lkml.org 
[lkml]   [2018]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/3] arm64: dts: synaptics: add dtsi file for Synaptics AS370 SoC
On Fri, Jul 13, 2018 at 05:26:26PM +0800, Jisheng Zhang wrote:
> Add initial dtsi file to support Synaptics AS370 SoC with quad
> Cortex-A53 CPUs.
>
> Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
> ---
> arch/arm64/boot/dts/synaptics/as370.dtsi | 177 +++++++++++++++++++++++
> 1 file changed, 177 insertions(+)
> create mode 100644 arch/arm64/boot/dts/synaptics/as370.dtsi
>
> diff --git a/arch/arm64/boot/dts/synaptics/as370.dtsi b/arch/arm64/boot/dts/synaptics/as370.dtsi
> new file mode 100644
> index 000000000000..20f3d658c566
> --- /dev/null
> +++ b/arch/arm64/boot/dts/synaptics/as370.dtsi
> @@ -0,0 +1,177 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright (C) 2018 Synaptics Incorporated
> + *
> + * Author: Jisheng Zhang <jszhang@kernel.org>
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> + compatible = "syna,as370";
> + interrupt-parent = <&gic>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + aliases {
> + serial0 = &uart0;

This normally goes in the board file. All boards will use this?

> + };
> +
> + psci {
> + compatible = "arm,psci-1.0";
> + method = "smc";
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu0: cpu@0 {
> + compatible = "arm,cortex-a53", "arm,armv8";
> + device_type = "cpu";
> + reg = <0x0>;
> + enable-method = "psci";
> + next-level-cache = <&l2>;
> + cpu-idle-states = <&CPU_SLEEP_0>;
> + };
> +
> + cpu1: cpu@1 {
> + compatible = "arm,cortex-a53", "arm,armv8";
> + device_type = "cpu";
> + reg = <0x1>;
> + enable-method = "psci";
> + next-level-cache = <&l2>;
> + cpu-idle-states = <&CPU_SLEEP_0>;
> + };
> +
> + cpu2: cpu@2 {
> + compatible = "arm,cortex-a53", "arm,armv8";
> + device_type = "cpu";
> + reg = <0x2>;
> + enable-method = "psci";
> + next-level-cache = <&l2>;
> + cpu-idle-states = <&CPU_SLEEP_0>;
> + };
> +
> + cpu3: cpu@3 {
> + compatible = "arm,cortex-a53", "arm,armv8";
> + device_type = "cpu";
> + reg = <0x3>;
> + enable-method = "psci";
> + next-level-cache = <&l2>;
> + cpu-idle-states = <&CPU_SLEEP_0>;
> + };
> +
> + l2: cache {
> + compatible = "cache";

Why do you need this node? Doesn't define

> + };
> +
> + idle-states {
> + entry-method = "psci";
> + CPU_SLEEP_0: cpu-sleep-0 {
> + compatible = "arm,idle-state";
> + local-timer-stop;
> + arm,psci-suspend-param = <0x0010000>;
> + entry-latency-us = <75>;
> + exit-latency-us = <155>;
> + min-residency-us = <1000>;
> + };
> + };
> + };
> +
> + osc: osc {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <25000000>;
> + };
> +
> + pmu {
> + compatible = "arm,cortex-a53-pmu";
> + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-affinity = <&cpu0>,
> + <&cpu1>,
> + <&cpu2>,
> + <&cpu3>;
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> + };
> +
> + soc@f7000000 {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0 0xf7000000 0x1000000>;
> +
> + gic: interrupt-controller@901000 {
> + compatible = "arm,gic-400";
> + #interrupt-cells = <3>;
> + interrupt-controller;
> + reg = <0x901000 0x1000>,
> + <0x902000 0x2000>,
> + <0x904000 0x2000>,
> + <0x906000 0x2000>;
> + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> + };
> +
> + apb@e80000 {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0xe80000 0x10000>;
> +
> + uart0: uart@0c00 {

serial@c00

> + compatible = "snps,dw-apb-uart";
> + reg = <0x0c00 0x100>;
> + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&osc>;
> + reg-shift = <2>;
> + status = "disabled";
> + };
> +
> + gpio0: gpio@1800 {
> + compatible = "snps,dw-apb-gpio";
> + reg = <0x1800 0x400>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + porta: gpio-port@0 {
> + compatible = "snps,dw-apb-gpio-port";
> + gpio-controller;
> + #gpio-cells = <2>;
> + snps,nr-gpios = <32>;
> + reg = <0>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };
> +
> + gpio1: gpio@2000 {
> + compatible = "snps,dw-apb-gpio";
> + reg = <0x2000 0x400>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + portb: gpio-port@1 {
> + compatible = "snps,dw-apb-gpio-port";
> + gpio-controller;
> + #gpio-cells = <2>;
> + snps,nr-gpios = <32>;
> + reg = <0>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };
> + };
> + };
> +};
> --
> 2.18.0
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html

\
 
 \ /
  Last update: 2018-07-20 17:23    [W:0.089 / U:2.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site