lkml.org 
[lkml]   [2018]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH V2] Add SPI driver support for GENI based QUP
Hi,

On Fri, Jul 20, 2018 at 4:50 AM, Dilip Kota <dkota@codeaurora.org> wrote:
> This patch series adds SPI driver support for GENI based QUP.
> Also adding the device tree binding document for reference
> as per reviewers request which was merged in Linus tree.
>
> Girish Mahadevan (1):
> spi: spi-geni-qcom: Add SPI driver support for GENI based QUP
>
> drivers/spi/Kconfig | 12 +
> drivers/spi/Makefile | 1 +
> drivers/spi/spi-geni-qcom.c | 685 ++++++++++++++++++++++++++++++++++++++
> include/linux/spi/spi-geni-qcom.h | 14 +
> 4 files changed, 712 insertions(+)
> create mode 100644 drivers/spi/spi-geni-qcom.c
> create mode 100644 include/linux/spi/spi-geni-qcom.h

This looks like it was supposed to be a cover letter. Typically
that's labelled as "patch 0" in the series. Other handy traditions:

* The cover letter should contain a description of what changed
between this patch and the last one

* You only want a cover letter for a patch series with more than one
patch in it. In your case you only have one patch so you should have
no cover letter.

* It's handy if your cover letter has prefixes that match the
subsystem just like the patch itself. AKA: "spi: spi-geni-qcom:"


Personally I use "patman" to help me with sending out my patches. See
<https://github.com/u-boot/u-boot/tree/master/tools/patman>.


-Doug

\
 
 \ /
  Last update: 2018-07-20 23:13    [W:0.070 / U:1.716 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site