lkml.org 
[lkml]   [2018]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 21/35] mtd: rawnand: sunxi: convert driver to nand_scan()
Date
Two helpers have been added to the core to make ECC-related
configuration between the detection phase and the final NAND scan. Use
these hooks and convert the driver to just use nand_scan() instead of
both nand_scan_ident() and nand_scan_tail().

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
drivers/mtd/nand/raw/sunxi_nand.c | 43 +++++++++++++++++----------------------
1 file changed, 19 insertions(+), 24 deletions(-)

diff --git a/drivers/mtd/nand/raw/sunxi_nand.c b/drivers/mtd/nand/raw/sunxi_nand.c
index 07f3ff9a28f2..a4d23381003d 100644
--- a/drivers/mtd/nand/raw/sunxi_nand.c
+++ b/drivers/mtd/nand/raw/sunxi_nand.c
@@ -1816,12 +1816,21 @@ static void sunxi_nand_ecc_cleanup(struct nand_ecc_ctrl *ecc)
}
}

-static int sunxi_nand_ecc_init(struct mtd_info *mtd, struct nand_ecc_ctrl *ecc,
- struct device_node *np)
+static int sunxi_nand_attach_chip(struct nand_chip *nand)
{
- struct nand_chip *nand = mtd_to_nand(mtd);
+ struct mtd_info *mtd = nand_to_mtd(nand);
+ struct nand_ecc_ctrl *ecc = &nand->ecc;
+ struct device_node *np = nand_get_flash_node(nand);
int ret;

+ if (nand->bbt_options & NAND_BBT_USE_FLASH)
+ nand->bbt_options |= NAND_BBT_NO_OOB;
+
+ if (nand->options & NAND_NEED_SCRAMBLING)
+ nand->options |= NAND_NO_SUBPAGE_WRITE;
+
+ nand->options |= NAND_SUBPAGE_READ;
+
if (!ecc->size) {
ecc->size = nand->ecc_step_ds;
ecc->strength = nand->ecc_strength_ds;
@@ -1846,6 +1855,10 @@ static int sunxi_nand_ecc_init(struct mtd_info *mtd, struct nand_ecc_ctrl *ecc,
return 0;
}

+static const struct nand_controller_ops sunxi_nand_controller_ops = {
+ .attach_chip = sunxi_nand_attach_chip,
+};
+
static int sunxi_nand_chip_init(struct device *dev, struct sunxi_nfc *nfc,
struct device_node *np)
{
@@ -1911,6 +1924,8 @@ static int sunxi_nand_chip_init(struct device *dev, struct sunxi_nfc *nfc,
/* Default tR value specified in the ONFI spec (chapter 4.15.1) */
nand->chip_delay = 200;
nand->controller = &nfc->controller;
+ nand->controller->ops = &sunxi_nand_controller_ops;
+
/*
* Set the ECC mode to the default value in case nothing is specified
* in the DT.
@@ -1927,30 +1942,10 @@ static int sunxi_nand_chip_init(struct device *dev, struct sunxi_nfc *nfc,
mtd = nand_to_mtd(nand);
mtd->dev.parent = dev;

- ret = nand_scan_ident(mtd, nsels, NULL);
+ ret = nand_scan(mtd, nsels);
if (ret)
return ret;

- if (nand->bbt_options & NAND_BBT_USE_FLASH)
- nand->bbt_options |= NAND_BBT_NO_OOB;
-
- if (nand->options & NAND_NEED_SCRAMBLING)
- nand->options |= NAND_NO_SUBPAGE_WRITE;
-
- nand->options |= NAND_SUBPAGE_READ;
-
- ret = sunxi_nand_ecc_init(mtd, &nand->ecc, np);
- if (ret) {
- dev_err(dev, "ECC init failed: %d\n", ret);
- return ret;
- }
-
- ret = nand_scan_tail(mtd);
- if (ret) {
- dev_err(dev, "nand_scan_tail failed: %d\n", ret);
- return ret;
- }
-
ret = mtd_device_register(mtd, NULL, 0);
if (ret) {
dev_err(dev, "failed to register mtd device: %d\n", ret);
--
2.14.1
\
 
 \ /
  Last update: 2018-07-20 17:16    [W:0.357 / U:0.440 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site