lkml.org 
[lkml]   [2018]   [Jun]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5] ARM: dts: imx51-zii-rdu1: fix touchscreen pinctrl
On Thu, Jun 21, 2018 at 07:10:00PM +0100, Nick Dyer wrote:
> The pinctrl settings were incorrect for the touchscreen interrupt line, causing
> an interrupt storm. This change has been tested with both the atmel_mxt_ts and
> RMI4 drivers on the RDU1 units.
>
> The value 0x4 comes from the value of register IOMUXC_SW_PAD_CTL_PAD_CSI1_D8
> from the old vendor kernel.
>
> Signed-off-by: Nick Dyer <nick@shmanahar.org>
> Fixes: ceef0396f367 ("ARM: dts: imx: add ZII RDU1 board")
> Cc: <stable@vger.kernel.org> # 4.15+
> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
> Tested-by: Chris Healy <cphealy@gmail.com>

Applied, thanks.

> ---
> Changes in v5:
> - Add tested by Chris Healy
> Changes in v4:
> - Add reviewed by Fabio

You do not have to send new version just for collecting review and test
tags. I will do that when applying.

Shawn

> Changes in v3:
> - Update commit message to add source of 0x4 value, fixes tag and CC stable
> Changes in v2:
> - Use hex, only alter IRQ line config
>
> arch/arm/boot/dts/imx51-zii-rdu1.dts | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts
> index df9eca94d812..8a878687197b 100644
> --- a/arch/arm/boot/dts/imx51-zii-rdu1.dts
> +++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts
> @@ -770,7 +770,7 @@
>
> pinctrl_ts: tsgrp {
> fsl,pins = <
> - MX51_PAD_CSI1_D8__GPIO3_12 0x85
> + MX51_PAD_CSI1_D8__GPIO3_12 0x04
> MX51_PAD_CSI1_D9__GPIO3_13 0x85
> >;
> };
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2018-07-01 05:22    [W:2.316 / U:0.000 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site