lkml.org 
[lkml]   [2018]   [Jul]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v6 4/8] interconnect: qcom: Add RPM communication
On Mon, Jul 9, 2018 at 8:51 AM Georgi Djakov <georgi.djakov@linaro.org> wrote:
>
> On some Qualcomm SoCs, there is a remote processor, which controls some of
> the Network-On-Chip interconnect resources. Other CPUs express their needs
> by communicating with this processor. Add a driver to handle communication
> with this remote processor.
>
> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
> ---
> .../bindings/interconnect/qcom-smd.txt | 32 +++++++
> drivers/interconnect/qcom/Kconfig | 11 +++
> drivers/interconnect/qcom/Makefile | 2 +
> drivers/interconnect/qcom/smd-rpm.c | 91 +++++++++++++++++++
> drivers/interconnect/qcom/smd-rpm.h | 15 +++
> 5 files changed, 151 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/interconnect/qcom-smd.txt
> create mode 100644 drivers/interconnect/qcom/Kconfig
> create mode 100644 drivers/interconnect/qcom/Makefile
> create mode 100644 drivers/interconnect/qcom/smd-rpm.c
> create mode 100644 drivers/interconnect/qcom/smd-rpm.h
>
> diff --git a/Documentation/devicetree/bindings/interconnect/qcom-smd.txt b/Documentation/devicetree/bindings/interconnect/qcom-smd.txt
> new file mode 100644
> index 000000000000..88a5aeb50935
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interconnect/qcom-smd.txt
> @@ -0,0 +1,32 @@
> +Qualcomm SMD-RPM interconnect driver binding
> +------------------------------------------------
> +The RPM (Resource Power Manager) is a dedicated hardware engine
> +for managing the shared SoC resources in order to keep the lowest
> +power profile. It communicates with other hardware subsystems via
> +the shared memory driver (SMD) back-end and accepts requests for
> +various resources.
> +
> +Required properties :
> +- compatible : shall contain only one of the following:
> + "qcom,interconnect-smd-rpm"
> +
> +Example:
> + smd {
> + compatible = "qcom,smd";
> +
> + rpm {
> + interrupts = <0 168 1>;
> + qcom,ipc = <&apcs 8 0>;
> + qcom,smd-edge = <15>;
> +
> + rpm_requests {
> + compatible = "qcom,rpm-msm8916";
> + qcom,smd-channels = "rpm_requests";
> +
> + interconnect-smd-rpm {
> + compatible = "qcom,interconnect-smd-rpm";
> + };
> +
> + };
> + };
> + };
> diff --git a/drivers/interconnect/qcom/Kconfig b/drivers/interconnect/qcom/Kconfig
> new file mode 100644
> index 000000000000..b0c2ff928d88
> --- /dev/null
> +++ b/drivers/interconnect/qcom/Kconfig
> @@ -0,0 +1,11 @@
> +config INTERCONNECT_QCOM
> + bool "Qualcomm Network-on-Chip interconnect drivers"
> + depends on INTERCONNECT
> + depends on ARCH_QCOM || COMPILE_TEST
> +
> +config INTERCONNECT_QCOM_SMD_RPM
> + tristate "Qualcomm SMD RPM interconnect driver"
> + depends on INTERCONNECT_QCOM

Should this also depend on CONFIG_QCOM_SMD_RPM, since it uses
qcom_rpm_smd_write?

> + help
> + This is a driver for communicating interconnect related configuration
> + details with a remote processor (RPM) on Qualcomm platforms.
...
> diff --git a/drivers/interconnect/qcom/smd-rpm.h b/drivers/interconnect/qcom/smd-rpm.h
> new file mode 100644
> index 000000000000..c33b91a3dd51
> --- /dev/null
> +++ b/drivers/interconnect/qcom/smd-rpm.h
> @@ -0,0 +1,15 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2018, Linaro Ltd.
> + * Author: Georgi Djakov <georgi.djakov@linaro.org>
> + */
> +
> +#ifndef __DRIVERS_INTERCONNECT_QCOM_RPM_H
> +#define __DRIVERS_INTERCONNECT_QCOM_RPM_H

Nit: this still doesn't quite match, it would need an _SMD like:
__DRIVERS_INTERCONNECT_QCOM_SMD_RPM_H

> +
> +#include <linux/soc/qcom/smd-rpm.h>
> +
> +bool qcom_icc_rpm_smd_available(void);
> +int qcom_icc_rpm_smd_send(int ctx, int rsc_type, int id, u32 val);
> +
> +#endif

\
 
 \ /
  Last update: 2018-07-11 00:41    [W:0.200 / U:0.620 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site