lkml.org 
[lkml]   [2018]   [Jul]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] MIPS: jz4740: Bump zload address
Hi Paul,

On Sun, Jul 08, 2018 at 05:07:12PM +0200, Paul Cercueil wrote:
> Having the zload address at 0x8060.0000 means the size of the
> uncompressed kernel cannot be bigger than around 6 MiB, as it is
> deflated at address 0x8001.0000.
>
> This limit is too small; a kernel with some built-in drivers and things
> like debugfs enabled will already be over 6 MiB in size, and so will
> fail to extract properly.
>
> To fix this, we bump the zload address from 0x8060.0000 to 0x8100.0000.
>
> This is fine, as all the boards featuring Ingenic JZ SoCs have at least
> 32 MiB of RAM, and use u-boot or compatible bootloaders which won't
> hardcode the load address but read it from the uImage's header.
>
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> ---
> arch/mips/jz4740/Platform | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)

Thanks - applied to mips-next for 4.19 (and tested on Ci20).

Paul

\
 
 \ /
  Last update: 2018-07-24 02:49    [W:0.032 / U:1.568 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site