lkml.org 
[lkml]   [2018]   [Jun]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v9 0/6] optimize memblock_next_valid_pfn and early_pfn_valid on arm and arm64
Date
Commit b92df1de5d28 ("mm: page_alloc: skip over regions of invalid pfns
where possible") tried to optimize the loop in memmap_init_zone(). But
there is still some room for improvement.

Patch 1 introduce new config to make codes more generic
Patch 2 remain the memblock_next_valid_pfn on arm and arm64
Patch 3 optimizes the memblock_next_valid_pfn()
Patch 4~6 optimizes the early_pfn_valid()

As for the performance improvement, after this set, I can see the time
overhead of memmap_init() is reduced from 27956us to 13537us in my
armv8a server(QDF2400 with 96G memory, pagesize 64k).

Attached the memblock region information in my server.
[ 0.000000] Zone ranges:
[ 0.000000] DMA32 [mem 0x0000000000200000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000017ffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000200000-0x000000000021ffff]
[ 0.000000] node 0: [mem 0x0000000000820000-0x000000000307ffff]
[ 0.000000] node 0: [mem 0x0000000003080000-0x000000000308ffff]
[ 0.000000] node 0: [mem 0x0000000003090000-0x00000000031fffff]
[ 0.000000] node 0: [mem 0x0000000003200000-0x00000000033fffff]
[ 0.000000] node 0: [mem 0x0000000003410000-0x00000000034fffff]
[ 0.000000] node 0: [mem 0x0000000003500000-0x000000000351ffff]
[ 0.000000] node 0: [mem 0x0000000003520000-0x000000000353ffff]
[ 0.000000] node 0: [mem 0x0000000003540000-0x0000000003e3ffff]
[ 0.000000] node 0: [mem 0x0000000003e40000-0x0000000003e7ffff]
[ 0.000000] node 0: [mem 0x0000000003e80000-0x0000000003ecffff]
[ 0.000000] node 0: [mem 0x0000000003ed0000-0x0000000003ed5fff]
[ 0.000000] node 0: [mem 0x0000000003ed6000-0x0000000006eeafff]
[ 0.000000] node 0: [mem 0x0000000006eeb000-0x000000000710ffff]
[ 0.000000] node 0: [mem 0x0000000007110000-0x0000000007f0ffff]
[ 0.000000] node 0: [mem 0x0000000007f10000-0x0000000007faffff]
[ 0.000000] node 0: [mem 0x0000000007fb0000-0x000000000806ffff]
[ 0.000000] node 0: [mem 0x0000000008070000-0x00000000080affff]
[ 0.000000] node 0: [mem 0x00000000080b0000-0x000000000832ffff]
[ 0.000000] node 0: [mem 0x0000000008330000-0x000000000836ffff]
[ 0.000000] node 0: [mem 0x0000000008370000-0x000000000838ffff]
[ 0.000000] node 0: [mem 0x0000000008390000-0x00000000083a9fff]
[ 0.000000] node 0: [mem 0x00000000083aa000-0x00000000083bbfff]
[ 0.000000] node 0: [mem 0x00000000083bc000-0x00000000083fffff]
[ 0.000000] node 0: [mem 0x0000000008400000-0x000000000841ffff]
[ 0.000000] node 0: [mem 0x0000000008420000-0x000000000843ffff]
[ 0.000000] node 0: [mem 0x0000000008440000-0x000000000865ffff]
[ 0.000000] node 0: [mem 0x0000000008660000-0x000000000869ffff]
[ 0.000000] node 0: [mem 0x00000000086a0000-0x00000000086affff]
[ 0.000000] node 0: [mem 0x00000000086b0000-0x00000000086effff]
[ 0.000000] node 0: [mem 0x00000000086f0000-0x0000000008b6ffff]
[ 0.000000] node 0: [mem 0x0000000008b70000-0x0000000008bbffff]
[ 0.000000] node 0: [mem 0x0000000008bc0000-0x0000000008edffff]
[ 0.000000] node 0: [mem 0x0000000008ee0000-0x0000000008ee0fff]
[ 0.000000] node 0: [mem 0x0000000008ee1000-0x0000000008ee2fff]
[ 0.000000] node 0: [mem 0x0000000008ee3000-0x000000000decffff]
[ 0.000000] node 0: [mem 0x000000000ded0000-0x000000000defffff]
[ 0.000000] node 0: [mem 0x000000000df00000-0x000000000fffffff]
[ 0.000000] node 0: [mem 0x0000000010800000-0x0000000017feffff]
[ 0.000000] node 0: [mem 0x000000001c000000-0x000000001c00ffff]
[ 0.000000] node 0: [mem 0x000000001c010000-0x000000001c7fffff]
[ 0.000000] node 0: [mem 0x000000001c810000-0x000000007efbffff]
[ 0.000000] node 0: [mem 0x000000007efc0000-0x000000007efdffff]
[ 0.000000] node 0: [mem 0x000000007efe0000-0x000000007efeffff]
[ 0.000000] node 0: [mem 0x000000007eff0000-0x000000007effffff]
[ 0.000000] node 0: [mem 0x000000007f000000-0x00000017ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000017ffffffff]
[ 0.000000] On node 0 totalpages: 25145296
[ 0.000000] DMA32 zone: 16376 pages used for memmap
[ 0.000000] DMA32 zone: 0 pages reserved
[ 0.000000] DMA32 zone: 1028048 pages, LIFO batch:31
[ 0.000000] Normal zone: 376832 pages used for memmap
[ 0.000000] Normal zone: 24117248 pages, LIFO batch:31

Changelog:
V9: - rebase to mmotm master, refine the log description. No major changes
V8: - introduce new config and move generic code to early_pfn.h
- optimize memblock_next_valid_pfn as suggested by Matthew Wilcox
V7: - fix i386 compilation error. refine the commit description
V6: - simplify the codes, move arm/arm64 common codes to one file.
- refine patches as suggested by Danial Vacek and Ard Biesheuvel
V5: - further refining as suggested by Danial Vacek. Make codes
arm/arm64 more arch specific
V4: - refine patches as suggested by Danial Vacek and Wei Yang
- optimized on arm besides arm64
V3: - fix 2 issues reported by kbuild test robot
V2: - rebase to mmotm latest
- remain memblock_next_valid_pfn on arm64
- refine memblock_search_pfn_regions and pfn_valid_region

Jia He (6):
arm: arm64: introduce CONFIG_HAVE_MEMBLOCK_PFN_VALID
mm: page_alloc: remain memblock_next_valid_pfn() on arm/arm64
arm: arm64: page_alloc: reduce unnecessary binary search in
memblock_next_valid_pfn()
mm/memblock: introduce memblock_search_pfn_regions()
arm: arm64: introduce pfn_valid_region()
mm: page_alloc: reduce unnecessary binary search in early_pfn_valid()

arch/arm/Kconfig | 4 +++
arch/arm/mm/init.c | 1 +
arch/arm64/Kconfig | 4 +++
arch/arm64/mm/init.c | 1 +
include/linux/early_pfn.h | 79 +++++++++++++++++++++++++++++++++++++++++++++++
include/linux/memblock.h | 2 ++
include/linux/mmzone.h | 18 ++++++++++-
mm/Kconfig | 3 ++
mm/memblock.c | 9 ++++++
mm/page_alloc.c | 5 ++-
10 files changed, 124 insertions(+), 2 deletions(-)
create mode 100644 include/linux/early_pfn.h

--
1.8.3.1

\
 
 \ /
  Last update: 2018-06-29 04:30    [W:0.219 / U:1.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site