lkml.org 
[lkml]   [2018]   [Jun]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 1/2] iio: dac: Add AD5758 support
On Fri, Jun 29, 2018 at 11:38 AM, Stefan Popa <stefan.popa@analog.com> wrote:
> The AD5758 is a single channel DAC with 16-bit precision which uses the
> SPI interface that operates at clock rates up to 50MHz.
>
> The output can be configured as voltage or current and is available on a
> single terminal.
>
> Datasheet:
> http://www.analog.com/media/en/technical-documentation/data-sheets/ad5758.pdf

Thanks for an update.
Few comments below.

> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/spi/spi.h>
> +#include <linux/property.h>
> +#include <linux/delay.h>
> +#include <linux/bsearch.h>

Perhaps keep them ordered?

> +
> +#include <linux/iio/iio.h>
> +#include <linux/iio/sysfs.h>
> +

> +#include <asm/div64.h>

ASM? Hmm...

> +static int cmpfunc(const void *a, const void *b)
> +{
> + return (*(int *)a - *(int *)b);

Surrounding parens are not needed.

> +}
> +

> +static int ad5758_find_closest_match(const int *array,
> + unsigned int size, int val)
> +{
> + int i;
> +
> + for (i = 0; i < size; i++) {
> + if (val <= array[i])
> + return i;
> + }
> +
> + return size - 1;
> +}

Isn't it what bsearch() covers as well?

> + do {
> + ret = ad5758_spi_reg_read(st, reg);
> + if (ret < 0)
> + return ret;
> +
> + if (!(ret & mask))
> + return 0;
> +

> + udelay(100);

If it's not called from atomic context, perhaps switch to usleep_range() ?

> + } while (--timeout);


> +static int ad5758_soft_reset(struct ad5758_state *st)
> +{
> + int ret;
> +
> + ret = ad5758_spi_reg_write(st, AD5758_KEY, AD5758_KEY_CODE_RESET_1);
> + if (ret < 0)
> + return ret;
> +
> + ret = ad5758_spi_reg_write(st, AD5758_KEY, AD5758_KEY_CODE_RESET_2);
> +

> + /* Perform a software reset and wait 100us */
> + udelay(100);

Ditto.

> +
> + return ret;
> +}

> +static int ad5758_find_out_range(struct ad5758_state *st,
> + const struct ad5758_range *range,
> + unsigned int size,
> + int min, int max)
> +{
> + int i;
> +
> + for (i = 0; i < size; i++) {
> + if ((min == range[i].min) && (max == range[i].max)) {
> + st->out_range.reg = range[i].reg;
> + st->out_range.min = range[i].min;
> + st->out_range.max = range[i].max;
> +
> + return 0;
> + }
> + }

One more candidate to use bsearch().

> +
> + return -EINVAL;
> +}

> + index = (int *) bsearch(&tmp, ad5758_dc_dc_ilim,
> + ARRAY_SIZE(ad5758_dc_dc_ilim),
> + sizeof(int), cmpfunc);

I'm not sure you need that casting.

--
With Best Regards,
Andy Shevchenko

\
 
 \ /
  Last update: 2018-06-30 23:27    [W:0.136 / U:3.244 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site