lkml.org 
[lkml]   [2018]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 1/2] leds: core: Introduce generic pattern interface
From
Date
Hi Pavel,

On 07/19/2018 10:20 PM, Pavel Machek wrote:
> Hi!
>
>>>> Please keep in mind that this is ABI documentation for the pattern file
>>>> to be exposed by LED core, and not by the pattern trigger, that, as we
>>>> agreed, will be implemented later. In this case, I'd go for
>>>
>>> Gosh, I got completely distracted by the recent discussion about
>>> pattern synchronization.
>>>
>>> So, to recap, we need to decide if we are taking Baolin's solution
>>> or we're opting for implementing pattern trigger.
>>>
>>> If we choose the latter, then we will also need some software
>>> pattern engine in the trigger, to be applied as a software pattern
>>> fallback for the devices without hardware pattern support.
>>> It will certainly delay the contribution process, provided that Baolin
>>> would find time for this work at all.
>>
>> I'd recommend the latter. Yes, software pattern as a fallback would be
>> nice, but I have that code already... let me get it back to running
>> state, and figure out where to add interface for "hardware
>> acceleration". I'd like to have same interface to userland, whether
>> pattern can be done by hardware or by software.
>
> For the record, I'd like something like this. (Software pattern should
> work. Hardware pattern... needs more work).

Thank you for the patch. I'll be able to comment on it in two weeks.
I'll be offline during that time.

Best regards,
Jacek Anaszewski

> diff --git a/drivers/leds/led-core.c b/drivers/leds/led-core.c
> index ede4fa0..8cf5962 100644
> --- a/drivers/leds/led-core.c
> +++ b/drivers/leds/led-core.c
> @@ -51,6 +51,8 @@ static void led_timer_function(struct timer_list *t)
> unsigned long brightness;
> unsigned long delay;
>
> + /* FIXME spin_lock(led_cdev->lock); protecting led_cdev->flags? */
> +
> if (!led_cdev->blink_delay_on || !led_cdev->blink_delay_off) {
> led_set_brightness_nosleep(led_cdev, LED_OFF);
> clear_bit(LED_BLINK_SW, &led_cdev->work_flags);
> diff --git a/drivers/leds/leds-sc27xx-bltc.c b/drivers/leds/leds-sc27xx-bltc.c
> index 9d9b7aa..898f92d 100644
> --- a/drivers/leds/leds-sc27xx-bltc.c
> +++ b/drivers/leds/leds-sc27xx-bltc.c
> @@ -6,6 +6,7 @@
> #include <linux/of.h>
> #include <linux/platform_device.h>
> #include <linux/regmap.h>
> +#include <linux/slab.h>
> #include <uapi/linux/uleds.h>
>
> /* PMIC global control register definition */
> @@ -32,8 +33,13 @@
> #define SC27XX_DUTY_MASK GENMASK(15, 0)
> #define SC27XX_MOD_MASK GENMASK(7, 0)
>
> +#define SC27XX_CURVE_SHIFT 8
> +#define SC27XX_CURVE_L_MASK GENMASK(7, 0)
> +#define SC27XX_CURVE_H_MASK GENMASK(15, 8)
> +
> #define SC27XX_LEDS_OFFSET 0x10
> #define SC27XX_LEDS_MAX 3
> +#define SC27XX_LEDS_PATTERN_CNT 4
>
> struct sc27xx_led {
> char name[LED_MAX_NAME_SIZE];
> @@ -122,6 +128,157 @@ static int sc27xx_led_set(struct led_classdev *ldev, enum led_brightness value)
> return err;
> }
>
> +static int sc27xx_led_pattern_clear(struct led_classdev *ldev)
> +{
> + struct sc27xx_led *leds = to_sc27xx_led(ldev);
> + struct regmap *regmap = leds->priv->regmap;
> + u32 base = sc27xx_led_get_offset(leds);
> + u32 ctrl_base = leds->priv->base + SC27XX_LEDS_CTRL;
> + u8 ctrl_shift = SC27XX_CTRL_SHIFT * leds->line;
> + int err;
> +
> + mutex_lock(&leds->priv->lock);
> +
> + /* Reset the rise, high, fall and low time to zero. */
> + regmap_write(regmap, base + SC27XX_LEDS_CURVE0, 0);
> + regmap_write(regmap, base + SC27XX_LEDS_CURVE1, 0);
> +
> + err = regmap_update_bits(regmap, ctrl_base,
> + (SC27XX_LED_RUN | SC27XX_LED_TYPE) << ctrl_shift, 0);
> +
> + mutex_unlock(&leds->priv->lock);
> +
> + return err;
> +}
> +
> +static int sc27xx_led_pattern_set(struct led_classdev *ldev,
> + struct led_pattern *pattern,
> + int len)
> +{
> + struct sc27xx_led *leds = to_sc27xx_led(ldev);
> + u32 base = sc27xx_led_get_offset(leds);
> + u32 ctrl_base = leds->priv->base + SC27XX_LEDS_CTRL;
> + u8 ctrl_shift = SC27XX_CTRL_SHIFT * leds->line;
> + struct regmap *regmap = leds->priv->regmap;
> + int err;
> +
> + /*
> + * Must contain 4 patterns to configure the rise time, high time, fall
> + * time and low time to enable the breathing mode.
> + */
> + if (len != SC27XX_LEDS_PATTERN_CNT)
> + return -EINVAL;
> +
> + mutex_lock(&leds->priv->lock);
> +
> + err = regmap_update_bits(regmap, base + SC27XX_LEDS_CURVE0,
> + SC27XX_CURVE_L_MASK, pattern[0].delta_t);
> + if (err)
> + goto out;
> +
> + err = regmap_update_bits(regmap, base + SC27XX_LEDS_CURVE1,
> + SC27XX_CURVE_L_MASK, pattern[1].delta_t);
> + if (err)
> + goto out;
> +
> + err = regmap_update_bits(regmap, base + SC27XX_LEDS_CURVE0,
> + SC27XX_CURVE_H_MASK,
> + pattern[2].delta_t << SC27XX_CURVE_SHIFT);
> + if (err)
> + goto out;
> +
> +
> + err = regmap_update_bits(regmap, base + SC27XX_LEDS_CURVE1,
> + SC27XX_CURVE_H_MASK,
> + pattern[3].delta_t << SC27XX_CURVE_SHIFT);
> + if (err)
> + goto out;
> +
> +
> + err = regmap_update_bits(regmap, base + SC27XX_LEDS_DUTY,
> + SC27XX_DUTY_MASK,
> + (pattern[0].brightness << SC27XX_DUTY_SHIFT) |
> + SC27XX_MOD_MASK);
> + if (err)
> + goto out;
> +
> + /* Enable the LED breathing mode */
> + err = regmap_update_bits(regmap, ctrl_base,
> + SC27XX_LED_RUN << ctrl_shift,
> + SC27XX_LED_RUN << ctrl_shift);
> +
> +out:
> + mutex_unlock(&leds->priv->lock);
> +
> + return err;
> +}
> +
> +static struct led_pattern *sc27xx_led_pattern_get(struct led_classdev *ldev,
> + int *len)
> +{
> + struct sc27xx_led *leds = to_sc27xx_led(ldev);
> + u32 base = sc27xx_led_get_offset(leds);
> + struct regmap *regmap = leds->priv->regmap;
> + struct led_pattern *pattern;
> + int i, err;
> + u32 val;
> +
> + /*
> + * Must allocate 4 patterns to show the rise time, high time, fall time
> + * and low time.
> + */
> + pattern = kcalloc(SC27XX_LEDS_PATTERN_CNT, sizeof(*pattern),
> + GFP_KERNEL);
> + if (!pattern)
> + return ERR_PTR(-ENOMEM);
> +
> + mutex_lock(&leds->priv->lock);
> +
> + err = regmap_read(regmap, base + SC27XX_LEDS_CURVE0, &val);
> + if (err)
> + goto out;
> +
> + pattern[0].delta_t = val & SC27XX_CURVE_L_MASK;
> +
> + err = regmap_read(regmap, base + SC27XX_LEDS_CURVE1, &val);
> + if (err)
> + goto out;
> +
> + pattern[1].delta_t = val & SC27XX_CURVE_L_MASK;
> +
> + err = regmap_read(regmap, base + SC27XX_LEDS_CURVE0, &val);
> + if (err)
> + goto out;
> +
> + pattern[2].delta_t = (val & SC27XX_CURVE_H_MASK) >> SC27XX_CURVE_SHIFT;
> +
> + err = regmap_read(regmap, base + SC27XX_LEDS_CURVE1, &val);
> + if (err)
> + goto out;
> +
> + pattern[3].delta_t = (val & SC27XX_CURVE_H_MASK) >> SC27XX_CURVE_SHIFT;
> +
> + err = regmap_read(regmap, base + SC27XX_LEDS_DUTY, &val);
> + if (err)
> + goto out;
> +
> + mutex_unlock(&leds->priv->lock);
> +
> + val = (val & SC27XX_DUTY_MASK) >> SC27XX_DUTY_SHIFT;
> + for (i = 0; i < SC27XX_LEDS_PATTERN_CNT; i++)
> + pattern[i].brightness = val;
> +
> + *len = SC27XX_LEDS_PATTERN_CNT;
> +
> + return pattern;
> +
> +out:
> + mutex_unlock(&leds->priv->lock);
> + kfree(pattern);
> +
> + return ERR_PTR(err);
> +}
> +
> static int sc27xx_led_register(struct device *dev, struct sc27xx_led_priv *priv)
> {
> int i, err;
> @@ -140,6 +297,9 @@ static int sc27xx_led_register(struct device *dev, struct sc27xx_led_priv *priv)
> led->priv = priv;
> led->ldev.name = led->name;
> led->ldev.brightness_set_blocking = sc27xx_led_set;
> + led->ldev.pattern_set = sc27xx_led_pattern_set;
> + led->ldev.pattern_get = sc27xx_led_pattern_get;
> + led->ldev.pattern_clear = sc27xx_led_pattern_clear;
>
> err = devm_led_classdev_register(dev, &led->ldev);
> if (err)
> diff --git a/drivers/leds/trigger/Kconfig b/drivers/leds/trigger/Kconfig
> index a2559b4..91ae5b0 100644
> --- a/drivers/leds/trigger/Kconfig
> +++ b/drivers/leds/trigger/Kconfig
> @@ -125,6 +125,16 @@ config LEDS_TRIGGER_CAMERA
> This enables direct flash/torch on/off by the driver, kernel space.
> If unsure, say Y.
>
> +config LEDS_TRIGGER_PATTERN
> + tristate "LED Pattern Trigger"
> + depends on LEDS_TRIGGERS
> + help
> + This allows LEDs blinking with an arbitrary pattern. Can be useful
> + on embedded systems with no screen to give out a status code to
> + a human.
> +
> + If unsure, say N
> +
> config LEDS_TRIGGER_PANIC
> bool "LED Panic Trigger"
> depends on LEDS_TRIGGERS
> diff --git a/drivers/leds/trigger/Makefile b/drivers/leds/trigger/Makefile
> index f3cfe19..ba6f3b9 100644
> --- a/drivers/leds/trigger/Makefile
> +++ b/drivers/leds/trigger/Makefile
> @@ -11,5 +11,6 @@ obj-$(CONFIG_LEDS_TRIGGER_ACTIVITY) += ledtrig-activity.o
> obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o
> obj-$(CONFIG_LEDS_TRIGGER_TRANSIENT) += ledtrig-transient.o
> obj-$(CONFIG_LEDS_TRIGGER_CAMERA) += ledtrig-camera.o
> +obj-$(CONFIG_LEDS_TRIGGER_PATTERN) += ledtrig-pattern.o
> obj-$(CONFIG_LEDS_TRIGGER_PANIC) += ledtrig-panic.o
> obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o
> diff --git a/drivers/leds/trigger/ledtrig-pattern.c b/drivers/leds/trigger/ledtrig-pattern.c
> new file mode 100644
> index 0000000..d31808d
> --- /dev/null
> +++ b/drivers/leds/trigger/ledtrig-pattern.c
> @@ -0,0 +1,400 @@
> +/*
> + * Arbitrary pattern trigger
> + *
> + * Copyright 2015, Epsiline
> + *
> + * Author : Raphaël Teysseyre <rteysseyre@gmail.com>
> + *
> + * Idea discussed with Pavel Machek <pavel@ucw.cz> on
> + * <linux-leds@vger.kernel.org> (march 2015, thread title
> + * [PATCH RFC] leds: Add status code trigger)
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#include <linux/types.h>
> +#include <linux/kernel.h>
> +#include <linux/slab.h>
> +#include <linux/leds.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/timer.h>
> +#include "../leds.h"
> +
> +struct pattern_step {
> + int brightness;
> + int time_ms;
> +};
> +
> +struct pattern_trig_data {
> + struct led_classdev *led_cdev;
> +
> + struct pattern_step *steps; /* Array describing the pattern */
> + struct mutex lock;
> + char is_sane;
> + struct pattern_step *curr;
> + struct pattern_step *next;
> + int time_ms; /* Time in current step */
> + int nsteps; /* Number of steps */
> + int repeat; /* < 0 means repeat indefinitely */
> + struct timer_list timer;
> +};
> +
> +#define MAX_NSTEPS (PAGE_SIZE/4)
> +/* The "pattern" attribute contains at most PAGE_SIZE characters.
> + Each line in this attribute is at least 4 characters long
> + (a 1-digit number for the led brighntess, a space,
> + a 1-digit number for the time, a semi-colon).
> + Therefore, there is at most PAGE_SIZE/4 steps. */
> +
> +#define UPDATE_INTERVAL 50
> +/* When doing gradual dimming, the led brightness
> + will be updated every UPDATE_INTERVAL milliseconds */
> +
> +#define PATTERN_SEPARATOR ","
> +
> +static int pattern_trig_initialize_data(struct pattern_trig_data *data)
> +{
> + mutex_init(&data->lock);
> + mutex_lock(&data->lock);
> +
> + data->is_sane = 0;
> + data->steps = kzalloc(MAX_NSTEPS*sizeof(struct pattern_step),
> + GFP_KERNEL);
> + if (!data->steps)
> + return -ENOMEM;
> +
> + data->curr = NULL;
> + data->next = NULL;
> + data->time_ms = 0;
> + data->nsteps = 0;
> + data->repeat = -1;
> + //data->timer = __TIMER_INITIALIZER(NULL, 0);
> +
> + mutex_unlock(&data->lock);
> + return 0;
> +}
> +
> +static void pattern_trig_clear_data(struct pattern_trig_data *data)
> +{
> + data->is_sane = 0;
> + kfree(data->steps);
> +}
> +
> +/*
> + * is_sane : pattern checking.
> + * A pattern satisfying these three conditions is reported as sane :
> + * - At least two steps
> + * - At least one step with time >= UPDATE_INTERVAL
> + * - At least two steps with differing brightnesses
> + * When @data isn't sane, a sensible brightness
> + * default is suggested in @brightness
> + *
> + * DO NOT call pattern_trig_update on a not-sane pattern,
> + * you'll be punished with an infinite loop in the kernel.
> + */
> +static int is_sane(struct pattern_trig_data *data, int *brightness)
> +{
> + int i;
> + char stept_ok = 0;
> + char stepb_ok = 0;
> +
> + *brightness = 0;
> + if (data->nsteps < 1)
> + return 0;
> +
> + *brightness = data->steps[0].brightness;
> + if (data->nsteps < 2)
> + return 0;
> +
> + for (i = 0; i < data->nsteps; i++) {
> + if (data->steps[i].time_ms >= UPDATE_INTERVAL) {
> + /* FIXME: this is wrong */
> + if (stepb_ok)
> + return 1;
> + stept_ok = 1;
> + }
> + if (data->steps[i].brightness != data->steps[0].brightness) {
> + if (stept_ok)
> + return 1;
> + stepb_ok = 1;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static void reset_pattern(struct pattern_trig_data *data,
> + struct led_classdev *led_cdev)
> +{
> + int brightness;
> +
> + if (led_cdev->pattern_clear) {
> + led_cdev->pattern_clear(led_cdev);
> + }
> +
> + del_timer_sync(&data->timer);
> +
> + if (led_cdev->pattern_set && led_cdev->pattern_set(led_cdev, data->steps, data->nsteps)) {
> + return;
> + }
> +
> + if (!is_sane(data, &brightness)) {
> + led_set_brightness(led_cdev, brightness);
> + return;
> + }
> +
> + data->curr = data->steps;
> + data->next = data->steps + 1;
> + data->time_ms = 0;
> + data->is_sane = 1;
> +
> + data->timer.expires = jiffies;
> + add_timer(&data->timer);
> +}
> +
> +/* --- Sysfs handling --- */
> +
> +static ssize_t pattern_trig_show_repeat(
> + struct device *dev, struct device_attribute *attr, char *buf)
> +{
> + struct led_classdev *led_cdev = dev_get_drvdata(dev);
> + struct pattern_trig_data *data = led_cdev->trigger_data;
> +
> + return scnprintf(buf, PAGE_SIZE, "%d\n", data->repeat);
> +}
> +
> +static ssize_t pattern_trig_store_repeat(
> + struct device *dev, struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct led_classdev *led_cdev = dev_get_drvdata(dev);
> + struct pattern_trig_data *data = led_cdev->trigger_data;
> + long res;
> + int err;
> +
> + err = kstrtol(buf, 10, &res);
> + if (err)
> + return err;
> +
> + data->repeat = res < 0 ? -1 : res;
> + reset_pattern(data, led_cdev);
> +
> + return count;
> +}
> +
> +DEVICE_ATTR(repeat, S_IRUGO | S_IWUSR,
> + pattern_trig_show_repeat, pattern_trig_store_repeat);
> +
> +static ssize_t pattern_trig_show_pattern(
> + struct device *dev, struct device_attribute *attr, char *buf)
> +{
> + struct led_classdev *led_cdev = dev_get_drvdata(dev);
> + struct pattern_trig_data *data = led_cdev->trigger_data;
> + ssize_t count = 0;
> + int i;
> +
> + if (!data->steps || !data->nsteps)
> + return 0;
> +
> + for (i = 0; i < data->nsteps; i++)
> + count += scnprintf(buf + count, PAGE_SIZE - count,
> + "%d %d" PATTERN_SEPARATOR,
> + data->steps[i].brightness,
> + data->steps[i].time_ms);
> + buf[count - 1] = '\n';
> + buf[count] = '\0';
> +
> + return count + 1;
> +}
> +
> +static ssize_t pattern_trig_store_pattern(
> + struct device *dev, struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct led_classdev *led_cdev = dev_get_drvdata(dev);
> + struct pattern_trig_data *data = led_cdev->trigger_data;
> + int cr = 0; /* Characters read on one conversion */
> + int tcr = 0; /* Total characters read */
> + int ccount; /* Number of successful conversions */
> +
> + mutex_lock(&data->lock);
> + data->is_sane = 0;
> +
> + for (data->nsteps = 0; data->nsteps < MAX_NSTEPS; data->nsteps++) {
> + cr = 0;
> + ccount = sscanf(buf + tcr, "%d %d " PATTERN_SEPARATOR "%n",
> + &data->steps[data->nsteps].brightness,
> + &data->steps[data->nsteps].time_ms, &cr);
> +
> + if (!cr) { /* Invalid syntax or end of pattern */
> + if (ccount == 2)
> + data->nsteps++;
> + mutex_unlock(&data->lock);
> + reset_pattern(data, led_cdev);
> + return count;
> + }
> +
> + tcr += cr;
> + }
> +
> + /* Shouldn't reach that */
> + WARN(1, "MAX_NSTEP too small. Please report\n");
> + mutex_unlock(&data->lock);
> + return count;
> +}
> +
> +DEVICE_ATTR(pattern, S_IRUGO | S_IWUSR,
> + pattern_trig_show_pattern, pattern_trig_store_pattern);
> +
> +static int pattern_trig_create_sysfs_files(struct device *dev)
> +{
> + int err;
> +
> + err = device_create_file(dev, &dev_attr_repeat);
> + if (err)
> + return err;
> +
> + err = device_create_file(dev, &dev_attr_pattern);
> + if (err)
> + device_remove_file(dev, &dev_attr_repeat);
> +
> + return err;
> +}
> +
> +static void pattern_trig_remove_sysfs_files(struct device *dev)
> +{
> + device_remove_file(dev, &dev_attr_pattern);
> + device_remove_file(dev, &dev_attr_repeat);
> +}
> +
> +/* --- Led intensity updating --- */
> +
> +static int compute_brightness(struct pattern_trig_data *data)
> +{
> + if (data->time_ms == 0)
> + return data->curr->brightness;
> +
> + if (data->curr->time_ms == 0)
> + return data->next->brightness;
> +
> + return data->curr->brightness + data->time_ms
> + * (data->next->brightness - data->curr->brightness)
> + / data->curr->time_ms;
> +}
> +
> +static void update_to_next_step(struct pattern_trig_data *data)
> +{
> + data->curr = data->next;
> + if (data->curr == data->steps)
> + data->repeat--;
> +
> + if (data->next == data->steps + data->nsteps - 1)
> + data->next = data->steps;
> + else
> + data->next++;
> +
> + data->time_ms = 0;
> +}
> +
> +static void pattern_trig_update(struct timer_list *t)
> +{
> + struct pattern_trig_data *data = from_timer(data, t, timer);
> +
> + mutex_lock(&data->lock);
> +
> + if (!data->is_sane || !data->repeat) {
> + mutex_unlock(&data->lock);
> + return;
> + }
> +
> + if (data->time_ms > data->curr->time_ms)
> + update_to_next_step(data);
> +
> + /* is_sane() checked that there is at least
> + one step with time_ms >= UPDATE_INTERVAL
> + so we won't go in an infinite loop */
> + while (data->curr->time_ms < UPDATE_INTERVAL)
> + update_to_next_step(data);
> +
> + if (data->next->brightness == data->curr->brightness) {
> + /* Constant brightness for this step */
> + led_set_brightness(data->led_cdev, data->curr->brightness);
> + mod_timer(&data->timer, jiffies
> + + msecs_to_jiffies(data->curr->time_ms));
> + update_to_next_step(data);
> + } else {
> + /* Gradual dimming */
> + led_set_brightness(data->led_cdev, compute_brightness(data));
> + data->time_ms += UPDATE_INTERVAL;
> + mod_timer(&data->timer, jiffies
> + + msecs_to_jiffies(UPDATE_INTERVAL));
> + }
> +
> + mutex_unlock(&data->lock);
> +}
> +
> +/* --- Trigger activation --- */
> +
> +static void pattern_trig_activate(struct led_classdev *led_cdev)
> +{
> + struct pattern_trig_data *data = NULL;
> + int err;
> +
> + data = kzalloc(sizeof(*data), GFP_KERNEL);
> + if (!data)
> + return;
> +
> + err = pattern_trig_initialize_data(data);
> + if (err) {
> + kfree(data);
> + return;
> + }
> +
> + data->led_cdev = led_cdev;
> + led_cdev->trigger_data = data;
> + timer_setup(&data->timer, pattern_trig_update, 0);
> + pattern_trig_create_sysfs_files(led_cdev->dev);
> +}
> +
> +static void pattern_trig_deactivate(struct led_classdev *led_cdev)
> +{
> + struct pattern_trig_data *data = led_cdev->trigger_data;
> +
> + if (data) {
> + pattern_trig_remove_sysfs_files(led_cdev->dev);
> + del_timer_sync(&data->timer);
> + led_set_brightness(led_cdev, LED_OFF);
> + pattern_trig_clear_data(data);
> + kfree(data);
> + led_cdev->trigger_data = NULL;
> + }
> +}
> +
> +static struct led_trigger pattern_led_trigger = {
> + .name = "pattern",
> + .activate = pattern_trig_activate,
> + .deactivate = pattern_trig_deactivate,
> +};
> +
> +/* --- Module loading/unloading --- */
> +
> +static int __init pattern_trig_init(void)
> +{
> + return led_trigger_register(&pattern_led_trigger);
> +}
> +
> +static void __exit pattern_trig_exit(void)
> +{
> + led_trigger_unregister(&pattern_led_trigger);
> +}
> +
> +module_init(pattern_trig_init);
> +module_exit(pattern_trig_exit);
> +
> +MODULE_AUTHOR("Raphael Teysseyre <rteysseyre@gmail.com");
> +MODULE_DESCRIPTION("Pattern LED trigger");
> +MODULE_LICENSE("GPL");
> diff --git a/include/linux/leds.h b/include/linux/leds.h
> index b7e8255..6940ee2 100644
> --- a/include/linux/leds.h
> +++ b/include/linux/leds.h
> @@ -22,6 +22,7 @@
> #include <linux/workqueue.h>
>
> struct device;
> +struct led_pattern;
> /*
> * LED Core
> */
> @@ -88,6 +89,14 @@ struct led_classdev {
> unsigned long *delay_on,
> unsigned long *delay_off);
>
> + int (*pattern_set)(struct led_classdev *led_cdev,
> + struct led_pattern *pattern, int len);
> +
> + int (*pattern_clear)(struct led_classdev *led_cdev);
> +
> + struct led_pattern *(*pattern_get)(struct led_classdev *led_cdev,
> + int *len);
> +
> struct device *dev;
> const struct attribute_group **groups;
>
> @@ -101,7 +110,7 @@ struct led_classdev {
> void (*flash_resume)(struct led_classdev *led_cdev);
>
> struct work_struct set_brightness_work;
> - int delayed_set_value;
> + enum led_brightness delayed_set_value;
>
> #ifdef CONFIG_LEDS_TRIGGERS
> /* Protects the trigger data below */
> @@ -446,4 +455,14 @@ static inline void led_classdev_notify_brightness_hw_changed(
> struct led_classdev *led_cdev, enum led_brightness brightness) { }
> #endif
>
> +/**
> + * struct led_pattern - brightness value in a pattern
> + * @delta_t: delay until next entry, in milliseconds
> + * @brightness: brightness at time = 0
> + */
> +struct led_pattern {
> + int delta_t;
> + int brightness;
> +};
> +
> #endif /* __LINUX_LEDS_H_INCLUDED */
>
>
>
>
>

\
 
 \ /
  Last update: 2018-07-20 20:08    [W:0.139 / U:3.984 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site