lkml.org 
[lkml]   [2018]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/2] clk: meson: Add vid_pll divider driver
Hi Neil,

On Fri, Jul 20, 2018 at 11:40 AM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> Add support the VID_PLL fully programmable divider used right after the
> HDMI PLL clock source. It is used to achieve complex fractional division
> with a programmble bitfield.
I assume you have no other information that the S912 datasheet, pages
64 and 77 which describe the HHI_VID_PLL_CLK_DIV register?

more comments inline

> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>
> ---
> drivers/clk/meson/Makefile | 2 +-
> drivers/clk/meson/clkc.h | 6 +++
> drivers/clk/meson/vid-pll-div.c | 90 +++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 97 insertions(+), 1 deletion(-)
> create mode 100644 drivers/clk/meson/vid-pll-div.c
>
> diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
> index 72ec8c4..0234767 100644
> --- a/drivers/clk/meson/Makefile
> +++ b/drivers/clk/meson/Makefile
> @@ -2,7 +2,7 @@
> # Makefile for Meson specific clk
> #
>
> -obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-mpll.o clk-phase.o
> +obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-mpll.o clk-phase.o vid-pll-div.o
> obj-$(CONFIG_COMMON_CLK_AMLOGIC_AUDIO) += clk-triphase.o sclk-div.o
> obj-$(CONFIG_COMMON_CLK_MESON_AO) += meson-aoclk.o
> obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
> diff --git a/drivers/clk/meson/clkc.h b/drivers/clk/meson/clkc.h
> index 6b96d55..9166605 100644
> --- a/drivers/clk/meson/clkc.h
> +++ b/drivers/clk/meson/clkc.h
> @@ -90,6 +90,11 @@ struct meson_clk_phase_data {
> int meson_clk_degrees_from_val(unsigned int val, unsigned int width);
> unsigned int meson_clk_degrees_to_val(int degrees, unsigned int width);
>
> +struct meson_vid_pll_div_data {
> + struct parm val;
> + struct parm sel;
> +};
> +
> #define MESON_GATE(_name, _reg, _bit) \
> struct clk_regmap _name = { \
> .data = &(struct clk_regmap_gate_data){ \
> @@ -112,5 +117,6 @@ extern const struct clk_ops meson_clk_cpu_ops;
> extern const struct clk_ops meson_clk_mpll_ro_ops;
> extern const struct clk_ops meson_clk_mpll_ops;
> extern const struct clk_ops meson_clk_phase_ops;
> +extern const struct clk_ops meson_vid_pll_div_ro_ops;
>
> #endif /* __CLKC_H */
> diff --git a/drivers/clk/meson/vid-pll-div.c b/drivers/clk/meson/vid-pll-div.c
> new file mode 100644
> index 0000000..5f267be
> --- /dev/null
> +++ b/drivers/clk/meson/vid-pll-div.c
> @@ -0,0 +1,90 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2018 BayLibre, SAS.
> + * Author: Neil Armstrong <narmstrong@baylibre.com>
> + */
> +
> +#include <linux/clk-provider.h>
> +#include "clkc.h"
> +
> +static inline struct meson_vid_pll_div_data *
> +meson_vid_pll_div_data(struct clk_regmap *clk)
> +{
> + return (struct meson_vid_pll_div_data *)clk->data;
> +}
> +
> +/*
> + * This vid_pll divided is a fully programmable fractionnal divider to
> + * achieve complex video clock rates.
> + *
> + * Here are provided the commonly used fraction values provided by Amlogic.
> + */
> +
> +struct vid_pll_div {
> + unsigned int shift_val;
> + unsigned int shift_sel;
> + unsigned int frac_top;
maybe call it divider?

> + unsigned int frac_bot;
maybe call it multiplier?

> +};
> +
> +#define VID_PLL_DIV(_val, _sel, _ft, _fb) \
> + { \
> + .shift_val = (_val), \
> + .shift_sel = (_sel), \
> + .frac_top = (_ft), \
> + .frac_bot = (_fb), \
> + }
> +
> +static const struct vid_pll_div vid_pll_div_table[] = {
> + VID_PLL_DIV(0x0aaa, 0, 2, 1), /* 2/1 => /2 */
> + VID_PLL_DIV(0x5294, 2, 5, 2), /* 5/2 => /2.5 */
> + VID_PLL_DIV(0x0db6, 0, 3, 1), /* 3/1 => /3 */
> + VID_PLL_DIV(0x36cc, 1, 7, 2), /* 7/2 => /3.5 */
> + VID_PLL_DIV(0x6666, 2, 15, 4), /* 15/4 => /3.75 */
> + VID_PLL_DIV(0x0ccc, 4, 4, 1), /* 4/1 => /4 */
is the shift_sel (second parameter) correct here? the public S912
datasheet, page 77 states that CLK_SEL is only 2 bit wide (and "4"
exceeds that)

> + VID_PLL_DIV(0x739c, 2, 5, 1), /* 5/1 => /5 */
> + VID_PLL_DIV(0x0e38, 0, 6, 1), /* 6/1 => /6 */
> + VID_PLL_DIV(0x0000, 3, 25, 4), /* 25/4 => /6.25 */
> + VID_PLL_DIV(0x3c78, 1, 7, 1), /* 7/1 => /7 */
> + VID_PLL_DIV(0x78f0, 2, 15, 2), /* 15/2 => /7.5 */
> + VID_PLL_DIV(0x0fc0, 0, 12, 1), /* 12/1 => /12 */
> + VID_PLL_DIV(0x3f80, 1, 14, 1), /* 14/1 => /14 */
> + VID_PLL_DIV(0x7f80, 2, 15, 1), /* 15/1 => /15 */
> +};
> +
> +#define to_meson_vid_pll_div(_hw) container_of(_hw, struct meson_vid_pll_div, hw)
> +
> +const struct vid_pll_div *_get_table_val(unsigned int shift_val,
> + unsigned int shift_sel)
> +{
> + int i;
> +
> + for (i = 0 ; i < ARRAY_SIZE(vid_pll_div_table) ; ++i) {
> + if (vid_pll_div_table[i].shift_val == shift_val &&
> + vid_pll_div_table[i].shift_sel == shift_sel)
> + return &vid_pll_div_table[i];
> + }
> +
> + return NULL;
> +}
> +
> +static unsigned long meson_vid_pll_div_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + struct clk_regmap *clk = to_clk_regmap(hw);
> + struct meson_vid_pll_div_data *pll_div = meson_vid_pll_div_data(clk);
> + const struct vid_pll_div *div;
> +
> + div = _get_table_val(meson_parm_read(clk->map, &pll_div->val),
> + meson_parm_read(clk->map, &pll_div->sel));
> + if (!div || !div->frac_top) {
> + pr_info("%s: Invalid config value for vid_pll_div\n", __func__);
> + return parent_rate;
> + }
> +
> + return DIV_ROUND_UP_ULL(parent_rate * div->frac_bot, div->frac_top);
with the rename above this would read:
return DIV_ROUND_UP_ULL(parent_rate * div->multiplier, div->divider);


Regards
Martin

\
 
 \ /
  Last update: 2018-07-20 21:19    [W:0.069 / U:23.468 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site