lkml.org 
[lkml]   [2018]   [Jul]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/8] Tegra Combined UART driver
Date
Hi, here's v3. Changes are in individual patches. Acks are still
missing from the following patches:

mailbox: Add transmit done by blocking option
mailbox: tegra-hsp: Refactor in preparation of mailboxes
mailbox: tegra-hsp: Add support for shared mailboxes
serial: Add Tegra Combined UART driver

Thanks,
Mikko

Original message:

Hi all,

on Tegra194, the primary console UART is the "Tegra Combined UART",
or TCU. This is a "virtual UART", where each consumer communicates
with a central implementation over mailboxes. The central
implementation then multiplexes the streams and arbitrates use of
a hardware serial port. This driver implements the consumer portion
to allow using the primary console.

The series is split into the following parts:
* patches 1 and 2 add the device tree bindings for mailbox and tcu
itself.
* patch 3 adds a blocking transmission option to the mailbox
framework.
* patches 4 and 5 add support for the "shared mailbox" primitive
to the Tegra HSP driver.
* patch 6 adds the TCU driver itself
* patches 7 and 8 do the necessary device tree changes.

The series has been tested on the Tegra194 P2972 board.

Mikko Perttunen (8):
dt-bindings: tegra186-hsp: Add shared interrupts
dt-bindings: serial: Add bindings for nvidia,tegra194-tcu
mailbox: Add transmit done by blocking option
mailbox: tegra-hsp: Refactor in preparation of mailboxes
mailbox: tegra-hsp: Add support for shared mailboxes
serial: Add Tegra Combined UART driver
arm64: tegra: Add nodes for tcu on Tegra194
arm64: tegra: Mark tcu as primary serial port on Tegra194 P2888

.../bindings/mailbox/nvidia,tegra186-hsp.txt | 3 +
.../bindings/serial/nvidia,tegra194-tcu.txt | 35 +++
arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 2 +-
arch/arm64/boot/dts/nvidia/tegra194.dtsi | 34 ++-
drivers/mailbox/mailbox.c | 30 +-
drivers/mailbox/mailbox.h | 1 +
drivers/mailbox/tegra-hsp.c | 320 +++++++++++++++++----
drivers/tty/serial/Kconfig | 9 +
drivers/tty/serial/Makefile | 1 +
drivers/tty/serial/tegra-tcu.c | 291 +++++++++++++++++++
include/uapi/linux/serial_core.h | 3 +
11 files changed, 661 insertions(+), 68 deletions(-)
create mode 100644 Documentation/devicetree/bindings/serial/nvidia,tegra194-tcu.txt
create mode 100644 drivers/tty/serial/tegra-tcu.c

--
2.16.1

\
 
 \ /
  Last update: 2018-07-02 13:44    [W:0.124 / U:6.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site