lkml.org 
[lkml]   [2018]   [Jun]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 23/24] ARM: dts: sun8i: r40: Add HDMI pipeline
On Mon, Jun 25, 2018 at 8:03 PM, Jernej Skrabec <jernej.skrabec@siol.net> wrote:
> Add all entries needed for HDMI to function properly.
>
> Since R40 has highly configurable pipeline, both mixers and both TCON
> TVs are added. Board specific DT should then connect them together
> trough TCON TOP muxers to best fit the purpose of the board.
>
> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
> ---
> arch/arm/boot/dts/sun8i-r40.dtsi | 269 +++++++++++++++++++++++++++++++
> 1 file changed, 269 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
> index 173dcc1652d2..a2a75fb04caf 100644
> --- a/arch/arm/boot/dts/sun8i-r40.dtsi
> +++ b/arch/arm/boot/dts/sun8i-r40.dtsi
> @@ -42,8 +42,11 @@
> */
>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/sun8i-de2.h>
> #include <dt-bindings/clock/sun8i-r40-ccu.h>
> +#include <dt-bindings/clock/sun8i-tcon-top.h>
> #include <dt-bindings/reset/sun8i-r40-ccu.h>
> +#include <dt-bindings/reset/sun8i-de2.h>
>
> / {
> #address-cells = <1>;
> @@ -99,12 +102,76 @@
> };
> };
>
> + de: display-engine {
> + compatible = "allwinner,sun8i-r40-display-engine",
> + "allwinner,sun8i-h3-display-engine";

Given that the display pipeline looks different, they should not be
compatible.

> + allwinner,pipelines = <&mixer0>, <&mixer1>;
> + status = "disabled";
> + };
> +
> soc {
> compatible = "simple-bus";
> #address-cells = <1>;
> #size-cells = <1>;
> ranges;
>
> + display_clocks: clock@1000000 {
> + compatible = "allwinner,sun8i-r40-de2-clk",
> + "allwinner,sun8i-h3-de2-clk";
> + reg = <0x01000000 0x100000>;
> + clocks = <&ccu CLK_DE>,
> + <&ccu CLK_BUS_DE>;
> + clock-names = "mod",
> + "bus";
> + resets = <&ccu RST_BUS_DE>;
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + };
> +
> + mixer0: mixer@1100000 {
> + compatible = "allwinner,sun8i-r40-de2-mixer-0";
> + reg = <0x01100000 0x100000>;
> + clocks = <&display_clocks CLK_BUS_MIXER0>,
> + <&display_clocks CLK_MIXER0>;
> + clock-names = "bus",
> + "mod";
> + resets = <&display_clocks RST_MIXER0>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + mixer0_out: port@1 {
> + reg = <1>;
> + mixer0_out_tcon_top: endpoint {
> + remote-endpoint = <&tcon_top_mixer0_in_mixer0>;
> + };
> + };
> + };
> + };
> +
> + mixer1: mixer@1200000 {
> + compatible = "allwinner,sun8i-r40-de2-mixer-1";
> + reg = <0x01200000 0x100000>;
> + clocks = <&display_clocks CLK_BUS_MIXER1>,
> + <&display_clocks CLK_MIXER1>;
> + clock-names = "bus",
> + "mod";
> + resets = <&display_clocks RST_WB>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + mixer1_out: port@1 {
> + reg = <1>;
> + mixer1_out_tcon_top: endpoint {
> + remote-endpoint = <&tcon_top_mixer1_in_mixer1>;
> + };
> + };
> + };
> + };
> +
> nmi_intc: interrupt-controller@1c00030 {
> compatible = "allwinner,sun7i-a20-sc-nmi";
> interrupt-controller;
> @@ -451,6 +518,163 @@
> #size-cells = <0>;
> };
>
> + tcon_top: tcon-top@1c70000 {
> + compatible = "allwinner,sun8i-r40-tcon-top";
> + reg = <0x01c70000 0x1000>;
> + clocks = <&ccu CLK_BUS_TCON_TOP>,
> + <&ccu CLK_TCON_TV0>,
> + <&ccu CLK_TVE0>,
> + <&ccu CLK_TCON_TV1>,
> + <&ccu CLK_TVE1>,
> + <&ccu CLK_DSI_DPHY>;
> + clock-names = "bus",
> + "tcon-tv0",
> + "tve0",
> + "tcon-tv1",
> + "tve1",
> + "dsi";
> + clock-output-names = "tcon-top-tv0",
> + "tcon-top-tv1",
> + "tcon-top-dsi";
> + resets = <&ccu RST_BUS_TCON_TOP>;
> + #clock-cells = <1>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + tcon_top_mixer0_in: port@0 {
> + reg = <0>;
> +
> + tcon_top_mixer0_in_mixer0: endpoint {
> + remote-endpoint = <&mixer0_out_tcon_top>;
> + };
> + };
> +
> + tcon_top_mixer0_out: port@1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <1>;
> +
> + tcon_top_mixer0_out_tcon_lcd0: endpoint@0 {
> + reg = <0>;
> + };
> +
> + tcon_top_mixer0_out_tcon_lcd1: endpoint@1 {
> + reg = <1>;
> + };
> +
> + tcon_top_mixer0_out_tcon_tv0: endpoint@2 {
> + reg = <2>;
> + };
> +
> + tcon_top_mixer0_out_tcon_tv1: endpoint@3 {
> + reg = <3>;
> + };
> + };
> +
> + tcon_top_mixer1_in: port@2 {
> + reg = <2>;
> +
> + tcon_top_mixer1_in_mixer1: endpoint {
> + remote-endpoint = <&mixer1_out_tcon_top>;
> + };
> + };
> +
> + tcon_top_mixer1_out: port@3 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <3>;
> +
> + tcon_top_mixer1_out_tcon_lcd0: endpoint@0 {
> + reg = <0>;
> + };
> +
> + tcon_top_mixer1_out_tcon_lcd1: endpoint@1 {
> + reg = <1>;
> + };
> +
> + tcon_top_mixer1_out_tcon_tv0: endpoint@2 {
> + reg = <2>;
> + };
> +
> + tcon_top_mixer1_out_tcon_tv1: endpoint@3 {
> + reg = <3>;
> + };
> + };
> +
> + tcon_top_hdmi_in: port@4 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <4>;
> +
> + tcon_top_hdmi_in_tcon_tv0: endpoint@0 {
> + reg = <0>;
> + };
> +
> + tcon_top_hdmi_in_tcon_tv1: endpoint@1 {
> + reg = <1>;
> + };
> + };
> +
> + tcon_top_hdmi_out: port@5 {
> + reg = <5>;
> +
> + tcon_top_hdmi_out_hdmi: endpoint {
> + remote-endpoint = <&hdmi_in_tcon_top>;
> + };
> + };
> + };
> + };
> +
> + tcon_tv0: lcd-controller@1c73000 {
> + compatible = "allwinner,sun8i-r40-tcon-tv",
> + "allwinner,sun8i-a83t-tcon-tv";
> + reg = <0x01c73000 0x1000>;
> + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top 0>;
> + clock-names = "ahb", "tcon-ch1";
> + resets = <&ccu RST_BUS_TCON_TV0>;
> + reset-names = "lcd";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + tcon_tv0_in: port@0 {
> + reg = <0>;
> + };
> +
> + tcon_tv0_out: port@1 {
> + reg = <1>;
> + };
> + };
> + };
> +
> + tcon_tv1: lcd-controller@1c74000 {
> + compatible = "allwinner,sun8i-r40-tcon-tv",
> + "allwinner,sun8i-a83t-tcon-tv";
> + reg = <0x01c74000 0x1000>;
> + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top 1>;
> + clock-names = "ahb", "tcon-ch1";
> + resets = <&ccu RST_BUS_TCON_TV1>;
> + reset-names = "lcd";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + tcon_tv1_in: port@0 {
> + reg = <0>;
> + };
> +
> + tcon_tv1_out: port@1 {
> + reg = <1>;

You are missing the remote-endpoints for all the TCON-TOP <-> TCON connections.
Also, on the driver side, there's no code to handle dynamically mapping mixers
to the TCONs that are being used. In the past we had simple 1:1 mappings. This
is no longer the case, and it needs to be dealt with.

ChenYu

> + };
> + };
> + };
> +
> gic: interrupt-controller@1c81000 {
> compatible = "arm,gic-400";
> reg = <0x01c81000 0x1000>,
> @@ -461,6 +685,51 @@
> #interrupt-cells = <3>;
> interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> };
> +
> + hdmi: hdmi@1ee0000 {
> + compatible = "allwinner,sun8i-r40-dw-hdmi",
> + "allwinner,sun8i-a83t-dw-hdmi";
> + reg = <0x01ee0000 0x10000>;
> + reg-io-width = <1>;
> + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_HDMI0>, <&ccu CLK_HDMI_SLOW>,
> + <&ccu CLK_HDMI>;
> + clock-names = "iahb", "isfr", "tmds";
> + resets = <&ccu RST_BUS_HDMI1>;
> + reset-names = "ctrl";
> + phys = <&hdmi_phy>;
> + phy-names = "hdmi-phy";
> + status = "disabled";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + hdmi_in: port@0 {
> + reg = <0>;
> +
> + hdmi_in_tcon_top: endpoint {
> + remote-endpoint = <&tcon_top_hdmi_out_hdmi>;
> + };
> + };
> +
> + hdmi_out: port@1 {
> + reg = <1>;
> + };
> + };
> + };
> +
> + hdmi_phy: hdmi-phy@1ef0000 {
> + compatible = "allwinner,sun8i-r40-hdmi-phy",
> + "allwinner,sun50i-a64-hdmi-phy";
> + reg = <0x01ef0000 0x10000>;
> + clocks = <&ccu CLK_BUS_HDMI1>, <&ccu CLK_HDMI_SLOW>,
> + <&ccu 7>, <&ccu 16>;
> + clock-names = "bus", "mod", "pll-0", "pll-1";
> + resets = <&ccu RST_BUS_HDMI0>;
> + reset-names = "phy";
> + #phy-cells = <0>;
> + };
> };
>
> timer {
> --
> 2.18.0
>

\
 
 \ /
  Last update: 2018-06-28 04:51    [W:0.372 / U:6.484 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site