lkml.org 
[lkml]   [2018]   [Jul]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1] ARM: dts: imx6sl-evk: keep sw4 always on
On Mon, Jun 25, 2018 at 08:34:11PM +0800, Robin Gong wrote:
> SW4 is one power rail for LPDDR2 on i.mx6sl-evk, so it should
> be kept always on. But it's disabled after switch disabled
> interface implemented in pfuze driver
> 'commit 5fe156f1cab4
> ("regulator: pfuze100: add enable/disable for switch")'.Thus,
> it breaks kernel bootup. Add 'regulator-always-on' for SW4.
>
> Signed-off-by: Robin Gong <yibin.gong@nxp.com>

Does that mean boards with existing DTB installed will stop working with
new kernel? That's bad, and the kernel commit should probably be
reverted.

Shawn

> ---
> arch/arm/boot/dts/imx6sl-evk.dts | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
> index 37e792f..798df66 100644
> --- a/arch/arm/boot/dts/imx6sl-evk.dts
> +++ b/arch/arm/boot/dts/imx6sl-evk.dts
> @@ -199,6 +199,7 @@
> sw4_reg: sw4 {
> regulator-min-microvolt = <800000>;
> regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> };
>
> swbst_reg: swbst {
> --
> 2.7.4
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

\
 
 \ /
  Last update: 2018-07-01 11:34    [W:0.087 / U:2.936 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site