + u8 reg;
> + u16 mask;
> + u16 val;
> +} mt9v111_init_config[] = {
> + {
> + /* Disable AE and AWB to enable manual frame rate control. */
> + .space = MT9V111_R01_IFP,
> + .reg = MT9V111_IFP_R06_OPMODE_CTRL,
> + .mask = MT9V111_IFP_R06_OPMODE_CTRL_AWB_EN |
> + MT9V111_IFP_R06_OPMODE_CTRL_AE_EN,
> + .val = 0,
> + },
> + {
> + /* Disable anti-flicker to enable manual frame rate control. */
> + .space = MT9V111_R01_IFP,
> + .reg = MT9V111_IFP_R08_OUTFMT_CTRL,
> + .mask = MT9V111_IFP_R08_OUTFMT_CTRL_FLICKER,
> + .val = 0,
> + },
> +
> + /* TODO: AE and AWB manual configuration. */
> +};
> +
> +/* --- Device I/O access --- */
> +
> +static int __mt9v111_read(struct i2c_client *c, u8 reg, u16 *val)
> +{
> + struct i2c_msg msg[2];
> + __be16 buf;
> + int ret;
> +
> + msg[0].addr = c->addr;
> + msg[0].flags = 0;
> + msg[0].len = 1;
> + msg[0].buf = &reg;
> +
> + msg[1].addr = c->addr;
> + msg[1].flags = I2C_M_RD;
> + msg[1].len = 2;
> + msg[1].buf = (char *)&buf;
> +
> + ret = i2c_transfer(c->adapter, msg, 2);
> + if (ret < 0) {
> + dev_err(&c->dev, "i2c read transfer error: %d\n", ret);
> + return ret;
> + }
> +
> + *val = be16_to_cpu(buf);
> +
> + dev_info(&c->dev, "%s: %x=%x\n", __func__, reg, *val);
> +
> + return 0;
> +}
> +
> +static int __mt9v111_write(struct i2c_client *c, u8 reg, u16 val)
> +{
> + struct i2c_msg msg;
> + u8 buf[3] = { 0 };
> + int ret;
> +
> + buf[0] = reg;
> + buf[1] = val >> 8;
> + buf[2] = val & 0xff;
> +
> + msg.addr = c->addr;
> + msg.flags = 0;
> + msg.len = 3;
> + msg.buf = (char *)buf;
> +
> + dev_info(&c->dev, "%s: %x = %x%x\n", __func__, reg, buf[1], buf[2]);
> +
> + ret = i2c_transfer(c->adapter, &msg, 1);
> + if (ret < 0) {
> + dev_err(&c->dev, "i2c write transfer error: %d\n", ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int __mt9v111_addr_space_select(struct i2c_client *c, u16 addr_space)
> +{
> + struct v4l2_subdev *sd = i2c_get_clientdata(c);
> + struct mt9v111_dev *mt9v111 = sd_to_mt9v111(sd);
> + u16 val;
> + int ret;
> +
> + spin_lock(&mt9v111->addr_lock);
> + if (mt9v111->addr_space == addr_space) {
> + spin_unlock(&mt9v111->addr_lock);
> + return 0;
> + }
> + spin_unlock(&mt9v111->addr_lock);
> +
> + ret = __mt9v111_write(c, MT9V111_R01_ADDR_SPACE, addr_space);
> + if (ret)
> + return ret;
> +
> + /* Verify address space has been updated */
> + ret = __mt9v111_read(c, MT9V111_R01_ADDR_SPACE, &val);
> + if (ret)
> + return ret;
> +
> + if (val != addr_space)
> + return -EINVAL;
> +
> + mt9v111->addr_space = addr_space;
> +
> + return 0;
> +}
> +
> +static int mt9v111_read(struct i2c_client *c, u8 addr_space, u8 reg, u16 *val)
> +{
> + int ret;
> +
> + /* Select register address space first. */
> + ret = __mt9v111_addr_space_select(c, addr_space);
> + if (ret)
> + return ret;
> +
> + ret = __mt9v111_read(c, reg, val);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +static int mt9v111_write(struct i2c_client *c, u8 addr_space, u8 reg, u16 val)
> +{
> + int ret;
> +
> + /* Select register address space first. */
> + ret = __mt9v111_addr_space_select(c, addr_space);
> + if (ret)
> + return ret;
> +
> + ret = __mt9v111_write(c, reg, val);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +static int mt9v111_update(struct i2c_client *c, u8 addr_space, u8 reg,
> + u16 mask, u16 val)
> +{
> + u16 current_val;
> + int ret;
> +
> + /* Select register address space first. */
> + ret = __mt9v111_addr_space_select(c, addr_space);
> + if (ret)
> + return ret;
> +
> + /* Read the current register value, then update it. */
> + ret = __mt9v111_read(c, reg, &current_val);
> + if (ret)
> + return ret;
> +
> + current_val &= ~mask;
> + current_val |= (val & mask);
> + ret = __mt9v111_write(c, reg, current_val);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +static int mt9v111_update_reglist(struct i2c_client *c,
> + struct mt9v111_reg_list *reg_list,
> + unsigned int n_regs)
> +{
> + unsigned int i;
> + int ret;
> +
> + for (i = 0; i < n_regs; i++) {
> + struct mt9v111_reg_list *reg = &reg_list[i];
> +
> + ret = mt9v111_update(c, reg->space, reg->reg, reg->mask,
> + reg->val);
> + if (ret)
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +/* --- Sensor HW operations --- */
> +
> +static int __mt9v111_power_on(struct v4l2_subdev *sd)
> +{
> + struct mt9v111_dev *mt9v111 = sd_to_mt9v111(sd);
> + int ret;
> +
> + ret = clk_prepare_enable(mt9v111->clk);
> + if (ret)
> + return ret;
> +
> + clk_set_rate(mt9v111->clk, mt9v111->sysclk);
> +
> + gpiod_set_value(mt9v111->standby, 0);
> + usleep_range(500, 1000);
> +
> + gpiod_set_value(mt9v111->oe, 1);
> + usleep_range(500, 1000);
> +
> + return 0;
> +}
> +
> +static int __mt9v111_power_off(struct v4l2_subdev *sd)
> +{
> + struct mt9v111_dev *mt9v111 = sd_to_mt9v111(sd);
> +
> + gpiod_set_value(mt9v111->oe, 0);
> + usleep_range(500, 1000);
> +
> + gpiod_set_value(mt9v111->standby, 1);
> + usleep_range(500, 1000);
> +
> + clk_disable_unprepare(mt9v111->clk);
> +
> + return 0;
> +}
> +
> +static int __mt9v111_hw_reset(struct mt9v111_dev *mt9v111)
> +{
> + if (!mt9v111->reset)
> + return -EINVAL;
> +
> + gpiod_set_value(mt9v111->reset, 1);
> + usleep_range(500, 1000);
> +
> + gpiod_set_value(mt9v111->reset, 0);
> + usleep_range(500, 1000);
> +
> + return 0;
> +}
> +
> +static int __mt9v111_sw_reset(struct mt9v111_dev *mt9v111)
> +{
> + struct i2c_client *c = mt9v111->client;
> + unsigned int ret;
> +
> + /* Software reset core and IFP blocks. */
> +
> + ret = mt9v111_update(c, MT9V111_R01_CORE,
> + MT9V111_CORE_R0D_CORE_RESET,
> + MT9V111_CORE_R0D_CORE_RESET_MASK, 1);
> + if (ret)
> + return ret;
> + usleep_range(500, 1000);
> +
> + ret = mt9v111_update(c, MT9V111_R01_CORE,
> + MT9V111_CORE_R0D_CORE_RESET,
> + MT9V111_CORE_R0D_CORE_RESET_MASK, 0);
> + if (ret)
> + return ret;
> + usleep_range(500, 1000);
> +
> + ret = mt9v111_update(c, MT9V111_R01_IFP,
> + MT9V111_IFP_R07_IFP_RESET,
> + MT9V111_IFP_R07_IFP_RESET_MASK, 1);
> + if (ret)
> + return ret;
> + usleep_range(500, 1000);
> +
> + ret = mt9v111_update(c, MT9V111_R01_IFP,
> + MT9V111_IFP_R07_IFP_RESET,
> + MT9V111_IFP_R07_IFP_RESET_MASK, 0);
> + if (ret)
> + return ret;
> + usleep_range(500, 1000);
> +
> + return 0;
> +}
> +
> +static int mt9v111_calc_frame_rate(struct mt9v111_dev *mt9v111,
> + struct v4l2_fract *tpf)
> +{
> + unsigned int fps = tpf->numerator ?
> + tpf->denominator / tpf->numerator :
> + tpf->denominator;
> + unsigned int best_diff;
> + unsigned int frm_cols;
> + unsigned int row_pclk;
> + unsigned int best_fps;
> + unsigned int pclk;
> + unsigned int diff;
> + unsigned int idx;
> + unsigned int hb;
> + unsigned int vb;
> + unsigned int i;
> + int ret;
> +
> + /* Approximate to the closest supported frame interval. */
> + best_diff = ~0L;
> + for (i = 0, idx = 0; i < ARRAY_SIZE(mt9v111_frame_intervals); i++) {
> + diff = abs(fps - mt9v111_frame_intervals[i]);
> + if (diff < best_diff) {
> + idx = i;
> + best_diff = diff;
> + }
> + }
> + fps = mt9v111_frame_intervals[idx];
> +
> + /*
> + * The sensor does not provide a PLL circuitry and pixel clock is
> + * generated dividing by two the master clock source.
> + *
> + * Trow = (W + Hblank + 114) * 2 * (1 / SYSCLK)
> + * TFrame = Trow * (H + Vblank + 2)
> + *
> + * FPS = (SYSCLK / 2) / (Trow * (H + Vblank + 2))
> + *
> + * This boils down to tune H and V blanks to best approximate the
> + * above equation.
> + *
> + * Test all available H/V blank values, until we reach the
> + * desired frame rate.
> + */
> + best_fps = vb = hb = 0;
> + pclk = DIV_ROUND_CLOSEST(mt9v111->sysclk, 2);
> + row_pclk = MT9V111_PIXEL_ARRAY_WIDTH + 7 + MT9V111_CORE_R04_WIN_H_OFFS;
> + frm_cols = MT9V111_PIXEL_ARRAY_HEIGHT + 7 + MT9V111_CORE_R03_WIN_V_OFFS;
> +
> + best_diff = ~0L;
> + for (vb = MT9V111_CORE_R06_MIN_VBLANK;
> + vb < MT9V111_CORE_R06_MAX_VBLANK; vb++) {
> + for (hb = MT9V111_CORE_R05_MIN_HBLANK;
> + hb < MT9V111_CORE_R05_MAX_HBLANK; hb += 10) {
> + unsigned int t_frame = (row_pclk + hb) *
> + (frm_cols + vb);
> + unsigned int t_fps = DIV_ROUND_CLOSEST(pclk, t_frame);
> +
> + diff = abs(fps - t_fps);
> + if (diff < best_diff) {
> + best_diff = diff;
> + best_fps = t_fps;
> +
> + if (diff == 0)
> + break;
> + }
> + }
> +
> + if (diff == 0)
> + break;
> + }
> +
> + dev_info(mt9v111->dev, "FPS: %u, hb = %u, vb = %u\n", fps, hb, vb);
> +
> + ret = v4l2_ctrl_s_ctrl_int64(mt9v111->hblank, hb);
> + if (ret)
> + return ret;
> +
> + ret = v4l2_ctrl_s_ctrl_int64(mt9v111->vblank, vb);
> + if (ret)
> + return ret;
> +
> + tpf->numerator = 1;
> + tpf->denominator = best_fps;
> +
> + return 0;
> +}
> +
> +static int mt9v111_hw_config(struct mt9v111_dev *mt9v111)
> +{
> + struct i2c_client *c = mt9v111->client;
> + unsigned int ret;
> + u16 outfmtctrl2;
> +
> + /* Force device reset. */
> + ret = __mt9v111_hw_reset(mt9v111);
> + if (ret == -EINVAL)
> + ret = __mt9v111_sw_reset(mt9v111);
> + if (ret)
> + return ret;
> +
> + /*
> + * Disable AE, AWB and anti-flickering to allow manual frame rate
> + * control.
> + */
> + ret = mt9v111_update_reglist(c, mt9v111_init_config,
> + ARRAY_SIZE(mt9v111_init_config));
> + if (ret)
> + return ret;
> +
> + /* Configure internal clock sample rate. */
> + ret = mt9v111->sysclk < DIV_ROUND_CLOSEST(MT9V111_MAX_CLKIN, 2) ?
> + mt9v111_update(c, MT9V111_R01_CORE,
> + MT9V111_CORE_R07_OUT_CTRL,
> + MT9V111_CORE_R07_OUT_CTRL_SAMPLE, 1) :
> + mt9v111_update(c, MT9V111_R01_CORE,
> + MT9V111_CORE_R07_OUT_CTRL,
> + MT9V111_CORE_R07_OUT_CTRL_SAMPLE, 0);
> + if (ret)
> + return ret;
> +
> + /*
> + * Configure output image format components ordering.
> + *
> + * TODO: IFP block can also output several RGB permutations, we only
> + * support YUYV permutations at the moment.
> + */
> + switch (mt9v111->fmt.code) {
> + case MEDIA_BUS_FMT_YUYV8_2X8:
> + outfmtctrl2 = MT9V111_IFP_R3A_OUTFMT_CTRL2_SWAP_YC;
> + break;
> + case MEDIA_BUS_FMT_VYUY8_2X8:
> + outfmtctrl2 = MT9V111_IFP_R3A_OUTFMT_CTRL2_SWAP_CBCR;
> + break;
> + case MEDIA_BUS_FMT_YVYU8_2X8:
> + outfmtctrl2 = MT9V111_IFP_R3A_OUTFMT_CTRL2_SWAP_YC |
> + MT9V111_IFP_R3A_OUTFMT_CTRL2_SWAP_CBCR;
> + break;
> + case MEDIA_BUS_FMT_UYVY8_2X8:
> + default:
> + outfmtctrl2 = 0;
> + break;
> + }
> +
> + ret = mt9v111_update(c, MT9V111_R01_IFP, MT9V111_IFP_R3A_OUTFMT_CTRL2,
> + MT9V111_IFP_R3A_OUTFMT_CTRL2_SWAP_MASK,
> + outfmtctrl2);
> + if (ret)
> + return ret;
> +
> + /*
> + * Do not change default sensor's core configuration:
> + * output the whole 640x480 pixel array, skip 18 columns and 6 rows.
> + *
> + * Instead, control the output image size through IFP block.
> + *
> + * TODO: No zoom&pan support. Currently we control the output image
> + * size only through decimation, with no zoom support.
> + */
> + ret = mt9v111_write(c, MT9V111_R01_IFP, MT9V111_IFP_RA5_HPAN,
> + MT9V111_IFP_DECIMATION_FREEZE);
> + if (ret)
> + return ret;
> +
> + ret = mt9v111_write(c, MT9V111_R01_IFP, MT9V111_IFP_RA8_VPAN,
> + MT9V111_IFP_DECIMATION_FREEZE);
> + if (ret)
> + return ret;
> +
> + ret = mt9v111_write(c, MT9V111_R01_IFP, MT9V111_IFP_RA6_HZOOM,
> + MT9V111_IFP_DECIMATION_FREEZE |
> + MT9V111_PIXEL_ARRAY_WIDTH);
> + if (ret)
> + return ret;
> +
> + ret = mt9v111_write(c, MT9V111_R01_IFP, MT9V111_IFP_RA9_VZOOM,
> + MT9V111_IFP_DECIMATION_FREEZE |
> + MT9V111_PIXEL_ARRAY_HEIGHT);
> + if (ret)
> + return ret;
> +
> + ret = mt9v111_write(c, MT9V111_R01_IFP, MT9V111_IFP_RA7_HOUT,
> + MT9V111_IFP_DECIMATION_FREEZE |
> + mt9v111->fmt.width);
> + if (ret)
> + return ret;
> +
> + ret = mt9v111_write(c, MT9V111_R01_IFP, MT9V111_IFP_RAA_VOUT,
> + mt9v111->fmt.height);
> + if (ret)
> + return ret;
> +
> + /* Update blankings to match the programmed frame rate. */
> + ret = mt9v111_update(c, MT9V111_R01_CORE, MT9V111_CORE_R05_HBLANK,
> + MT9V111_CORE_R05_MAX_HBLANK,
> + mt9v111->hblank->val);
> + if (ret)
> + return ret;
> +
> + ret = mt9v111_update(c, MT9V111_R01_CORE, MT9V111_CORE_R06_VBLANK,
> + MT9V111_CORE_R06_MAX_VBLANK,
> + mt9v111->vblank->val);
> + if (ret)
> + return ret;
> +
> + /*
> + * Set pixel integration time to the whole frame time.
> + * This value controls the the shutter delay when running with AE
> + * disabled. If longer than frame time, it affects the output
> + * frame rate.
> + */
> + ret = mt9v111_write(c, MT9V111_R01_CORE, MT9V111_CORE_R09_PIXEL_INT,
> + MT9V111_PIXEL_ARRAY_HEIGHT);

return mt9v111_write(...);

> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +/* --- V4L2 subdev operations --- */
> +
> +static int mt9v111_s_power(struct v4l2_subdev *sd, int on)

Using runtime PM would be nicer. See e.g. the smiapp driver for an example.

This could be done as a separate change later on as well.

> +{
> + struct mt9v111_dev *mt9v111 = sd_to_mt9v111(sd);
> + int pwr_count;
> + int ret = 0;
> +
> + mutex_lock(&mt9v111->pwr_mutex);
> +
> + /*
> + * Make sure we're transitioning from 0 to 1, or viceversa, only
> + * before actually changing the power state.
> + */
> + pwr_count = mt9v111->pwr_count;
> + pwr_count += on ? 1 : -1;
> + if (pwr_count == !!on) {
> + ret = on ? __mt9v111_power_on(sd) :
> + __mt9v111_power_off(sd);
> + if (!ret)
> + /* All went well, updated power counter. */
> + mt9v111->pwr_count = pwr_count;
> +
> + mutex_unlock(&mt9v111->pwr_mutex);
> +
> + return ret;
> + }
> +
> + /*
> + * Update power counter to keep track of how many nested calls we
> + * received.
> + */
> + WARN_ON(pwr_count < 0 || pwr_count > 1);
> + mt9v111->pwr_count = pwr_count;
> +
> + mutex_unlock(&mt9v111->pwr_mutex);
> +
> + return ret;
> +}
> +
> +static int mt9v111_s_stream(struct v4l2_subdev *subdev, int enable)
> +{
> + struct mt9v111_dev *mt9v111 = sd_to_mt9v111(subdev);
> + int ret;
> +
> + mutex_lock(&mt9v111->stream_mutex);
> +
> + if (mt9v111->streaming == enable) {
> + mutex_unlock(&mt9v111->stream_mutex);
> + return 0;
> + }
> +
> + ret = mt9v111_s_power(subdev, enable);
> + if (ret)
> + goto error_unlock;
> +
> + if (enable && mt9v111->pending) {
> + ret = mt9v111_hw_config(mt9v111);
> + if (ret)
> + goto error_unlock;
> +
> + /*
> + * No need to update control here as far as only H/VBLANK are
> + * supported and immediately programmed to registers in .s_ctrl
> + */
> +
> + mt9v111->pending = false;
> + }
> +
> + mt9v111->streaming = enable ? true : false;
> + mutex_unlock(&mt9v111->stream_mutex);
> +
> + return 0;
> +
> +error_unlock:
> + mutex_unlock(&mt9v111->stream_mutex);
> +
> + return ret;
> +}
> +
> +static int mt9v111_s_frame_interval(struct v4l2_subdev *sd,
> + struct v4l2_subdev_frame_interval *ival)
> +{
> + struct mt9v111_dev *mt9v111 = sd_to_mt9v111(sd);
> + struct v4l2_fract *tpf = &ival->interval;
> + unsigned int fps = tpf->numerator ?
> + tpf->denominator / tpf->numerator :
> + tpf->denominator;
> + unsigned int max_fps;
> +
> + mutex_lock(&mt9v111->stream_mutex);
> + if (mt9v111->streaming) {
> + mutex_unlock(&mt9v111->stream_mutex);
> + return -EBUSY;
> + }
> + mutex_unlock(&mt9v111->stream_mutex);
> +
> + if (mt9v111->fps == fps)
> + return 0;
> +
> + /* Make sure frame rate/image sizes constraints are respected. */
> + if (mt9v111->fmt.width < QVGA_WIDTH &&
> + mt9v111->fmt.height < QVGA_HEIGHT)
> + max_fps = 90;
> + else if (mt9v111->fmt.width < CIF_WIDTH &&
> + mt9v111->fmt.height < CIF_HEIGHT)
> + max_fps = 60;
> + else
> + max_fps = mt9v111->sysclk <
> + DIV_ROUND_CLOSEST(MT9V111_MAX_CLKIN, 2) ? 15 :
> + 30;
> +
> + if (fps > max_fps)
> + return -EINVAL;
> +
> + mt9v111_calc_frame_rate(mt9v111, tpf);
> +
> + mt9v111->fps = fps;
> + mt9v111->pending = true;

I think you'd need to keep the mutex until here.

> +
> + return 0;
> +}
> +
> +static int mt9v111_g_frame_interval(struct v4l2_subdev *sd,
> + struct v4l2_subdev_frame_interval *ival)
> +{
> + struct mt9v111_dev *mt9v111 = sd_to_mt9v111(sd);
> + struct v4l2_fract *tpf = &ival->interval;
> +
> + tpf->numerator = 1;
> + tpf->denominator = mt9v111->fps;

Same here --- access to fps is serialised by the mutex.

> +
> + return 0;
> +}
> +
> +static struct v4l2_mbus_framefmt *__mt9v111_get_pad_format(
> + struct mt9v111_dev *mt9v111,
> + struct v4l2_subdev_pad_config *cfg,
> + unsigned int pad,
> + enum v4l2_subdev_format_whence which)
> +{
> + switch (which) {
> + case V4L2_SUBDEV_FORMAT_TRY:
> +#ifdef CONFIG_MEDIA_CONTROLLER
> + return v4l2_subdev_get_try_format(&mt9v111->sd, cfg, pad);
> +#else
> + return &cfg->try_fmt;
> +#endif
> + case V4L2_SUBDEV_FORMAT_ACTIVE:
> + return &mt9v111->fmt;
> + default:
> + return NULL;
> + }
> +}
> +
> +static int mt9v111_enum_mbus_code(struct v4l2_subdev *subdev,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_mbus_code_enum *code)
> +{
> + if (code->pad || code->index > ARRAY_SIZE(mt9v111_formats) - 1)
> + return -EINVAL;
> +
> + code->code = mt9v111_formats[code->index].code;
> +
> + return 0;
> +}
> +
> +static int mt9v111_enum_frame_interval(struct v4l2_subdev *sd,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_frame_interval_enum *fie)
> +{
> + unsigned int i;
> +
> + if (fie->pad || fie->index >= ARRAY_SIZE(mt9v111_frame_intervals))
> + return -EINVAL;
> +
> + for (i = 0; i < ARRAY_SIZE(mt9v111_frame_sizes); i++)
> + if (fie->width == mt9v111_frame_sizes[i].width &&
> + fie->height == mt9v111_frame_sizes[i].height)
> + break;
> +
> + if (i == ARRAY_SIZE(mt9v111_frame_sizes))
> + return -EINVAL;
> +
> + fie->interval.numerator = 1;
> + fie->interval.denominator = mt9v111_frame_intervals[fie->index];
> +
> + return 0;
> +}
> +
> +static int mt9v111_enum_frame_size(struct v4l2_subdev *subdev,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_frame_size_enum *fse)
> +{
> + if (fse->pad || fse->index > ARRAY_SIZE(mt9v111_frame_sizes))
> + return -EINVAL;
> +
> + fse->min_width = mt9v111_frame_sizes[fse->index].width;
> + fse->max_width = mt9v111_frame_sizes[fse->index].width;
> + fse->min_height = mt9v111_frame_sizes[fse->index].height;
> + fse->max_height = mt9v111_frame_sizes[fse->index].height;
> +
> + return 0;
> +}
> +
> +static int mt9v111_get_format(struct v4l2_subdev *subdev,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_format *format)
> +{
> + struct mt9v111_dev *mt9v111 = sd_to_mt9v111(subdev);
> +
> + if (format->pad)
> + return -EINVAL;
> +
> + format->format = *__mt9v111_get_pad_format(mt9v111, cfg, format->pad,
> + format->which);

Ditto.

> + return 0;
> +}
> +
> +static int mt9v111_set_format(struct v4l2_subdev *subdev,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_format *format)
> +{
> + struct mt9v111_dev *mt9v111 = sd_to_mt9v111(subdev);
> + struct v4l2_mbus_framefmt new_fmt;
> + struct v4l2_mbus_framefmt *__fmt;
> + unsigned int best_fit = ~0L;
> + unsigned int idx;
> + unsigned int i;
> +
> + mutex_lock(&mt9v111->stream_mutex);
> + if (mt9v111->streaming) {
> + mutex_unlock(&mt9v111->stream_mutex);
> + return -EBUSY;
> + }
> + mutex_unlock(&mt9v111->stream_mutex);
> +
> + if (format->pad)
> + return -EINVAL;
> +
> + /* Update mbus format code and sizes. */
> + for (i = 0; i < ARRAY_SIZE(mt9v111_formats); i++) {
> + if (format->format.code == mt9v111_formats[i].code) {
> + new_fmt.code = mt9v111_formats[i].code;
> + break;
> + }
> + }
> + if (i == ARRAY_SIZE(mt9v111_formats))
> + new_fmt.code = mt9v111_formats[0].code;
> +
> + for (i = 0; i < ARRAY_SIZE(mt9v111_frame_sizes); i++) {
> + unsigned int fit = abs(mt9v111_frame_sizes[i].width -
> + format->format.width) +
> + abs(mt9v111_frame_sizes[i].height -
> + format->format.height);
> + if (fit < best_fit) {
> + best_fit = fit;
> + idx = i;
> +
> + if (fit == 0)
> + break;
> + }
> + }
> + new_fmt.width = mt9v111_frame_sizes[idx].width;
> + new_fmt.height = mt9v111_frame_sizes[idx].height;
> +
> + /* Update the device (or pad) format if it has changed. */
> + __fmt = __mt9v111_get_pad_format(mt9v111, cfg, format->pad,
> + format->which);
> +
> + /* Format hasn't changed, stop here. */
> + if (__fmt->code == new_fmt.code &&
> + __fmt->width == new_fmt.width &&
> + __fmt->height == new_fmt.height)
> + goto done;
> +
> + /* Update the format and sizes, then mark changes as pending. */
> + __fmt->code = new_fmt.code;
> + __fmt->width = new_fmt.width;
> + __fmt->height = new_fmt.height;
> +
> + if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE)
> + mt9v111->pending = true;
> +
> + dev_info(mt9v111->dev, "%s: mbus_code: %x - (%ux%u)\n",
> + __func__, __fmt->code, __fmt->width, __fmt->height);
> +
> +done:
> + format->format = *__fmt;

Same here.

> +
> + return 0;
> +}
> +
> +static const struct v4l2_subdev_core_ops mt9v111_core_ops = {
> + .s_power = mt9v111_s_power,
> +};
> +
> +static const struct v4l2_subdev_video_ops mt9v111_video_ops = {
> + .s_stream = mt9v111_s_stream,
> + .s_frame_interval = mt9v111_s_frame_interval,
> + .g_frame_interval = mt9v111_g_frame_interval,
> +};
> +
> +static const struct v4l2_subdev_pad_ops mt9v111_pad_ops = {
> + .enum_mbus_code = mt9v111_enum_mbus_code,
> + .enum_frame_size = mt9v111_enum_frame_size,
> + .enum_frame_interval = mt9v111_enum_frame_interval,
> + .get_fmt = mt9v111_get_format,
> + .set_fmt = mt9v111_set_format,
> +};
> +
> +static const struct v4l2_subdev_ops mt9v111_ops = {
> + .core = &mt9v111_core_ops,
> + .video = &mt9v111_video_ops,
> + .pad = &mt9v111_pad_ops,
> +};
> +
> +#ifdef CONFIG_MEDIA_CONTROLLER
> +static const struct media_entity_operations mt9v111_subdev_entity_ops = {
> + .link_validate = v4l2_subdev_link_validate,
> +};
> +
> +static int mt9v111_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
> +{
> + struct mt9v111_dev *mt9v111 = sd_to_mt9v111(sd);
> + struct v4l2_mbus_framefmt *__fmt =
> + v4l2_subdev_get_try_format(sd, fh->pad, 0);
> +
> + /* Initialize try format: copy the device format. */
> + *__fmt = mt9v111->fmt;

Please use default configuration, not the current configuration. If this is
all you need in open, I'd suggest to implement the init_cfg pad op instead.

> +
> + return 0;
> +}
> +
> +static const struct v4l2_subdev_internal_ops mt9v111_internal_ops = {
> + .open = mt9v111_open,
> +};
> +#endif
> +
> +/* --- V4L2 ctrl --- */
> +static int mt9v111_s_ctrl(struct v4l2_ctrl *ctrl)
> +{
> + struct mt9v111_dev *mt9v111 = container_of(ctrl->handler,
> + struct mt9v111_dev,
> + ctrls);
> + int ret = 0;

-EINVAL? That way any controls not handled by the function won't be missed.

> +
> + mutex_lock(&mt9v111->pwr_mutex);
> + /*
> + * If sensor is powered down, just cache new control values,
> + * no actual register access.
> + */
> + if (!mt9v111->pwr_count) {
> + mutex_unlock(&mt9v111->pwr_mutex);
> + return 0;
> + }
> + mutex_unlock(&mt9v111->pwr_mutex);
> +
> + switch (ctrl->id) {
> + case V4L2_CID_HBLANK:
> + ret = mt9v111_update(mt9v111->client, MT9V111_R01_CORE,
> + MT9V111_CORE_R05_HBLANK,
> + MT9V111_CORE_R05_MAX_HBLANK,
> + mt9v111->hblank->val);
> + break;
> + case V4L2_CID_VBLANK:
> + ret = mt9v111_update(mt9v111->client, MT9V111_R01_CORE,
> + MT9V111_CORE_R06_VBLANK,
> + MT9V111_CORE_R06_MAX_VBLANK,
> + mt9v111->vblank->val);
> + break;
> + }
> +
> + return ret;
> +}
> +
> +static const struct v4l2_ctrl_ops mt9v111_ctrl_ops = {
> + .s_ctrl = mt9v111_s_ctrl,
> +};
> +
> +static int mt9v111_chip_probe(struct mt9v111_dev *mt9v111)
> +{
> + int ret;
> + u16 val;
> +
> + ret = __mt9v111_power_on(&mt9v111->sd);
> + if (ret)
> + return ret;
> +
> + ret = mt9v111_read(mt9v111->client, MT9V111_R01_CORE,
> + MT9V111_CORE_RFF_CHIP_VER, &val);
> + if (ret)
> + return ret;

Power off the device on failure? Same below.

> +
> + if ((val >> 8) != MT9V111_CHIP_ID_HIGH &&
> + (val & 0xff) != MT9V111_CHIP_ID_LOW) {
> + dev_err(mt9v111->dev,
> + "Unable to identify MT9V111 chip: 0x%2x%2x\n",
> + val >> 8, val & 0xff);
> + return ret;
> + }
> +
> + ret = __mt9v111_power_off(&mt9v111->sd);
> + if (ret)
> + return ret;
> +
> + dev_info(mt9v111->dev, "Chip identified: 0x%2x%2x\n",
> + val >> 8, val & 0xff);
> +
> + return 0;
> +}
> +
> +static int mt9v111_probe(struct i2c_client *client)
> +{
> + struct mt9v111_dev *mt9v111;
> + struct v4l2_fract tpf;
> + int ret;
> +
> + mt9v111 = devm_kzalloc(&client->dev, sizeof(*mt9v111), GFP_KERNEL);
> + if (!mt9v111)
> + return -ENOMEM;
> +
> + mt9v111->dev = &client->dev;
> + mt9v111->client = client;
> +
> + mt9v111->clk = devm_clk_get(&client->dev, NULL);
> + if (IS_ERR(mt9v111->clk))
> + return PTR_ERR(mt9v111->clk);
> +
> + mt9v111->sysclk = clk_get_rate(mt9v111->clk);
> + if (mt9v111->sysclk > MT9V111_MAX_CLKIN)
> + return -EINVAL;
> +
> + mt9v111->oe = devm_gpiod_get_optional(&client->dev, "enable",
> + GPIOD_OUT_LOW);
> + if (IS_ERR(mt9v111->oe)) {
> + dev_err(&client->dev, "Unable to get GPIO \"enable\": %ld\n",
> + PTR_ERR(mt9v111->oe));
> + return PTR_ERR(mt9v111->oe);
> + }
> +
> + mt9v111->standby = devm_gpiod_get_optional(&client->dev, "standby",
> + GPIOD_OUT_HIGH);
> + if (IS_ERR(mt9v111->standby)) {
> + dev_err(&client->dev, "Unable to get GPIO \"standby\": %ld\n",
> + PTR_ERR(mt9v111->standby));
> + return PTR_ERR(mt9v111->standby);
> + }
> +
> + mt9v111->reset = devm_gpiod_get_optional(&client->dev, "reset",
> + GPIOD_OUT_LOW);
> + if (IS_ERR(mt9v111->reset)) {
> + dev_err(&client->dev, "Unable to get GPIO \"reset\": %ld\n",
> + PTR_ERR(mt9v111->reset));
> + return PTR_ERR(mt9v111->reset);
> + }
> +
> + mutex_init(&mt9v111->pwr_mutex);
> + mutex_init(&mt9v111->stream_mutex);
> + spin_lock_init(&mt9v111->addr_lock);
> +
> + v4l2_ctrl_handler_init(&mt9v111->ctrls, 3);
> +
> + mt9v111->hblank = v4l2_ctrl_new_std(&mt9v111->ctrls, &mt9v111_ctrl_ops,
> + V4L2_CID_HBLANK,
> + MT9V111_CORE_R05_MIN_HBLANK,
> + MT9V111_CORE_R05_MAX_HBLANK, 1,
> + MT9V111_CORE_R05_DEF_HBLANK);
> + if (IS_ERR_OR_NULL(mt9v111->hblank)) {
> + ret = PTR_ERR(mt9v111->hblank);
> + goto error_free_ctrls;
> + }
> +
> + mt9v111->vblank = v4l2_ctrl_new_std(&mt9v111->ctrls, &mt9v111_ctrl_ops,
> + V4L2_CID_VBLANK,
> + MT9V111_CORE_R06_MIN_VBLANK,
> + MT9V111_CORE_R06_MAX_VBLANK, 1,
> + MT9V111_CORE_R06_DEF_VBLANK);
> + if (IS_ERR_OR_NULL(mt9v111->vblank)) {
> + ret = PTR_ERR(mt9v111->vblank);
> + goto error_free_ctrls;
> + }
> +
> + /* PIXEL_RATE is fixed: just expose it to user space. */
> + v4l2_ctrl_new_std(&mt9v111->ctrls, &mt9v111_ctrl_ops,
> + V4L2_CID_PIXEL_RATE, 0,
> + DIV_ROUND_CLOSEST(mt9v111->sysclk, 2), 1,
> + DIV_ROUND_CLOSEST(mt9v111->sysclk, 2));
> +
> + mt9v111->sd.ctrl_handler = &mt9v111->ctrls;
> +
> + /* Start with default configuration: 640x480 UYVY. */
> + mt9v111->fmt.width = 640;
> + mt9v111->fmt.height = 480;
> + mt9v111->fmt.code = MEDIA_BUS_FMT_UYVY8_2X8;
> +
> + /* These are fixed for all supported formats. */
> + mt9v111->fmt.field = V4L2_FIELD_NONE;
> + mt9v111->fmt.colorspace = V4L2_COLORSPACE_SRGB;
> + mt9v111->fmt.ycbcr_enc = V4L2_YCBCR_ENC_601;
> + mt9v111->fmt.quantization = V4L2_QUANTIZATION_LIM_RANGE;
> + mt9v111->fmt.xfer_func = V4L2_XFER_FUNC_SRGB;
> +
> + /* Re-calculate blankings for 640x480@15fps. */
> + mt9v111->fps = 15;
> + tpf.numerator = 1;
> + tpf.denominator = mt9v111->fps;
> + ret = mt9v111_calc_frame_rate(mt9v111, &tpf);
> + if (ret)
> + goto error_free_ctrls;
> +
> + mt9v111->pwr_count = 0;
> + mt9v111->addr_space = MT9V111_R01_IFP;
> + mt9v111->pending = true;
> +
> + v4l2_i2c_subdev_init(&mt9v111->sd, client, &mt9v111_ops);
> +
> +#ifdef CONFIG_MEDIA_CONTROLLER
> + mt9v111->sd.internal_ops = &mt9v111_internal_ops;
> + mt9v111->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> + mt9v111->sd.entity.ops = &mt9v111_subdev_entity_ops;
> + mt9v111->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
> +
> + mt9v111->pad.flags = MEDIA_PAD_FL_SOURCE;
> + ret = media_entity_pads_init(&mt9v111->sd.entity, 1, &mt9v111->pad);
> + if (ret)
> + goto error_free_ctrls;
> +#endif
> +
> + ret = mt9v111_chip_probe(mt9v111);
> + if (ret)
> + goto error_free_ctrls;
> +
> + ret = v4l2_async_register_subdev(&mt9v111->sd);
> + if (ret)
> + goto error_free_ctrls;
> +
> + return 0;
> +
> +error_free_ctrls:
> + v4l2_ctrl_handler_free(&mt9v111->ctrls);
> +
> +#ifdef CONFIG_MEDIA_CONTROLLER
> + media_entity_cleanup(&mt9v111->sd.entity);
> +#endif
> +
> + mutex_destroy(&mt9v111->pwr_mutex);
> + mutex_destroy(&mt9v111->stream_mutex);
> +
> + return ret;
> +}
> +
> +static int mt9v111_remove(struct i2c_client *client)
> +{
> + struct v4l2_subdev *sd = i2c_get_clientdata(client);
> + struct mt9v111_dev *mt9v111 = sd_to_mt9v111(sd);
> +
> + v4l2_async_unregister_subdev(sd);
> +
> + v4l2_ctrl_handler_free(&mt9v111->ctrls);
> +
> +#ifdef CONFIG_MEDIA_CONTROLLER
> + media_entity_cleanup(&sd->entity);
> +#endif
> +
> + mutex_destroy(&mt9v111->pwr_mutex);
> + mutex_destroy(&mt9v111->stream_mutex);
> +
> + devm_gpiod_put(mt9v111->dev, mt9v111->oe);
> + devm_gpiod_put(mt9v111->dev, mt9v111->standby);
> + devm_gpiod_put(mt9v111->dev, mt9v111->reset);
> +
> + devm_clk_put(mt9v111->dev, mt9v111->clk);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id mt9v111_of_match[] = {
> + { .compatible = "aptina,mt9v111", },
> + { /* sentinel */ },
> +};
> +
> +static struct i2c_driver mt9v111_driver = {
> + .driver = {
> + .name = "mt9v111",
> + .of_match_table = of_match_ptr(mt9v111_of_match),

Please assign this without of_match_ptr().

> + },
> + .probe_new = mt9v111_probe,
> + .remove = mt9v111_remove,
> +};
> +
> +module_i2c_driver(mt9v111_driver);
> +
> +MODULE_DESCRIPTION("V4L2 sensor driver for Aptina MT9V111");
> +MODULE_AUTHOR("Jacopo Mondi <jacopo@jmondi.org>");
> +MODULE_LICENSE("GPL v2");

--
Kind regards,

Sakari Ailus
e-mail: sakari.ailus@iki.fi

\
 
 \ /
  Last update: 2018-07-23 16:29    [W:0.169 / U:0.344 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site