lkml.org 
[lkml]   [2018]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v6 0/4] add support for Bluetooth on MT7622 SoC
Date
From: Sean Wang <sean.wang@mediatek.com>

v6 and changes since v5:
- make btmtkuart become a separate driver.
- drop already applied patches and the patch for btuart driver
- refine comments in driver allowing people know that mtk extra header
+ length doesn't indicate a full H:4 frame, things can fragment.
- enhance dt-binding document with removing mistaken added " and improve
English sentence.
- remove unnecessary '\n' with bt_dev_err.
- refine code style.
- set hdev->manufacturer as mtk id.

v5 and changes since v4:
- add Reviewed-by Tag from Ulf Hansson for patch 2
- remove default y in Kconfig for btmtkuart selection to avoid overkill for
users which would like to have less an amount on stuff in kernel.
- list header declarations in alphabetical order and add a proper blank line
within.
- remove unused macro.
- use sizeof to calculate structure size instead of an aextra macro to hardcode.
- use struct hci_dev * as input paraments for mtk_hci_wmt_sync and mtk_setup_fw
for that can be reused in mtk bluetooth with other interfaces.
- remove unused local variabled in mtk_btuart_recv.
- remove superfluous :8 for dlen2 in struct mtk_stp_hdr definition.
- give a reasonable naming for these labels and add a pm_runtime_put_noidle()
in the path undoing failing pm_runtime_get_sync().
- Turn __u8 into u8 in struct mtk_stp_hdr.

Really thanks for these reviews by Johan Hovold and Andy Shevchenko

v4 and changes since v3:
- refine patch 2 based on commit 919b7308fcc4 to allow that
dev_pm_domain_attach() will return better error codes.

v3 and changes since v2
* all changes happen on patch 6
- fix up SPDX license style for btmtkuart.h.
- change firmware download from in ACL data to in HCI commands
and then remove unused mtk_acl_wmt_sync and related code.
- add a workaround replacing bad vendor event id 0xe4 with 0xff every
vendor should use.
- add a sanity check for mtk_hci_wmt_sync to verifying if
input parameters are valid.
- add an atomic_inc(&bdev->hdev->cmd_cnt) for __hci_cmd_sync_ev.
- be changed to use firmware with a header called mt7622pr2h.bin.

v2 and changes since v1
- Dropped patches already being applied
- Rewirte the whole driver using btuart [1], and add slight extension
of btuart to fit into btmtkuart driver. Beware that [1] is also pulled
into one part of the series for avoiding any breakage when the patchset
is being compiled.

[1] btuart
https://www.spinics.net/lists/linux-bluetooth/msg74918.html

v1:

Hi,

This patchset introduces built-in Bluetooth support on MT7622 SoC.
And, it should be simple to make an extension to support other
MediaTek SoCs with adjusting a few of changes on the initialization
sequence of the device.

Before the main driver is being introduced, a few of things about
power-domain management should be re-worked for serdev core and MediaTek
SCPSYS to allow the Bluetooth to properly power up.

Patch 2: add a generic way attaching power domain to serdev
Patch 3 and 4: add cleanups with reuse APIs from Linux core
Patch 5: fix a limitation about power enablement Bluetooth depends on
Patch 1, 6 and 7: the major part of adding Bluetooth support to MT7622

Sean

Sean Wang (4):
dt-bindings: net: bluetooth: Add mediatek-bluetooth
Bluetooth: Add new quirk for non-persistent setup settings
Bluetooth: mediatek: Add protocol support for MediaTek serial devices
MAINTAINERS: add an entry for MediaTek Bluetooth driver

.../devicetree/bindings/net/mediatek-bluetooth.txt | 35 ++
MAINTAINERS | 8 +
drivers/bluetooth/Kconfig | 11 +
drivers/bluetooth/Makefile | 2 +
drivers/bluetooth/btmtkuart.c | 552 +++++++++++++++++++++
drivers/bluetooth/btmtkuart.h | 83 ++++
include/net/bluetooth/hci.h | 9 +
net/bluetooth/hci_core.c | 3 +-
8 files changed, 702 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/net/mediatek-bluetooth.txt
create mode 100644 drivers/bluetooth/btmtkuart.c
create mode 100644 drivers/bluetooth/btmtkuart.h

--
2.7.4

\
 
 \ /
  Last update: 2018-07-20 07:13    [W:0.240 / U:14.668 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site