[lkml]   [2018]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH 0/7] Tegra SDHCI enable 1.8 V signaling on Tegar210 and Tegra186
Reconfigure pad voltages as part of mmc voltage switching on
controllers with adjustable voltages. Allow for reconfiguration of the
signaling voltage of SDMMC1 on Tegra210 P2597 and fix SDMMC4 signaling
voltage regulator configuration on Tegra210 P2180.

This series depends on the "Tegra PMC pinctrl pad configuration" series posted

Aapo Vienamo (7):
dt-bindings: Document Tegra SDHCI pinctrl bindings
mmc: tegra: Reconfigure pad voltages during voltage switching
arm64: dts: Add Tegra210 sdmmc pinctrl voltage states
arm64: dts: Add Tegra186 sdmmc pinctrl voltage states
arm64: dts: tegra210-p2180: Allow ldo2 to go down to 1.8 V
arm64: dts: tegra210-p2180: Correct sdmmc4 vqmmc-supply
arm64: dts: tegra210-p2597: Remove no-1-8-v from sdmmc1

.../bindings/mmc/nvidia,tegra20-sdhci.txt | 22 ++++++
arch/arm64/boot/dts/nvidia/tegra186.dtsi | 40 ++++++++++
arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi | 12 +--
arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 1 -
arch/arm64/boot/dts/nvidia/tegra210.dtsi | 27 +++++++
drivers/mmc/host/sdhci-tegra.c | 91 ++++++++++++++++++++--
6 files changed, 176 insertions(+), 17 deletions(-)


 \ /
  Last update: 2018-07-20 14:48    [W:0.289 / U:4.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site