lkml.org 
[lkml]   [2018]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH -next v4 1/3] regmap: add SCCB support
2018年7月19日(木) 0:28 Wolfram Sang <wsa@the-dreams.de>:
>
> On Tue, Jul 17, 2018 at 12:47:48AM +0900, Akinobu Mita wrote:
> > This adds Serial Camera Control Bus (SCCB) support for regmap API that
> > is intended to be used by some of Omnivision sensor drivers.
> >
> > The ov772x and ov9650 drivers are going to use this SCCB regmap API.
> >
> > The ov772x driver was previously only worked with the i2c controller
> > drivers that support I2C_FUNC_PROTOCOL_MANGLING, because the ov772x
> > device doesn't support repeated starts. After commit 0b964d183cbf
> > ("media: ov772x: allow i2c controllers without
> > I2C_FUNC_PROTOCOL_MANGLING"), reading ov772x register is replaced with
> > issuing two separated i2c messages in order to avoid repeated start.
> > Using this SCCB regmap hides the implementation detail.
> >
> > The ov9650 driver also issues two separated i2c messages to read the
> > registers as the device doesn't support repeated start. So it can
> > make use of this SCCB regmap.
>
> Cool, this series really gets better and better each time. Thank you for
> keeping at it! And thanks to everyone for their suggestions. I really
> like how we do not introduce a couple of i2c_sccb_* functions with a
> need to export them. And given the nature of regmap, I'd think it should
> be fairly easy to add support for ov2659 somewhen which has 16 bit
> registers? Only minor nits:

I have an ov2659 sensor. The ov2659 driver works with i2c adapter that
doesn't know I2C_FUNC_PROTOCOL_MANGLING, so it actually supports repeated
start.

But ov5645, ov5647, ov7251 drivers may want to use SCCB regmap API for
16-bit register. Because they use i2c_master_send + i2c_master_recv
for reading register value.

> > +#include <linux/regmap.h>
> > +#include <linux/i2c.h>
> > +#include <linux/module.h>
>
> Sort these?
>
> > +/**
> > + * regmap_sccb_read - Read data from SCCB slave device
> > + * @context: Device that will be interacted wit
>
> "with"
>
> > + ret = __i2c_smbus_xfer(i2c->adapter, i2c->addr, i2c->flags,
> > + I2C_SMBUS_WRITE, reg, I2C_SMBUS_BYTE, NULL);
>
> Mark: __i2c_smbus_xfer is a dependency on i2c/for-next. Do you want an
> immutable branch for that?
>
> > +/**
> > + * regmap_sccb_write - Write data to SCCB slave device
> > + * @context: Device that will be interacted wit
>
> "with"
>
> But in general (especially for the I2C parts):
>
> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Thank you for your reviewing.

\
 
 \ /
  Last update: 2018-07-20 19:43    [W:0.091 / U:8.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site