lkml.org 
[lkml]   [2018]   [Jul]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v1 4/9] scsi: ufs: add option to change default UFS power management level
From
Date
On 7/11/2018 4:20 PM, Adrian Hunter wrote:
> On 06/07/18 15:30, Asutosh Das wrote:
>> From: Subhash Jadavani <subhashj@codeaurora.org>
>>
>> UFS device and link can be put in multiple different low power modes hence
>> UFS driver supports multiple different low power modes. By default UFS
>> driver selects the default (optimal) low power mode (which gives moderate
>> power savings and have relatively less enter and exit latencies) but
>> we might have to tune this default power mode for different chipset
>> platforms to meet the low power requirements/goals. Hence this patch
>> adds option to change default UFS low power mode (level).
>>
>> Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
>> Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>
>> Signed-off-by: Can Guo <cang@codeaurora.org>
>> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
>> ---
>> .../devicetree/bindings/ufs/ufshcd-pltfrm.txt | 11 ++++++++
>> drivers/scsi/ufs/ufshcd-pltfrm.c | 14 +++++++++++
>> drivers/scsi/ufs/ufshcd.c | 29 +++++++++++++++-------
>> drivers/scsi/ufs/ufshcd.h | 4 +--
>> 4 files changed, 47 insertions(+), 11 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
>> index c39dfef..f564d9a 100644
>> --- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
>> +++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
>> @@ -38,6 +38,15 @@ Optional properties:
>> defined or a value in the array is "0" then it is assumed
>> that the frequency is set by the parent clock or a
>> fixed rate clock source.
>> +- rpm-level : UFS Runtime power management level. Following PM levels are supported:
>> + 0 - Both UFS device and Link in active state (Highest power consumption)
>> + 1 - UFS device in active state but Link in Hibern8 state
>> + 2 - UFS device in Sleep state but Link in active state
>> + 3 - UFS device in Sleep state and Link in hibern8 state (default PM level)
>> + 4 - UFS device in Power-down state and Link in Hibern8 state
>> + 5 - UFS device in Power-down state and Link in OFF state (Lowest power consumption)
>> +- spm-level : UFS System power management level. Allowed PM levels are same as rpm-level.
>> +
>> -lanes-per-direction : number of lanes available per direction - either 1 or 2.
>> Note that it is assume same number of lanes is used both
>> directions at once. If not specified, default is 2 lanes per direction.
>> @@ -66,4 +75,6 @@ Example:
>> freq-table-hz = <100000000 200000000>, <0 0>, <0 0>;
>> phys = <&ufsphy1>;
>> phy-names = "ufsphy";
>> + rpm-level = <3>;
>> + spm-level = <5>;
>> };
>> diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/scsi/ufs/ufshcd-pltfrm.c
>> index e82bde0..7dba799 100644
>> --- a/drivers/scsi/ufs/ufshcd-pltfrm.c
>> +++ b/drivers/scsi/ufs/ufshcd-pltfrm.c
>> @@ -221,6 +221,19 @@ static int ufshcd_parse_regulator_info(struct ufs_hba *hba)
>> return err;
>> }
>>
>> +static void ufshcd_parse_pm_levels(struct ufs_hba *hba)
>> +{
>> + struct device *dev = hba->dev;
>> + struct device_node *np = dev->of_node;
>> +
>> + if (np) {
>> + if (of_property_read_u32(np, "rpm-level", &hba->rpm_lvl))
>> + hba->rpm_lvl = -1;
>> + if (of_property_read_u32(np, "spm-level", &hba->spm_lvl))
>> + hba->spm_lvl = -1;
>
> These are generically useful to all UFSHC drivers, so they should be
> device_property_read_u32() and they should be read for all drivers not just
> pltfrm i.e. move this code into ufshcd.c
>
>> + }
>> +}
>> +
>> #ifdef CONFIG_PM
>> /**
>> * ufshcd_pltfrm_suspend - suspend power management function
>> @@ -340,6 +353,7 @@ int ufshcd_pltfrm_init(struct platform_device *pdev,
>> goto dealloc_host;
>> }
>>
>> + ufshcd_parse_pm_levels(hba);
>> pm_runtime_set_active(&pdev->dev);
>> pm_runtime_enable(&pdev->dev);
>>
>> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
>> index b03f3ea..e950204 100644
>> --- a/drivers/scsi/ufs/ufshcd.c
>> +++ b/drivers/scsi/ufs/ufshcd.c
>> @@ -192,6 +192,14 @@ struct ufs_pm_lvl_states ufs_pm_lvl_states[] = {
>> return UFS_PM_LVL_0;
>> }
>>
>> +static inline bool ufshcd_is_valid_pm_lvl(int lvl)
>> +{
>> + if (lvl >= 0 && lvl < ARRAY_SIZE(ufs_pm_lvl_states))
>> + return true;
>> + else
>> + return false;
>> +}
>> +
>> static struct ufs_dev_fix ufs_fixups[] = {
>> /* UFS cards deviations table */
>> UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
>> @@ -8051,16 +8059,19 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
>> }
>>
>> /*
>> - * Set the default power management level for runtime and system PM.
>> - * Default power saving mode is to keep UFS link in Hibern8 state
>> - * and UFS device in sleep state.
>> + * If rpm_lvl and and spm_lvl are not already set to valid levels,
>> + * set the default power management level for UFS runtime and system
>> + * suspend. Default power saving mode selected is keeping UFS link in
>> + * Hibern8 state and UFS device in sleep state.
>> */
>> - hba->rpm_lvl = ufs_get_desired_pm_lvl_for_dev_link_state(
>> - UFS_SLEEP_PWR_MODE,
>> - UIC_LINK_HIBERN8_STATE);
>> - hba->spm_lvl = ufs_get_desired_pm_lvl_for_dev_link_state(
>> - UFS_SLEEP_PWR_MODE,
>> - UIC_LINK_HIBERN8_STATE);
>> + if (!ufshcd_is_valid_pm_lvl(hba->rpm_lvl))
>> + hba->rpm_lvl = ufs_get_desired_pm_lvl_for_dev_link_state(
>> + UFS_SLEEP_PWR_MODE,
>> + UIC_LINK_HIBERN8_STATE);
>> + if (!ufshcd_is_valid_pm_lvl(hba->spm_lvl))
>> + hba->spm_lvl = ufs_get_desired_pm_lvl_for_dev_link_state(
>> + UFS_SLEEP_PWR_MODE,
>> + UIC_LINK_HIBERN8_STATE);
>>
>> /* Set the default auto-hiberate idle timer value to 150 ms */
>> if (hba->capabilities & MASK_AUTO_HIBERN8_SUPPORT) {
>> diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
>> index e996a08..a2e1d5c 100644
>> --- a/drivers/scsi/ufs/ufshcd.h
>> +++ b/drivers/scsi/ufs/ufshcd.h
>> @@ -526,9 +526,9 @@ struct ufs_hba {
>> enum ufs_dev_pwr_mode curr_dev_pwr_mode;
>> enum uic_link_state uic_link_state;
>> /* Desired UFS power management level during runtime PM */
>> - enum ufs_pm_level rpm_lvl;
>> + int rpm_lvl;
>> /* Desired UFS power management level during system PM */
>> - enum ufs_pm_level spm_lvl;
>> + int spm_lvl;
>> struct device_attribute rpm_lvl_attr;
>> struct device_attribute spm_lvl_attr;
>> int pm_op_in_progress;
>>
>

Thanks. I'll make the changes and push it in v2.

--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a
Linux Foundation Collaborative Project

\
 
 \ /
  Last update: 2018-07-23 05:10    [W:0.143 / U:0.436 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site