lkml.org 
[lkml]   [2018]   [Jun]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [linux-sunxi] [PATCH v3 24/24] ARM: dts: sun8i: r40: Enable HDMI output on BananaPi M2 Ultra
On Mon, Jun 25, 2018 at 8:03 PM, Jernej Skrabec <jernej.skrabec@siol.net> wrote:
> Since HDMI can be considered as main output, most capable mixer is
> connected to it (mixer0).
>
> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
> ---
> .../boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 45 +++++++++++++++++++
> 1 file changed, 45 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
> index 27d9ccd0ef2f..0ebc2f9a980e 100644
> --- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
> +++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
> @@ -58,6 +58,17 @@
> stdout-path = "serial0:115200n8";
> };
>
> + connector {
> + compatible = "hdmi-connector";
> + type = "a";
> +
> + port {
> + hdmi_con_in: endpoint {
> + remote-endpoint = <&hdmi_out_con>;
> + };
> + };
> + };
> +
> leds {
> compatible = "gpio-leds";
>
> @@ -93,6 +104,10 @@
> };
> };
>
> +&de {
> + status = "okay";
> +};
> +
> &ehci1 {
> status = "okay";
> };
> @@ -101,6 +116,16 @@
> status = "okay";
> };
>
> +&hdmi {
> + status = "okay";
> +};
> +
> +&hdmi_out {
> + hdmi_out_con: endpoint {
> + remote-endpoint = <&hdmi_con_in>;
> + };
> +};
> +
> &i2c0 {
> status = "okay";
>
> @@ -195,6 +220,26 @@
> status = "okay";
> };
>
> +&tcon_top_hdmi_in_tcon_tv0 {
> + remote-endpoint = <&tcon_tv0_out_tcon_top>;
> +};
> +
> +&tcon_top_mixer0_out_tcon_tv0 {
> + remote-endpoint = <&tcon_tv0_in_tcon_top>;
> +};
> +
> +&tcon_tv0_in {
> + tcon_tv0_in_tcon_top: endpoint {
> + remote-endpoint = <&tcon_top_mixer0_out_tcon_tv0>;
> + };
> +};
> +
> +&tcon_tv0_out {
> + tcon_tv0_out_tcon_top: endpoint {
> + remote-endpoint = <&tcon_top_hdmi_in_tcon_tv0>;
> + };
> +};
> +

This is the wrong place for this. Once removed,

Reviewed-by: Chen-Yu Tsai <wens@csie.org>

> &uart0 {
> pinctrl-names = "default";
> pinctrl-0 = <&uart0_pb_pins>;
> --
> 2.18.0
>
> --
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

\
 
 \ /
  Last update: 2018-06-28 04:52    [W:0.442 / U:2.600 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site