lkml.org 
[lkml]   [2018]   [Jul]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v4 35/35] mtd: rawnand: allocate dynamically ONFI parameters during detection
On Fri, 20 Jul 2018 17:15:27 +0200
Miquel Raynal <miquel.raynal@bootlin.com> wrote:

> Now that it is possible to do dynamic allocations during the
> identification phase, convert the onfi_params structure (which is only
> needed with ONFI compliant chips) into a pointer that will be allocated
> only if needed.
>
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> ---
> drivers/mtd/nand/raw/nand_base.c | 54 +++++++++++++++++++++++--------------
> drivers/mtd/nand/raw/nand_micron.c | 6 ++---
> drivers/mtd/nand/raw/nand_timings.c | 12 ++++-----
> include/linux/mtd/rawnand.h | 6 ++---
> 4 files changed, 46 insertions(+), 32 deletions(-)
>
> diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
> index 8645f655e5b0..ed9e2f1578e6 100644
> --- a/drivers/mtd/nand/raw/nand_base.c
> +++ b/drivers/mtd/nand/raw/nand_base.c
> @@ -5151,6 +5151,8 @@ static int nand_flash_detect_onfi(struct nand_chip *chip)
> {
> struct mtd_info *mtd = nand_to_mtd(chip);
> struct nand_onfi_params *p;
> + struct onfi_params *onfi;
> + int onfi_version = 0;
> char id[4];
> int i, ret, val;
>
> @@ -5206,21 +5208,19 @@ static int nand_flash_detect_onfi(struct nand_chip *chip)
> /* Check version */
> val = le16_to_cpu(p->revision);
> if (val & ONFI_VERSION_2_3)
> - chip->parameters.onfi.version = 23;
> + onfi_version = 23;
> else if (val & ONFI_VERSION_2_2)
> - chip->parameters.onfi.version = 22;
> + onfi_version = 22;
> else if (val & ONFI_VERSION_2_1)
> - chip->parameters.onfi.version = 21;
> + onfi_version = 21;
> else if (val & ONFI_VERSION_2_0)
> - chip->parameters.onfi.version = 20;
> + onfi_version = 20;
> else if (val & ONFI_VERSION_1_0)
> - chip->parameters.onfi.version = 10;
> + onfi_version = 10;
>
> - if (!chip->parameters.onfi.version) {
> + if (!onfi_version) {
> pr_info("unsupported ONFI version: %d\n", val);
> goto free_onfi_param_page;
> - } else {
> - ret = 1;
> }
>
> sanitize_string(p->manufacturer, sizeof(p->manufacturer));
> @@ -5257,7 +5257,7 @@ static int nand_flash_detect_onfi(struct nand_chip *chip)
> if (p->ecc_bits != 0xff) {
> chip->ecc_strength_ds = p->ecc_bits;
> chip->ecc_step_ds = 512;
> - } else if (chip->parameters.onfi.version >= 21 &&
> + } else if (onfi_version >= 21 &&
> (le16_to_cpu(p->features) & ONFI_FEATURE_EXT_PARAM_PAGE)) {
>
> /*
> @@ -5284,19 +5284,33 @@ static int nand_flash_detect_onfi(struct nand_chip *chip)
> bitmap_set(chip->parameters.set_feature_list,
> ONFI_FEATURE_ADDR_TIMING_MODE, 1);
> }
> - chip->parameters.onfi.tPROG = le16_to_cpu(p->t_prog);
> - chip->parameters.onfi.tBERS = le16_to_cpu(p->t_bers);
> - chip->parameters.onfi.tR = le16_to_cpu(p->t_r);
> - chip->parameters.onfi.tCCS = le16_to_cpu(p->t_ccs);
> - chip->parameters.onfi.async_timing_mode =
> - le16_to_cpu(p->async_timing_mode);
> - chip->parameters.onfi.vendor_revision =
> - le16_to_cpu(p->vendor_revision);
> - memcpy(chip->parameters.onfi.vendor, p->vendor,
> - sizeof(p->vendor));
>
> + onfi = kzalloc(sizeof(*onfi), GFP_KERNEL);
> + if (!onfi) {
> + ret = -ENOMEM;
> + goto free_model;
> + }
> +
> + onfi->version = onfi_version;
> + onfi->tPROG = le16_to_cpu(p->t_prog);
> + onfi->tBERS = le16_to_cpu(p->t_bers);
> + onfi->tR = le16_to_cpu(p->t_r);
> + onfi->tCCS = le16_to_cpu(p->t_ccs);
> + onfi->async_timing_mode = le16_to_cpu(p->async_timing_mode);
> + onfi->vendor_revision = le16_to_cpu(p->vendor_revision);
> + memcpy(onfi->vendor, p->vendor, sizeof(p->vendor));
> + chip->parameters.onfi = onfi;
> +
> + /* Identification done, free the full ONFI parameter page and exit */
> + kfree(p);
> +
> + return 1;
> +
> +free_model:
> + kfree(chip->parameters.model);
> free_onfi_param_page:
> kfree(p);
> +
> return ret;
> }
>
> @@ -5693,7 +5707,6 @@ static int nand_detect(struct nand_chip *chip, struct nand_flash_dev *type)
> }
> }
>
> - chip->parameters.onfi.version = 0;
> if (!type->name || !type->pagesize) {
> /* Check if the chip is ONFI compliant */
> ret = nand_flash_detect_onfi(chip);
> @@ -6039,6 +6052,7 @@ static int nand_scan_ident(struct mtd_info *mtd, int maxchips,
> static void nand_scan_ident_cleanup(struct nand_chip *chip)
> {
> kfree(chip->parameters.model);
> + kfree(chip->parameters.onfi);
> }
>
> static int nand_set_ecc_soft_ops(struct mtd_info *mtd)
> diff --git a/drivers/mtd/nand/raw/nand_micron.c b/drivers/mtd/nand/raw/nand_micron.c
> index 656947d91841..8466a1740b3b 100644
> --- a/drivers/mtd/nand/raw/nand_micron.c
> +++ b/drivers/mtd/nand/raw/nand_micron.c
> @@ -88,9 +88,9 @@ static int micron_nand_setup_read_retry(struct mtd_info *mtd, int retry_mode)
> static int micron_nand_onfi_init(struct nand_chip *chip)
> {
> struct nand_parameters *p = &chip->parameters;
> - struct nand_onfi_vendor_micron *micron = (void *)p->onfi.vendor;
> + struct nand_onfi_vendor_micron *micron = (void *)p->onfi->vendor;
>
> - if (chip->parameters.onfi.version && p->onfi.vendor_revision) {
> + if (p->onfi && p->onfi->vendor_revision) {

I think p->onfi != NULL guarantees that p->onfi->vendor_revision != 0.
if (p->onfi) should be enough.

Looks good otherwise.

Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

> chip->read_retries = micron->read_retry_options;
> chip->setup_read_retry = micron_nand_setup_read_retry;
> }
> @@ -382,7 +382,7 @@ static int micron_supports_on_die_ecc(struct nand_chip *chip)
> u8 id[5];
> int ret;
>
> - if (!chip->parameters.onfi.version)
> + if (!chip->parameters.onfi)
> return MICRON_ON_DIE_UNSUPPORTED;
>
> if (chip->bits_per_cell != 1)
> diff --git a/drivers/mtd/nand/raw/nand_timings.c b/drivers/mtd/nand/raw/nand_timings.c
> index 9bb599106a31..ebc7b5f76f77 100644
> --- a/drivers/mtd/nand/raw/nand_timings.c
> +++ b/drivers/mtd/nand/raw/nand_timings.c
> @@ -294,6 +294,7 @@ int onfi_fill_data_interface(struct nand_chip *chip,
> int timing_mode)
> {
> struct nand_data_interface *iface = &chip->data_interface;
> + struct onfi_params *onfi = chip->parameters.onfi;
>
> if (type != NAND_SDR_IFACE)
> return -EINVAL;
> @@ -308,17 +309,16 @@ int onfi_fill_data_interface(struct nand_chip *chip,
> * tPROG, tBERS, tR and tCCS.
> * These information are part of the ONFI parameter page.
> */
> - if (chip->parameters.onfi.version) {
> - struct nand_parameters *params = &chip->parameters;
> + if (onfi) {
> struct nand_sdr_timings *timings = &iface->timings.sdr;
>
> /* microseconds -> picoseconds */
> - timings->tPROG_max = 1000000ULL * params->onfi.tPROG;
> - timings->tBERS_max = 1000000ULL * params->onfi.tBERS;
> - timings->tR_max = 1000000ULL * params->onfi.tR;
> + timings->tPROG_max = 1000000ULL * onfi->tPROG;
> + timings->tBERS_max = 1000000ULL * onfi->tBERS;
> + timings->tR_max = 1000000ULL * onfi->tR;
>
> /* nanoseconds -> picoseconds */
> - timings->tCCS_min = 1000UL * params->onfi.tCCS;
> + timings->tCCS_min = 1000UL * onfi->tCCS;
> } else {
> struct nand_sdr_timings *timings = &iface->timings.sdr;
> /*
> diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
> index 5723d940a47d..8074cbd4e3fe 100644
> --- a/include/linux/mtd/rawnand.h
> +++ b/include/linux/mtd/rawnand.h
> @@ -488,7 +488,7 @@ struct nand_parameters {
> DECLARE_BITMAP(get_feature_list, ONFI_FEATURE_NUMBER);
>
> /* ONFI parameters */
> - struct onfi_params onfi;
> + struct onfi_params *onfi;
> };
>
> /* The maximum expected count of bytes in the NAND ID sequence */
> @@ -1618,10 +1618,10 @@ struct platform_nand_data {
> /* return the supported asynchronous timing mode. */
> static inline int onfi_get_async_timing_mode(struct nand_chip *chip)
> {
> - if (!chip->parameters.onfi.version)
> + if (!chip->parameters.onfi)
> return ONFI_TIMING_MODE_UNKNOWN;
>
> - return chip->parameters.onfi.async_timing_mode;
> + return chip->parameters.onfi->async_timing_mode;
> }
>
> int onfi_fill_data_interface(struct nand_chip *chip,

\
 
 \ /
  Last update: 2018-07-22 12:37    [W:0.380 / U:0.440 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site