lkml.org 
[lkml]   [2018]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 16/35] mtd: rawnand: nandsim: convert driver to nand_scan()
On Fri, 20 Jul 2018 17:15:08 +0200
Miquel Raynal <miquel.raynal@bootlin.com> wrote:

> Two helpers have been added to the core to make ECC-related
> configuration between the detection phase and the final NAND scan. Use
> these hooks and convert the driver to just use nand_scan() instead of
> both nand_scan_ident() and nand_scan_tail().
>
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

> ---
> drivers/mtd/nand/raw/nandsim.c | 82 +++++++++++++++++++++++-------------------
> 1 file changed, 45 insertions(+), 37 deletions(-)
>
> diff --git a/drivers/mtd/nand/raw/nandsim.c b/drivers/mtd/nand/raw/nandsim.c
> index 8a3b36cfe5ea..71ac034aee9c 100644
> --- a/drivers/mtd/nand/raw/nandsim.c
> +++ b/drivers/mtd/nand/raw/nandsim.c
> @@ -2192,6 +2192,48 @@ static void ns_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
> return;
> }
>
> +static int ns_attach_chip(struct nand_chip *chip)
> +{
> + unsigned int eccsteps, eccbytes;
> +
> + if (!bch)
> + return 0;
> +
> + if (!mtd_nand_has_bch()) {
> + NS_ERR("BCH ECC support is disabled\n");
> + return -EINVAL;
> + }
> +
> + /* Use 512-byte ecc blocks */
> + eccsteps = nsmtd->writesize / 512;
> + eccbytes = ((bch * 13) + 7) / 8;
> +
> + /* Do not bother supporting small page devices */
> + if (nsmtd->oobsize < 64 || !eccsteps) {
> + NS_ERR("BCH not available on small page devices\n");
> + return -EINVAL;
> + }
> +
> + if (((eccbytes * eccsteps) + 2) > nsmtd->oobsize) {
> + NS_ERR("Invalid BCH value %u\n", bch);
> + return -EINVAL;
> + }
> +
> + chip->ecc.mode = NAND_ECC_SOFT;
> + chip->ecc.algo = NAND_ECC_BCH;
> + chip->ecc.size = 512;
> + chip->ecc.strength = bch;
> + chip->ecc.bytes = eccbytes;
> +
> + NS_INFO("Using %u-bit/%u bytes BCH ECC\n", bch, chip->ecc.size);
> +
> + return 0;
> +}
> +
> +static const struct nand_controller_ops ns_controller_ops = {
> + .attach_chip = ns_attach_chip,
> +};
> +
> /*
> * Module initialization function
> */
> @@ -2276,44 +2318,10 @@ static int __init ns_init_module(void)
> if ((retval = parse_gravepages()) != 0)
> goto error;
>
> - retval = nand_scan_ident(nsmtd, 1, NULL);
> + chip->dummy_controller.ops = &ns_controller_ops;
> + retval = nand_scan(nsmtd, 1);
> if (retval) {
> - NS_ERR("cannot scan NAND Simulator device\n");
> - goto error;
> - }
> -
> - if (bch) {
> - unsigned int eccsteps, eccbytes;
> - if (!mtd_nand_has_bch()) {
> - NS_ERR("BCH ECC support is disabled\n");
> - retval = -EINVAL;
> - goto error;
> - }
> - /* use 512-byte ecc blocks */
> - eccsteps = nsmtd->writesize/512;
> - eccbytes = (bch*13+7)/8;
> - /* do not bother supporting small page devices */
> - if ((nsmtd->oobsize < 64) || !eccsteps) {
> - NS_ERR("bch not available on small page devices\n");
> - retval = -EINVAL;
> - goto error;
> - }
> - if ((eccbytes*eccsteps+2) > nsmtd->oobsize) {
> - NS_ERR("invalid bch value %u\n", bch);
> - retval = -EINVAL;
> - goto error;
> - }
> - chip->ecc.mode = NAND_ECC_SOFT;
> - chip->ecc.algo = NAND_ECC_BCH;
> - chip->ecc.size = 512;
> - chip->ecc.strength = bch;
> - chip->ecc.bytes = eccbytes;
> - NS_INFO("using %u-bit/%u bytes BCH ECC\n", bch, chip->ecc.size);
> - }
> -
> - retval = nand_scan_tail(nsmtd);
> - if (retval) {
> - NS_ERR("can't register NAND Simulator\n");
> + NS_ERR("Could not scan NAND Simulator device\n");
> goto error;
> }
>

\
 
 \ /
  Last update: 2018-07-21 19:22    [W:0.304 / U:3.408 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site