lkml.org 
[lkml]   [2018]   [Jul]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] PCI: NVMe device specific reset quirk
On Mon, 23 Jul 2018 16:45:08 -0600
Keith Busch <keith.busch@intel.com> wrote:

> On Mon, Jul 23, 2018 at 04:24:31PM -0600, Alex Williamson wrote:
> > Take advantage of NVMe devices using a standard interface to quiesce
> > the controller prior to reset, including device specific delays before
> > and after that reset. This resolves several NVMe device assignment
> > scenarios with two different vendors. The Intel DC P3700 controller
> > has been shown to only work as a VM boot device on the initial VM
> > startup, failing after reset or reboot, and also fails to initialize
> > after hot-plug into a VM. Adding a delay after FLR resolves these
> > cases. The Samsung SM961/PM961 (960 EVO) sometimes fails to return
> > from FLR with the PCI config space reading back as -1. A reproducible
> > instance of this behavior is resolved by clearing the enable bit in
> > the configuration register and waiting for the ready status to clear
> > (disabling the NVMe controller) prior to FLR.
> >
> > As all NVMe devices make use of this standard interface and the NVMe
> > specification also requires PCIe FLR support, we can apply this quirk
> > to all devices with matching class code.
>
> Shouldn't this go in the nvme driver's reset_prepare/reset_done callbacks?

The scenario I'm trying to fix is device assignment, the nvme driver
isn't in play there. The device is bound to the vfio-pci driver at the
time of these resets. Thanks,

Alex

\
 
 \ /
  Last update: 2018-07-24 01:09    [W:0.039 / U:2.428 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site