lkml.org 
[lkml]   [2018]   [Jul]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC net-next 15/15] net: lora: Add Semtech SX1301
On Sun, Jul 01, 2018 at 01:08:04PM +0200, Andreas Färber wrote:

> +static void sx1301_radio_spi_set_cs(struct spi_device *spi, bool enable)
> +{
> + int ret;
> +
> + dev_dbg(&spi->dev, "setting SPI CS to %s\n", enable ? "1" : "0");
> +
> + if (enable)
> + return;
> +
> + ret = sx1301_radio_set_cs(spi->controller, enable);
> + if (ret)
> + dev_warn(&spi->dev, "failed to write CS (%d)\n", ret);
> +}

So we never disable chip select?

> + if (tx_buf) {
> + ret = sx1301_write(ssx->parent, ssx->regs + REG_RADIO_X_ADDR, tx_buf ? tx_buf[0] : 0);

This looks confused. We're in an if (tx_buf) block but there's a use of
the ternery operator that appears to be checking if we have a tx_buf?

> + if (ret) {
> + dev_err(&spi->dev, "SPI radio address write failed\n");
> + return ret;
> + }
> +
> + ret = sx1301_write(ssx->parent, ssx->regs + REG_RADIO_X_DATA, (tx_buf && xfr->len >= 2) ? tx_buf[1] : 0);
> + if (ret) {
> + dev_err(&spi->dev, "SPI radio data write failed\n");
> + return ret;
> + }

This looks awfully like you're coming in at the wrong abstraction layer
and the hardware actually implements a register abstraction rather than
a SPI one so you should be using regmap as the abstraction.

> + if (rx_buf) {
> + ret = sx1301_read(ssx->parent, ssx->regs + REG_RADIO_X_DATA_READBACK, &rx_buf[xfr->len - 1]);
> + if (ret) {
> + dev_err(&spi->dev, "SPI radio data read failed\n");
> + return ret;
> + }
> + }

For a read we never set an address?

> +static void sx1301_radio_setup(struct spi_controller *ctrl)
> +{
> + ctrl->mode_bits = SPI_CS_HIGH | SPI_NO_CS;

This controller has no chip select but we provided a set_cs operation?
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-07-02 18:14    [W:0.358 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site