lkml.org 
[lkml]   [2018]   [Jul]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 08/35] media: dt-bindings: media: qcom,camss: Unify the clock names
Date
Use more logical clock names - similar to the names in documentation.
This will allow better handling of the clocks in the driver when support
for more hardware versions is added - equivalent clocks on different
hardware versions will have the same name.

CC: Rob Herring <robh+dt@kernel.org>
CC: Mark Rutland <mark.rutland@arm.com>
CC: devicetree@vger.kernel.org
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
---
.../devicetree/bindings/media/qcom,camss.txt | 24 +++++++++++-----------
1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/qcom,camss.txt b/Documentation/devicetree/bindings/media/qcom,camss.txt
index cadeceb..032e8ed 100644
--- a/Documentation/devicetree/bindings/media/qcom,camss.txt
+++ b/Documentation/devicetree/bindings/media/qcom,camss.txt
@@ -53,7 +53,7 @@ Qualcomm Camera Subsystem
Usage: required
Value type: <stringlist>
Definition: Should contain the following entries:
- - "camss_top_ahb"
+ - "top_ahb"
- "ispif_ahb"
- "csiphy0_timer"
- "csiphy1_timer"
@@ -67,11 +67,11 @@ Qualcomm Camera Subsystem
- "csi1_phy"
- "csi1_pix"
- "csi1_rdi"
- - "camss_ahb"
- - "camss_vfe_vfe"
- - "camss_csi_vfe"
- - "iface"
- - "bus"
+ - "ahb"
+ - "vfe0"
+ - "csi_vfe0"
+ - "vfe_ahb"
+ - "vfe_axi"
- vdda-supply:
Usage: required
Value type: <phandle>
@@ -161,7 +161,7 @@ Qualcomm Camera Subsystem
<&gcc GCC_CAMSS_CSI_VFE0_CLK>,
<&gcc GCC_CAMSS_VFE_AHB_CLK>,
<&gcc GCC_CAMSS_VFE_AXI_CLK>;
- clock-names = "camss_top_ahb",
+ clock-names = "top_ahb",
"ispif_ahb",
"csiphy0_timer",
"csiphy1_timer",
@@ -175,11 +175,11 @@ Qualcomm Camera Subsystem
"csi1_phy",
"csi1_pix",
"csi1_rdi",
- "camss_ahb",
- "camss_vfe_vfe",
- "camss_csi_vfe",
- "iface",
- "bus";
+ "ahb",
+ "vfe0",
+ "csi_vfe0",
+ "vfe_ahb",
+ "vfe_axi";
vdda-supply = <&pm8916_l2>;
iommus = <&apps_iommu 3>;
ports {
--
2.7.4
\
 
 \ /
  Last update: 2018-07-23 13:08    [W:0.121 / U:1.892 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site