lkml.org 
[lkml]   [2018]   [Jul]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] apalis_t30: fix can2
From
Date
On 06/25/2018 09:59 AM, Marcel Ziswiler wrote:
> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
>
> CAN2 currently fails on probe as follows:
>
> mcp251x spi1.1: Probe failed, err=19
>
> Fix this by enabling input on pin mux of resp. SPI4 pins.
>
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

I can take this via the linux-can tree. Any acks from the DT people?

Marc

>
> ---
>
> arch/arm/boot/dts/tegra30-apalis.dtsi | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
> index d1d21ec2a844..9ff6aafd72b3 100644
> --- a/arch/arm/boot/dts/tegra30-apalis.dtsi
> +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
> @@ -118,6 +118,7 @@
> nvidia,function = "spi4";
> nvidia,pull = <TEGRA_PIN_PULL_NONE>;
> nvidia,tristate = <TEGRA_PIN_DISABLE>;
> + nvidia,enable-input = <TEGRA_PIN_ENABLE>;
> };
> /* CAN_INT2 */
> spi2_cs2_n_pw3 {
>


--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |

[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-07-23 11:48    [W:0.076 / U:0.916 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site