lkml.org 
[lkml]   [2018]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V4 5/8] backlight: qcom-wled: Restructure the driver for WLED3
From
Date
On 09/07/18 11:22, Kiran Gunda wrote:
> Restructure the driver to add the support for new WLED
> peripherals.
>
> Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>

Acked-by: Daniel Thompson <daniel.thompson@linaro.org>


> ---
> Changes from V3:
> - This is the new patch after splitting the
> "backlight: qcom-wled: Add support for WLED4 peripheral" patch
> to seperate the WLED3 specific restructure.
>
> drivers/video/backlight/qcom-wled.c | 396 ++++++++++++++++++++++--------------
> 1 file changed, 246 insertions(+), 150 deletions(-)
>
> diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c
> index 3cd6e75..87fc1d0 100644
> --- a/drivers/video/backlight/qcom-wled.c
> +++ b/drivers/video/backlight/qcom-wled.c
> @@ -15,59 +15,71 @@
> #include <linux/module.h>
> #include <linux/of.h>
> #include <linux/of_device.h>
> +#include <linux/of_address.h>
> #include <linux/regmap.h>
>
> /* From DT binding */
> +#define WLED_MAX_STRINGS 4
> +
> #define WLED_DEFAULT_BRIGHTNESS 2048
>
> -#define WLED3_SINK_REG_BRIGHT_MAX 0xFFF
> -#define WLED3_CTRL_REG_VAL_BASE 0x40
> +#define WLED_SINK_REG_BRIGHT_MAX 0xFFF
>
> -/* WLED3 control registers */
> -#define WLED3_CTRL_REG_MOD_EN 0x46
> -#define WLED3_CTRL_REG_MOD_EN_BIT BIT(7)
> -#define WLED3_CTRL_REG_MOD_EN_MASK BIT(7)
> +/* WLED control registers */
> +#define WLED_CTRL_REG_MOD_EN 0x46
> +#define WLED_CTRL_REG_MOD_EN_MASK BIT(7)
> +#define WLED_CTRL_REG_MOD_EN_SHIFT 7
>
> -#define WLED3_CTRL_REG_FREQ 0x4c
> -#define WLED3_CTRL_REG_FREQ_MASK 0x0f
> +#define WLED_CTRL_REG_FREQ 0x4c
> +#define WLED_CTRL_REG_FREQ_MASK GENMASK(3, 0)
>
> -#define WLED3_CTRL_REG_OVP 0x4d
> -#define WLED3_CTRL_REG_OVP_MASK 0x03
> +#define WLED_CTRL_REG_OVP 0x4d
> +#define WLED_CTRL_REG_OVP_MASK GENMASK(1, 0)
>
> -#define WLED3_CTRL_REG_ILIMIT 0x4e
> -#define WLED3_CTRL_REG_ILIMIT_MASK 0x07
> +#define WLED_CTRL_REG_ILIMIT 0x4e
> +#define WLED_CTRL_REG_ILIMIT_MASK GENMASK(2, 0)
>
> -/* WLED3 sink registers */
> -#define WLED3_SINK_REG_SYNC 0x47
> -#define WLED3_SINK_REG_SYNC_MASK 0x07
> -#define WLED3_SINK_REG_SYNC_LED1 BIT(0)
> -#define WLED3_SINK_REG_SYNC_LED2 BIT(1)
> -#define WLED3_SINK_REG_SYNC_LED3 BIT(2)
> -#define WLED3_SINK_REG_SYNC_ALL 0x07
> -#define WLED3_SINK_REG_SYNC_CLEAR 0x00
> +/* WLED sink registers */
> +#define WLED_SINK_REG_SYNC 0x47
> +#define WLED_SINK_REG_SYNC_CLEAR 0x00
>
> #define WLED3_SINK_REG_CURR_SINK 0x4f
> -#define WLED3_SINK_REG_CURR_SINK_MASK 0xe0
> -#define WLED3_SINK_REG_CURR_SINK_SHFT 0x05
> +#define WLED3_SINK_REG_CURR_SINK_MASK GENMASK(7, 5)
> +#define WLED3_SINK_REG_CURR_SINK_SHFT 5
>
> -/* WLED3 per-'string' registers below */
> -#define WLED3_SINK_REG_STR_OFFSET 0x10
> +/* WLED3 specific per-'string' registers below */
> +#define WLED3_SINK_REG_BRIGHT(n) (0x40 + n)
>
> -#define WLED3_SINK_REG_STR_MOD_EN_BASE 0x60
> +#define WLED3_SINK_REG_STR_MOD_EN(n) (0x60 + (n * 0x10))
> #define WLED3_SINK_REG_STR_MOD_MASK BIT(7)
> -#define WLED3_SINK_REG_STR_MOD_EN BIT(7)
>
> -#define WLED3_SINK_REG_STR_FULL_SCALE_CURR 0x62
> -#define WLED3_SINK_REG_STR_FULL_SCALE_CURR_MASK 0x1f
> +#define WLED3_SINK_REG_STR_FULL_SCALE_CURR(n) (0x62 + (n * 0x10))
> +#define WLED3_SINK_REG_STR_FULL_SCALE_CURR_MASK GENMASK(4, 0)
>
> -#define WLED3_SINK_REG_STR_MOD_SRC_BASE 0x63
> -#define WLED3_SINK_REG_STR_MOD_SRC_MASK 0x01
> +#define WLED3_SINK_REG_STR_MOD_SRC(n) (0x63 + (n * 0x10))
> +#define WLED3_SINK_REG_STR_MOD_SRC_MASK BIT(0)
> #define WLED3_SINK_REG_STR_MOD_SRC_INT 0x00
> #define WLED3_SINK_REG_STR_MOD_SRC_EXT 0x01
>
> -#define WLED3_SINK_REG_STR_CABC_BASE 0x66
> +#define WLED3_SINK_REG_STR_CABC(n) (0x66 + (n * 0x10))
> #define WLED3_SINK_REG_STR_CABC_MASK BIT(7)
> -#define WLED3_SINK_REG_STR_CABC_EN BIT(7)
> +
> +struct wled_var_cfg {
> + const u32 *values;
> + u32 (*fn)(u32);
> + int size;
> +};
> +
> +struct wled_u32_opts {
> + const char *name;
> + u32 *val_ptr;
> + const struct wled_var_cfg *cfg;
> +};
> +
> +struct wled_bool_opts {
> + const char *name;
> + bool *val_ptr;
> +};
>
> struct wled_config {
> u32 boost_i_limit;
> @@ -75,132 +87,179 @@ struct wled_config {
> u32 switch_freq;
> u32 num_strings;
> u32 string_i_limit;
> + u32 enabled_strings[WLED_MAX_STRINGS];
> bool cs_out_en;
> bool ext_gen;
> - bool cabc_en;
> + bool cabc;
> };
>
> struct wled {
> const char *name;
> + struct device *dev;
> struct regmap *regmap;
> - u16 addr;
> + u16 ctrl_addr;
> + u16 max_string_count;
> + u32 brightness;
> + u32 max_brightness;
>
> struct wled_config cfg;
> + int (*wled_set_brightness)(struct wled *wled, u16 brightness);
> };
>
> +static int wled3_set_brightness(struct wled *wled, u16 brightness)
> +{
> + int rc, i;
> + u8 v[2];
> +
> + v[0] = brightness & 0xff;
> + v[1] = (brightness >> 8) & 0xf;
> +
> + for (i = 0; i < wled->cfg.num_strings; ++i) {
> + rc = regmap_bulk_write(wled->regmap, wled->ctrl_addr +
> + WLED3_SINK_REG_BRIGHT(i), v, 2);
> + if (rc < 0)
> + return rc;
> + }
> +
> + return 0;
> +}
> +
> +static int wled_module_enable(struct wled *wled, int val)
> +{
> + int rc;
> +
> + rc = regmap_update_bits(wled->regmap, wled->ctrl_addr +
> + WLED_CTRL_REG_MOD_EN,
> + WLED_CTRL_REG_MOD_EN_MASK,
> + val << WLED_CTRL_REG_MOD_EN_SHIFT);
> + return rc;
> +}
> +
> +static int wled_sync_toggle(struct wled *wled)
> +{
> + int rc;
> + unsigned int mask = GENMASK(wled->max_string_count - 1, 0);
> +
> + rc = regmap_update_bits(wled->regmap,
> + wled->ctrl_addr + WLED_SINK_REG_SYNC,
> + mask, mask);
> + if (rc < 0)
> + return rc;
> +
> + rc = regmap_update_bits(wled->regmap,
> + wled->ctrl_addr + WLED_SINK_REG_SYNC,
> + mask, WLED_SINK_REG_SYNC_CLEAR);
> +
> + return rc;
> +}
> +
> static int wled_update_status(struct backlight_device *bl)
> {
> struct wled *wled = bl_get_data(bl);
> - u16 val = bl->props.brightness;
> - u8 ctrl = 0;
> - int rc;
> - int i;
> + u16 brightness = bl->props.brightness;
> + int rc = 0;
>
> if (bl->props.power != FB_BLANK_UNBLANK ||
> bl->props.fb_blank != FB_BLANK_UNBLANK ||
> bl->props.state & BL_CORE_FBBLANK)
> - val = 0;
> -
> - if (val != 0)
> - ctrl = WLED3_CTRL_REG_MOD_EN_BIT;
> + brightness = 0;
>
> - rc = regmap_update_bits(wled->regmap,
> - wled->addr + WLED3_CTRL_REG_MOD_EN,
> - WLED3_CTRL_REG_MOD_EN_MASK, ctrl);
> - if (rc)
> - return rc;
> + if (brightness) {
> + rc = wled->wled_set_brightness(wled, brightness);
> + if (rc < 0) {
> + dev_err(wled->dev, "wled failed to set brightness rc:%d\n",
> + rc);
> + return rc;
> + }
>
> - for (i = 0; i < wled->cfg.num_strings; ++i) {
> - u8 v[2] = { val & 0xff, (val >> 8) & 0xf };
> + rc = wled_sync_toggle(wled);
> + if (rc < 0) {
> + dev_err(wled->dev, "wled sync failed rc:%d\n", rc);
> + return rc;
> + }
> + }
>
> - rc = regmap_bulk_write(wled->regmap,
> - wled->addr + WLED3_CTRL_REG_VAL_BASE + 2 * i,
> - v, 2);
> - if (rc)
> + if (!!brightness != !!wled->brightness) {
> + rc = wled_module_enable(wled, !!brightness);
> + if (rc < 0) {
> + dev_err(wled->dev, "wled enable failed rc:%d\n", rc);
> return rc;
> + }
> }
>
> - rc = regmap_update_bits(wled->regmap,
> - wled->addr + WLED3_SINK_REG_SYNC,
> - WLED3_SINK_REG_SYNC_MASK, WLED3_SINK_REG_SYNC_ALL);
> - if (rc)
> - return rc;
> + wled->brightness = brightness;
>
> - rc = regmap_update_bits(wled->regmap,
> - wled->addr + WLED3_SINK_REG_SYNC,
> - WLED3_SINK_REG_SYNC_MASK, WLED3_SINK_REG_SYNC_CLEAR);
> return rc;
> }
>
> -static int wled_setup(struct wled *wled)
> +static int wled3_setup(struct wled *wled)
> {
> - int rc;
> - int i;
> + u16 addr;
> + u8 sink_en = 0;
> + int rc, i, j;
>
> rc = regmap_update_bits(wled->regmap,
> - wled->addr + WLED3_CTRL_REG_OVP,
> - WLED3_CTRL_REG_OVP_MASK, wled->cfg.ovp);
> + wled->ctrl_addr + WLED_CTRL_REG_OVP,
> + WLED_CTRL_REG_OVP_MASK, wled->cfg.ovp);
> if (rc)
> return rc;
>
> rc = regmap_update_bits(wled->regmap,
> - wled->addr + WLED3_CTRL_REG_ILIMIT,
> - WLED3_CTRL_REG_ILIMIT_MASK, wled->cfg.boost_i_limit);
> + wled->ctrl_addr + WLED_CTRL_REG_ILIMIT,
> + WLED_CTRL_REG_ILIMIT_MASK,
> + wled->cfg.boost_i_limit);
> if (rc)
> return rc;
>
> rc = regmap_update_bits(wled->regmap,
> - wled->addr + WLED3_CTRL_REG_FREQ,
> - WLED3_CTRL_REG_FREQ_MASK, wled->cfg.switch_freq);
> + wled->ctrl_addr + WLED_CTRL_REG_FREQ,
> + WLED_CTRL_REG_FREQ_MASK,
> + wled->cfg.switch_freq);
> if (rc)
> return rc;
>
> - if (wled->cfg.cs_out_en) {
> - u8 all = (BIT(wled->cfg.num_strings) - 1)
> - << WLED3_SINK_REG_CURR_SINK_SHFT;
> -
> - rc = regmap_update_bits(wled->regmap,
> - wled->addr + WLED3_SINK_REG_CURR_SINK,
> - WLED3_SINK_REG_CURR_SINK_MASK, all);
> - if (rc)
> - return rc;
> - }
> -
> for (i = 0; i < wled->cfg.num_strings; ++i) {
> - u16 addr = wled->addr + WLED3_SINK_REG_STR_OFFSET * i;
> -
> - rc = regmap_update_bits(wled->regmap,
> - addr + WLED3_SINK_REG_STR_MOD_EN_BASE,
> - WLED3_SINK_REG_STR_MOD_MASK,
> - WLED3_SINK_REG_STR_MOD_EN);
> + j = wled->cfg.enabled_strings[i];
> + addr = wled->ctrl_addr + WLED3_SINK_REG_STR_MOD_EN(j);
> + rc = regmap_update_bits(wled->regmap, addr,
> + WLED3_SINK_REG_STR_MOD_MASK,
> + WLED3_SINK_REG_STR_MOD_MASK);
> if (rc)
> return rc;
>
> if (wled->cfg.ext_gen) {
> - rc = regmap_update_bits(wled->regmap,
> - addr + WLED3_SINK_REG_STR_MOD_SRC_BASE,
> - WLED3_SINK_REG_STR_MOD_SRC_MASK,
> - WLED3_SINK_REG_STR_MOD_SRC_EXT);
> + addr = wled->ctrl_addr + WLED3_SINK_REG_STR_MOD_SRC(j);
> + rc = regmap_update_bits(wled->regmap, addr,
> + WLED3_SINK_REG_STR_MOD_SRC_MASK,
> + WLED3_SINK_REG_STR_MOD_SRC_EXT);
> if (rc)
> return rc;
> }
>
> - rc = regmap_update_bits(wled->regmap,
> - addr + WLED3_SINK_REG_STR_FULL_SCALE_CURR,
> - WLED3_SINK_REG_STR_FULL_SCALE_CURR_MASK,
> - wled->cfg.string_i_limit);
> + addr = wled->ctrl_addr + WLED3_SINK_REG_STR_FULL_SCALE_CURR(j);
> + rc = regmap_update_bits(wled->regmap, addr,
> + WLED3_SINK_REG_STR_FULL_SCALE_CURR_MASK,
> + wled->cfg.string_i_limit);
> if (rc)
> return rc;
>
> - rc = regmap_update_bits(wled->regmap,
> - addr + WLED3_SINK_REG_STR_CABC_BASE,
> - WLED3_SINK_REG_STR_CABC_MASK,
> - wled->cfg.cabc_en ?
> - WLED3_SINK_REG_STR_CABC_EN : 0);
> + addr = wled->ctrl_addr + WLED3_SINK_REG_STR_CABC(j);
> + rc = regmap_update_bits(wled->regmap, addr,
> + WLED3_SINK_REG_STR_CABC_MASK,
> + wled->cfg.cabc ?
> + WLED3_SINK_REG_STR_CABC_MASK : 0);
> if (rc)
> return rc;
> +
> + sink_en |= BIT(j + WLED3_SINK_REG_CURR_SINK_SHFT);
> }
>
> + rc = regmap_update_bits(wled->regmap,
> + wled->ctrl_addr + WLED3_SINK_REG_CURR_SINK,
> + WLED3_SINK_REG_CURR_SINK_MASK, sink_en);
> + if (rc)
> + return rc;
> +
> return 0;
> }
>
> @@ -208,17 +267,11 @@ static int wled_setup(struct wled *wled)
> .boost_i_limit = 3,
> .string_i_limit = 20,
> .ovp = 2,
> + .num_strings = 3,
> .switch_freq = 5,
> - .num_strings = 0,
> .cs_out_en = false,
> .ext_gen = false,
> - .cabc_en = false,
> -};
> -
> -struct wled_var_cfg {
> - const u32 *values;
> - u32 (*fn)(u32);
> - int size;
> + .cabc = false,
> };
>
> static const u32 wled3_boost_i_limit_values[] = {
> @@ -263,7 +316,11 @@ static u32 wled3_switch_freq_values_fn(u32 idx)
> .size = 26,
> };
>
> -static u32 wled3_values(const struct wled_var_cfg *cfg, u32 idx)
> +static const struct wled_var_cfg wled3_string_cfg = {
> + .size = 8,
> +};
> +
> +static u32 wled_values(const struct wled_var_cfg *cfg, u32 idx)
> {
> if (idx >= cfg->size)
> return UINT_MAX;
> @@ -274,68 +331,77 @@ static u32 wled3_values(const struct wled_var_cfg *cfg, u32 idx)
> return idx;
> }
>
> -static int wled_configure(struct wled *wled, struct device *dev)
> +#define WLED3 3
> +
> +static int wled_configure(struct wled *wled, int version)
> {
> struct wled_config *cfg = &wled->cfg;
> - u32 val;
> - int rc;
> - u32 c;
> - int i;
> - int j;
> -
> - const struct {
> - const char *name;
> - u32 *val_ptr;
> - const struct wled_var_cfg *cfg;
> - } u32_opts[] = {
> + struct device *dev = wled->dev;
> + const __be32 *prop_addr;
> + u32 size, val, c, string_len;
> + int rc, i, j;
> +
> + const struct wled_u32_opts *u32_opts = NULL;
> + const struct wled_u32_opts wled3_opts[] = {
> {
> - "qcom,current-boost-limit",
> - &cfg->boost_i_limit,
> + .name = "qcom,current-boost-limit",
> + .val_ptr = &cfg->boost_i_limit,
> .cfg = &wled3_boost_i_limit_cfg,
> },
> {
> - "qcom,current-limit",
> - &cfg->string_i_limit,
> + .name = "qcom,current-limit",
> + .val_ptr = &cfg->string_i_limit,
> .cfg = &wled3_string_i_limit_cfg,
> },
> {
> - "qcom,ovp",
> - &cfg->ovp,
> + .name = "qcom,ovp",
> + .val_ptr = &cfg->ovp,
> .cfg = &wled3_ovp_cfg,
> },
> {
> - "qcom,switching-freq",
> - &cfg->switch_freq,
> + .name = "qcom,switching-freq",
> + .val_ptr = &cfg->switch_freq,
> .cfg = &wled3_switch_freq_cfg,
> },
> {
> - "qcom,num-strings",
> - &cfg->num_strings,
> + .name = "qcom,num-strings",
> + .val_ptr = &cfg->num_strings,
> .cfg = &wled3_num_strings_cfg,
> },
> };
> - const struct {
> - const char *name;
> - bool *val_ptr;
> - } bool_opts[] = {
> +
> + const struct wled_bool_opts bool_opts[] = {
> { "qcom,cs-out", &cfg->cs_out_en, },
> { "qcom,ext-gen", &cfg->ext_gen, },
> - { "qcom,cabc", &cfg->cabc_en, },
> + { "qcom,cabc", &cfg->cabc, },
> };
>
> - rc = of_property_read_u32(dev->of_node, "reg", &val);
> - if (rc || val > 0xffff) {
> - dev_err(dev, "invalid IO resources\n");
> - return rc ? rc : -EINVAL;
> + prop_addr = of_get_address(dev->of_node, 0, NULL, NULL);
> + if (!prop_addr) {
> + dev_err(wled->dev, "invalid IO resources\n");
> + return -EINVAL;
> }
> - wled->addr = val;
> + wled->ctrl_addr = be32_to_cpu(*prop_addr);
>
> rc = of_property_read_string(dev->of_node, "label", &wled->name);
> if (rc)
> wled->name = dev->of_node->name;
>
> - *cfg = wled3_config_defaults;
> - for (i = 0; i < ARRAY_SIZE(u32_opts); ++i) {
> + switch (version) {
> + case WLED3:
> + u32_opts = wled3_opts;
> + size = ARRAY_SIZE(wled3_opts);
> + *cfg = wled3_config_defaults;
> + wled->wled_set_brightness = wled3_set_brightness;
> + wled->max_string_count = 3;
> + break;
> +
> + default:
> + dev_err(wled->dev, "Invalid WLED version\n");
> + break;
> + }
> +
> + for (i = 0; i < size; ++i) {
> rc = of_property_read_u32(dev->of_node, u32_opts[i].name, &val);
> if (rc == -EINVAL) {
> continue;
> @@ -346,12 +412,15 @@ static int wled_configure(struct wled *wled, struct device *dev)
>
> c = UINT_MAX;
> for (j = 0; c != val; j++) {
> - c = wled3_values(u32_opts[i].cfg, j);
> + c = wled_values(u32_opts[i].cfg, j);
> if (c == UINT_MAX) {
> dev_err(dev, "invalid value for '%s'\n",
> u32_opts[i].name);
> return -EINVAL;
> }
> +
> + if (c == val)
> + break;
> }
>
> dev_dbg(dev, "'%s' = %u\n", u32_opts[i].name, c);
> @@ -365,6 +434,15 @@ static int wled_configure(struct wled *wled, struct device *dev)
>
> cfg->num_strings = cfg->num_strings + 1;
>
> + string_len = of_property_count_elems_of_size(dev->of_node,
> + "qcom,enabled-strings",
> + sizeof(u32));
> + if (string_len > 0)
> + rc = of_property_read_u32_array(dev->of_node,
> + "qcom,enabled-strings",
> + wled->cfg.enabled_strings,
> + sizeof(u32));
> +
> return 0;
> }
>
> @@ -378,6 +456,7 @@ static int wled_probe(struct platform_device *pdev)
> struct backlight_device *bl;
> struct wled *wled;
> struct regmap *regmap;
> + int version;
> u32 val;
> int rc;
>
> @@ -392,22 +471,39 @@ static int wled_probe(struct platform_device *pdev)
> return -ENOMEM;
>
> wled->regmap = regmap;
> + wled->dev = &pdev->dev;
>
> - rc = wled_configure(wled, &pdev->dev);
> - if (rc)
> - return rc;
> + version = (uintptr_t)of_device_get_match_data(&pdev->dev);
> + if (!version) {
> + dev_err(&pdev->dev, "Unknown device version\n");
> + return -ENODEV;
> + }
>
> - rc = wled_setup(wled);
> + rc = wled_configure(wled, version);
> if (rc)
> return rc;
>
> + switch (version) {
> + case WLED3:
> + rc = wled3_setup(wled);
> + if (rc) {
> + dev_err(&pdev->dev, "wled3_setup failed\n");
> + return rc;
> + }
> + break;
> +
> + default:
> + dev_err(wled->dev, "Invalid WLED version\n");
> + break;
> + }
> +
> val = WLED_DEFAULT_BRIGHTNESS;
> of_property_read_u32(pdev->dev.of_node, "default-brightness", &val);
>
> memset(&props, 0, sizeof(struct backlight_properties));
> props.type = BACKLIGHT_RAW;
> props.brightness = val;
> - props.max_brightness = WLED3_SINK_REG_BRIGHT_MAX;
> + props.max_brightness = WLED_SINK_REG_BRIGHT_MAX;
> bl = devm_backlight_device_register(&pdev->dev, wled->name,
> &pdev->dev, wled,
> &wled_ops, &props);
> @@ -415,7 +511,7 @@ static int wled_probe(struct platform_device *pdev)
> };
>
> static const struct of_device_id wled_match_table[] = {
> - { .compatible = "qcom,pm8941-wled" },
> + { .compatible = "qcom,pm8941-wled", .data = (void *)3 },
> {}
> };
> MODULE_DEVICE_TABLE(of, wled_match_table);
>

\
 
 \ /
  Last update: 2018-07-20 15:41    [W:0.215 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site