lkml.org 
[lkml]   [2018]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/8] usb: typec: mux: Get the mux identifier from function parameter
On Mon, Jul 09, 2018 at 12:03:10PM -0700, Guenter Roeck wrote:
> On Thu, Jun 28, 2018 at 02:34:27PM +0300, Heikki Krogerus wrote:
> > On Thu, Jun 28, 2018 at 07:51:55PM +0900, Greg Kroah-Hartman wrote:
> > > On Wed, Jun 27, 2018 at 06:19:48PM +0300, Heikki Krogerus wrote:
> > > > In order for the muxes to be usable with alternate modes,
> > > > the alternate mode devices will need also to be able to get
> > > > a handle to the muxes on top of the port devices. To make
> > > > that possible, the muxes need to be possible to request with
> > > > an identifier.
> > > >
> > > > This will change the API so that the mux identifier is given
> > > > as a function parameter to typec_mux_get(), and the hard-coded
> > > > "typec-mux" is replaced with that value.
> > > >
> > > > Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> > > > ---
> > > > drivers/usb/typec/class.c | 2 +-
> > > > drivers/usb/typec/mux.c | 6 +++---
> > > > include/linux/usb/typec_mux.h | 2 +-
> > > > 3 files changed, 5 insertions(+), 5 deletions(-)
> > > >
> > > > diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c
> > > > index 2b3eaa969f3b..b860bd3a0acb 100644
> > > > --- a/drivers/usb/typec/class.c
> > > > +++ b/drivers/usb/typec/class.c
> > > > @@ -1357,7 +1357,7 @@ struct typec_port *typec_register_port(struct device *parent,
> > > > goto err_switch;
> > > > }
> > > >
> > > > - port->mux = typec_mux_get(cap->fwnode ? &port->dev : parent);
> > > > + port->mux = typec_mux_get(parent, "typec-mux");
> > >
> > > This changes the first parameter for this call, is that ok? Doesn't
> > > that change the functionality here?
> >
> > No, I noticed that cap->fwnode is set after we call that function, so
> > we always ended up using parent.
> >
> > This needs to be fixed properly of course, but I choose not to propose
> > anything in this series. We don't yet use the fwnode handle with the
> > muxes in any case, as the device connection API does not support
> > anything else except build-in connections descriptions for now.
> >
>
> Seems to me that would be better handled in a separate patch or patch
> series. With this patch, the code ends up always using parent here but
> there is still
> port->sw = typec_switch_get(cap->fwnode ? &port->dev : parent);
> a couple of lines above. This is at the very least confusing to the
> reader.

True. I'll refactor this function a little in a separate patch. But
not right away. I still have one week of vacation.


Thanks,

--
heikki

\
 
 \ /
  Last update: 2018-07-20 12:55    [W:0.071 / U:0.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site