lkml.org 
[lkml]   [2018]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/8] clk: tegra: host1x has fractional divider
Date
The host1x clock according to both tegra2 and tegra3 manuals is
an 8bit divider with lsb being fractional. This is running into
an issue where the host1x is being set on a tegra20a system to
266.4MHz but ends up at 222MHz instead.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
---
drivers/clk/tegra/clk-tegra-periph.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/tegra/clk-tegra-periph.c b/drivers/clk/tegra/clk-tegra-periph.c
index 2acba2986bc6..8fa1cecf18a0 100644
--- a/drivers/clk/tegra/clk-tegra-periph.c
+++ b/drivers/clk/tegra/clk-tegra-periph.c
@@ -644,7 +644,7 @@ static struct tegra_periph_init_data periph_clks[] = {
INT("vde", mux_pllp_pllc_pllm_clkm, CLK_SOURCE_VDE, 61, 0, tegra_clk_vde),
INT("vi", mux_pllm_pllc_pllp_plla, CLK_SOURCE_VI, 20, 0, tegra_clk_vi),
INT("epp", mux_pllm_pllc_pllp_plla, CLK_SOURCE_EPP, 19, 0, tegra_clk_epp),
- INT("host1x", mux_pllm_pllc_pllp_plla, CLK_SOURCE_HOST1X, 28, 0, tegra_clk_host1x),
+ MUX("host1x", mux_pllm_pllc_pllp_plla, CLK_SOURCE_HOST1X, 28, 0, tegra_clk_host1x),
INT("mpe", mux_pllm_pllc_pllp_plla, CLK_SOURCE_MPE, 60, 0, tegra_clk_mpe),
INT("2d", mux_pllm_pllc_pllp_plla, CLK_SOURCE_2D, 21, 0, tegra_clk_gr2d),
INT("3d", mux_pllm_pllc_pllp_plla, CLK_SOURCE_3D, 24, 0, tegra_clk_gr3d),
--
2.18.0
\
 
 \ /
  Last update: 2018-07-20 15:46    [W:0.151 / U:0.824 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site