lkml.org 
[lkml]   [2018]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 22/35] mtd: rawnand: tango: convert driver to nand_scan()
Date
Two helpers have been added to the core to make ECC-related
configuration between the detection phase and the final NAND scan. Use
these hooks and convert the driver to just use nand_scan() instead of
both nand_scan_ident() and nand_scan_tail().

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
drivers/mtd/nand/raw/tango_nand.c | 40 +++++++++++++++++++++++----------------
1 file changed, 24 insertions(+), 16 deletions(-)

diff --git a/drivers/mtd/nand/raw/tango_nand.c b/drivers/mtd/nand/raw/tango_nand.c
index dd7a26efdf4f..a448d0797cd5 100644
--- a/drivers/mtd/nand/raw/tango_nand.c
+++ b/drivers/mtd/nand/raw/tango_nand.c
@@ -517,6 +517,28 @@ static int tango_set_timings(struct mtd_info *mtd, int csline,
return 0;
}

+static int tango_attach_chip(struct nand_chip *chip)
+{
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+
+ ecc->mode = NAND_ECC_HW;
+ ecc->algo = NAND_ECC_BCH;
+ ecc->bytes = DIV_ROUND_UP(ecc->strength * FIELD_ORDER, BITS_PER_BYTE);
+
+ ecc->read_page_raw = tango_read_page_raw;
+ ecc->write_page_raw = tango_write_page_raw;
+ ecc->read_page = tango_read_page;
+ ecc->write_page = tango_write_page;
+ ecc->read_oob = tango_read_oob;
+ ecc->write_oob = tango_write_oob;
+
+ return 0;
+}
+
+static const struct nand_controller_ops tango_controller_ops = {
+ .attach_chip = tango_attach_chip,
+};
+
static int chip_init(struct device *dev, struct device_node *np)
{
u32 cs;
@@ -560,28 +582,14 @@ static int chip_init(struct device *dev, struct device_node *np)
NAND_NO_SUBPAGE_WRITE |
NAND_WAIT_TCCS;
chip->controller = &nfc->hw;
+ chip->controller->ops = &tango_controller_ops;
tchip->base = nfc->pbus_base + (cs * 256);

nand_set_flash_node(chip, np);
mtd_set_ooblayout(mtd, &tango_nand_ooblayout_ops);
mtd->dev.parent = dev;

- err = nand_scan_ident(mtd, 1, NULL);
- if (err)
- return err;
-
- ecc->mode = NAND_ECC_HW;
- ecc->algo = NAND_ECC_BCH;
- ecc->bytes = DIV_ROUND_UP(ecc->strength * FIELD_ORDER, BITS_PER_BYTE);
-
- ecc->read_page_raw = tango_read_page_raw;
- ecc->write_page_raw = tango_write_page_raw;
- ecc->read_page = tango_read_page;
- ecc->write_page = tango_write_page;
- ecc->read_oob = tango_read_oob;
- ecc->write_oob = tango_write_oob;
-
- err = nand_scan_tail(mtd);
+ err = nand_scan(mtd, 1);
if (err)
return err;

--
2.14.1
\
 
 \ /
  Last update: 2018-07-20 17:17    [W:0.240 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site