lkml.org 
[lkml]   [2018]   [Jun]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] mtd: spi-nor: cadence-quadspi: Fix direct mode write timeouts
Date
Sometimes when writing large size files to flash in direct/memory mapped
mode, it is seen that flash write enable command times out with error:
[ 503.146293] cadence-qspi 47040000.ospi: Flash command execution timed out.

This is because, we need to make sure previous direct write operation
is complete by polling for IDLE bit in CONFIG_REG before starting the
next operation.

Fix this by polling for IDLE bit after memory mapped write.

Fixes: a27f2eaf2b27 ("mtd: spi-nor: cadence-quadspi: Add support for direct access mode")
Cc: stable@vger.kernel.org
Signed-off-by: Vignesh R <vigneshr@ti.com>
---
drivers/mtd/spi-nor/cadence-quadspi.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c
index c3f7aaa5d18f..d7e10b36a0b9 100644
--- a/drivers/mtd/spi-nor/cadence-quadspi.c
+++ b/drivers/mtd/spi-nor/cadence-quadspi.c
@@ -926,10 +926,12 @@ static ssize_t cqspi_write(struct spi_nor *nor, loff_t to,
if (ret)
return ret;

- if (f_pdata->use_direct_mode)
+ if (f_pdata->use_direct_mode) {
memcpy_toio(cqspi->ahb_base + to, buf, len);
- else
+ ret = cqspi_wait_idle(cqspi);
+ } else {
ret = cqspi_indirect_write_execute(nor, to, buf, len);
+ }
if (ret)
return ret;

--
2.18.0
\
 
 \ /
  Last update: 2018-06-30 12:55    [W:0.038 / U:8.484 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site