lkml.org 
[lkml]   [2018]   [Jul]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RESEND PATCH v5 0/6] IR support for A83T
From
Date
Sorry, that got lost...

I will resubmit / update the patches next week.

Philipp

On 10.07.2018 10:36, Sean Young wrote:
> On Fri, Mar 02, 2018 at 01:11:34PM +0100, Philipp Rossak wrote:
>>
>>
>> On 13.02.2018 13:29, Philipp Rossak wrote:
>>> This patch series adds support for the sunxi A83T ir module and enhances
>>> the sunxi-ir driver. Right now the base clock frequency for the ir driver
>>> is a hard coded define and is set to 8 MHz.
>>> This works for the most common ir receivers. On the Sinovoip Bananapi M3
>>> the ir receiver needs, a 3 MHz base clock frequency to work without
>>> problems with this driver.
>>>
>>> This patch series adds support for an optinal property that makes it able
>>> to override the default base clock frequency and enables the ir interface
>>> on the a83t and the Bananapi M3.
>>>
>>> changes since v4:
>>> * rename cir pin from cir_pins to r_cir_pin
>>> * drop unit-adress from r_cir_pin
>>> * add a83t compatible to the cir node
>>> * move muxing options to dtsi
>>> * rename cir label and reorder it in the bananpim3.dts file
>>>
>>> changes since v3:
>>> * collecting all acks & reviewd by
>>> * fixed typos
>>>
>>> changes since v2:
>>> * reorder cir pin (alphabetical)
>>> * fix typo in documentation
>>>
>>> changes since v1:
>>> * fix typos, reword Documentation
>>> * initialize 'b_clk_freq' to 'SUNXI_IR_BASE_CLK' & remove if statement
>>> * change dev_info() to dev_dbg()
>>> * change naming to cir* in dts/dtsi
>>> * Added acked Ackedi-by to related patch
>>> * use whole memory block instead of registers needed + fix for h3/h5
>>>
>>> changes since rfc:
>>> * The property is now optinal. If the property is not available in
>>> the dtb the driver uses the default base clock frequency.
>>> * the driver prints out the the selected base clock frequency.
>>> * changed devicetree property from base-clk-frequency to clock-frequency
>>>
>>> Regards,
>>> Philipp
>>>
>>> Philipp Rossak (6):
>>> media: rc: update sunxi-ir driver to get base clock frequency from
>>> devicetree
>>> media: dt: bindings: Update binding documentation for sunxi IR
>>> controller
>>> arm: dts: sun8i: a83t: Add the cir pin for the A83T
>>> arm: dts: sun8i: a83t: Add support for the cir interface
>>> arm: dts: sun8i: a83t: bananapi-m3: Enable IR controller
>>> arm: dts: sun8i: h3-h5: ir register size should be the whole memory
>>> block
>>>
>>> Documentation/devicetree/bindings/media/sunxi-ir.txt | 3 +++
>>> arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts | 5 +++++
>>> arch/arm/boot/dts/sun8i-a83t.dtsi | 18 ++++++++++++++++++
>>> arch/arm/boot/dts/sunxi-h3-h5.dtsi | 2 +-
>>> drivers/media/rc/sunxi-cir.c | 19 +++++++++++--------
>>> 5 files changed, 38 insertions(+), 9 deletions(-)
>>>
>>
>> I talked yesterday with Maxime about this patch series. And he told me if
>> the first to patches got merged, he will apply the dts patches to the sunxi
>> tree.
>>
>> Sean, can you merge the first two patches through the rc-core?
>
> So I merged the first two patches, but the rest never made it upstream.
>
> Should they be resubmitted?
>
> Thanks,
>
> Sean
>
\
 
 \ /
  Last update: 2018-07-15 22:07    [W:0.062 / U:3.420 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site