lkml.org 
[lkml]   [2018]   [Jun]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 12/24] drm/sun4i: Don't check for panel or bridge on TV TCONs
Date
TV TCONs are always connected to TV or HDMI encoder, so it doesn't make
sense to check if panel or bridge is connected to them.

Check if TCON has channel 0 and only then check for connected panel or
bridges.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
drivers/gpu/drm/sun4i/sun4i_tcon.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
index 761687ebacba..a41c7bb0d557 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -1178,13 +1178,19 @@ static const struct component_ops sun4i_tcon_ops = {
static int sun4i_tcon_probe(struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
+ const struct sun4i_tcon_quirks *quirks;
struct drm_bridge *bridge;
struct drm_panel *panel;
int ret;

- ret = drm_of_find_panel_or_bridge(node, 1, 0, &panel, &bridge);
- if (ret == -EPROBE_DEFER)
- return ret;
+ quirks = of_device_get_match_data(&pdev->dev);
+
+ /* panels and bridges are present only on TCONs with channel 0 */
+ if (quirks->has_channel_0) {
+ ret = drm_of_find_panel_or_bridge(node, 1, 0, &panel, &bridge);
+ if (ret == -EPROBE_DEFER)
+ return ret;
+ }

return component_add(&pdev->dev, &sun4i_tcon_ops);
}
--
2.18.0
\
 
 \ /
  Last update: 2018-06-25 14:06    [W:0.575 / U:2.656 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site