[lkml]   [2018]   [Jun]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v8 0/5] arm: Base support for Renesas RZN1D-DB Board
This series adds the plain basic support for booting a bare
kernel on the RZ/N1D-DB Board. It's been trimmed to the strict
minimum as a 'base', further patches that could add the
rest of the support.

Note on the clock driver: Current usage of the clocks on Linux
involves Linux 'claiming' all of them, disabling the one it doesn't
need and so on.
On *this* architecture it can't be done, there is at least one other
OS running on the CM3 core that claims it's own clock; Linux can claim
some others but definitely not start disabling stuff it isn't supposed to.

Thanks for the comments on the previous versions!

+ Added Reviewed mentions as appropriate.
+ Moved some of the clocks #defines into the driver
+ Tweaked the pointer arithmetics in the clock driver.
+ Removed clk_readl/writel
+ Use CLK_IS_CRITICAL instead of my own flag
+ Also added that critical section to the dualgate object.
+ Few other nitpicks fixed.
+ Rebased on next-20180604
+ Removed mention of 'rz[/]n1' from everywhere.
+ Removed unwanted documentation.
+ Renamed clock node back to sysctrl.
+ Renamed rzn1-clocks.h to r9a06g032-sysctrl.h to match
+ Made the clock driver claim the sysctrl node.
+ Fixed a couple of 'sparse' warning in the clock driver.
+ Fix for suggestion by Geert Uytterhoeven
+ Removed "renesas,rzn1" from the board bindings
+ Removed patches already merged.
+ Removed reboot driver
+ Added a whole clock infrastructure.
+ Rebased on next-20180517
+ Given the problems I have with getting in some structure around the
sysctrl block, I've removed the MFD, I've now attached the reboot
driver on it's own pair of registers.
+ Rebased on next-20180417
+ Fixes for suggestions by Simon Horman
+ Fixes for suggestions by Jacopo Mondi
+ Fixes for suggestions by Geert Uytterhoeven
+ Renamed the r9a06g0xx.dtsi file, given up on trying to get a family
common file in, so dropped potential RZ/N1S support and now only
focus on RZ/N1D for this patchset.
+ Added 'always-on' to the architected timer node, because it is.
+ Added ARCH_R9A06G032, to match others patterns like RCAR
+ Sorted the .dts files, added empty lines as required.
+ Fixed patch prefixes to match git-log for bindings&dts
+ Merged board .dts & Makefile changes together
+ Rebased on next-20180410
+ Fixes for suggestions by Geert Uytterhoeven
+ Removed SoC Specific renesas,r9a06g032-xxx, as it's not needed for now.
+ Kept renesas,rzn1 as a family/generic for this family.
+ Fixed a couple of the commit messages.
+ Added Geert's Reviewed-By where appropriate.
+ Fixes for suggestions by Simon Horman
+ Fixes for suggestions by Rob Herring
+ Fixes for suggestions by Geert Uytterhoeven
+ Removed the mach file
+ Added a MFD base for the sysctrl block
+ Added a regmap based sub driver for the reboot handler
+ Renamed the files to match shmobile conventions
+ Adapted the compatible= strings to reflect 'family' vs 'part'
+ Removed the sysctrl.h file entirelly.
+ Fixed every warnings from the DTC compiler on W=12 mode.
+ Split the device-tree patches from the code.

Michel Pollet (5):
dt-bindings: Add the r9a06g032-sysctrl.h file
dt-bindings: clock: renesas,r9a06g032-sysctrl: documentation
ARM: dts: Renesas R9A06G032 base device tree file
ARM: dts: Renesas RZN1D-DB Board base file
clk: renesas: Renesas R9A06G032 clock driver

.../bindings/clock/renesas,r9a06g032-sysctrl.txt | 32 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts | 28 +
arch/arm/boot/dts/r9a06g032.dtsi | 86 +++
drivers/clk/renesas/Kconfig | 6 +
drivers/clk/renesas/Makefile | 1 +
drivers/clk/renesas/r9a06g032-clocks.c | 853 +++++++++++++++++++++
include/dt-bindings/clock/r9a06g032-sysctrl.h | 148 ++++
8 files changed, 1155 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.txt
create mode 100644 arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts
create mode 100644 arch/arm/boot/dts/r9a06g032.dtsi
create mode 100644 drivers/clk/renesas/r9a06g032-clocks.c
create mode 100644 include/dt-bindings/clock/r9a06g032-sysctrl.h


 \ /
  Last update: 2018-06-05 10:36    [W:0.333 / U:1.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site