lkml.org 
[lkml]   [2018]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V4 7/8] backlight: qcom-wled: add support for short circuit handling
From
Date
On 09/07/18 11:22, Kiran Gunda wrote:
> Handle the short circuit interrupt and check if the short circuit
> interrupt is valid. Re-enable the module to check if it goes
> away. Disable the module altogether if the short circuit event
> persists.
>
> Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
> Changes from V3:
> - Added Reviewed by tag.
> - Addressed minor comments from Vinod
>
> drivers/video/backlight/qcom-wled.c | 132 ++++++++++++++++++++++++++++++++++--
> 1 file changed, 128 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c
> index 362d254..a14f1a6 100644
> --- a/drivers/video/backlight/qcom-wled.c
> +++ b/drivers/video/backlight/qcom-wled.c
> @@ -10,6 +10,9 @@
> * GNU General Public License for more details.
> */
>
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/ktime.h>
> #include <linux/kernel.h>
> #include <linux/backlight.h>
> #include <linux/module.h>
> @@ -64,6 +67,16 @@
> #define WLED3_SINK_REG_STR_CABC(n) (0x66 + (n * 0x10))
> #define WLED3_SINK_REG_STR_CABC_MASK BIT(7)
>
> +/* WLED4 specific control registers */
> +#define WLED4_CTRL_REG_SHORT_PROTECT 0x5e
> +#define WLED4_CTRL_REG_SHORT_EN_MASK BIT(7)
> +
> +#define WLED4_CTRL_REG_SEC_ACCESS 0xd0
> +#define WLED4_CTRL_REG_SEC_UNLOCK 0xa5
> +
> +#define WLED4_CTRL_REG_TEST1 0xe2
> +#define WLED4_CTRL_REG_TEST1_EXT_FET_DTEST2 0x09
> +
> /* WLED4 specific sink registers */
> #define WLED4_SINK_REG_CURR_SINK 0x46
> #define WLED4_SINK_REG_CURR_SINK_MASK GENMASK(7, 4)
> @@ -113,17 +126,23 @@ struct wled_config {
> bool cs_out_en;
> bool ext_gen;
> bool cabc;
> + bool external_pfet;
> };
>
> struct wled {
> const char *name;
> struct device *dev;
> struct regmap *regmap;
> + struct mutex lock; /* Lock to avoid race from thread irq handler */
> + ktime_t last_short_event;
> u16 ctrl_addr;
> u16 sink_addr;
> u16 max_string_count;
> u32 brightness;
> u32 max_brightness;
> + u32 short_count;
> + bool disabled_by_short;
> + bool has_short_detect;
>
> struct wled_config cfg;
> int (*wled_set_brightness)(struct wled *wled, u16 brightness);
> @@ -174,6 +193,9 @@ static int wled_module_enable(struct wled *wled, int val)
> {
> int rc;
>
> + if (wled->disabled_by_short)
> + return -EFAULT;

EFAULT means bad address (memory fault). Perhaps EIO or maybe even
something more exotic like ENXIO might be more appropriate?


> +
> rc = regmap_update_bits(wled->regmap, wled->ctrl_addr +
> WLED_CTRL_REG_MOD_EN,
> WLED_CTRL_REG_MOD_EN_MASK,
> @@ -210,18 +232,19 @@ static int wled_update_status(struct backlight_device *bl)
> bl->props.state & BL_CORE_FBBLANK)
> brightness = 0;
>
> + mutex_lock(&wled->lock);
> if (brightness) {
> rc = wled->wled_set_brightness(wled, brightness);
> if (rc < 0) {
> dev_err(wled->dev, "wled failed to set brightness rc:%d\n",
> rc);
> - return rc;
> + goto unlock_mutex;
> }
>
> rc = wled_sync_toggle(wled);
> if (rc < 0) {
> dev_err(wled->dev, "wled sync failed rc:%d\n", rc);
> - return rc;
> + goto unlock_mutex;
> }
> }
>
> @@ -229,15 +252,61 @@ static int wled_update_status(struct backlight_device *bl)
> rc = wled_module_enable(wled, !!brightness);
> if (rc < 0) {
> dev_err(wled->dev, "wled enable failed rc:%d\n", rc);
> - return rc;
> + goto unlock_mutex;
> }
> }
>
> wled->brightness = brightness;
>
> +unlock_mutex:
> + mutex_unlock(&wled->lock);
> +
> return rc;
> }
>
> +#define WLED_SHORT_DLY_MS 20
> +#define WLED_SHORT_CNT_MAX 5
> +#define WLED_SHORT_RESET_CNT_DLY_US USEC_PER_SEC
> +
> +static irqreturn_t wled_short_irq_handler(int irq, void *_wled)
> +{
> + struct wled *wled = _wled;
> + int rc;
> + s64 elapsed_time;
> +
> + wled->short_count++;
> + mutex_lock(&wled->lock);
> + rc = wled_module_enable(wled, false);
> + if (rc < 0) {
> + dev_err(wled->dev, "wled disable failed rc:%d\n", rc);
> + goto unlock_mutex;
> + }
> +
> + elapsed_time = ktime_us_delta(ktime_get(),
> + wled->last_short_event);
> + if (elapsed_time > WLED_SHORT_RESET_CNT_DLY_US)
> + wled->short_count = 0;

Shouldn't this reset to 1 (e.g. we have just seen a short).


Daniel.

\
 
 \ /
  Last update: 2018-07-20 16:09    [W:0.151 / U:8.612 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site